/** * \file * * \brief Instance description for SERCOM2 * * Copyright (c) 2018 Microchip Technology Inc. * * \license_start * * \page License * * SPDX-License-Identifier: Apache-2.0 * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * * \license_stop * */ /* file generated from device description version 2018-05-30T11:07:17Z */ #ifndef _SAML11_SERCOM2_INSTANCE_H_ #define _SAML11_SERCOM2_INSTANCE_H_ /* ========== Register definition for SERCOM2 peripheral ========== */ #if (defined(__ASSEMBLER__) || defined(__IAR_SYSTEMS_ASM__)) #define REG_SERCOM2_I2CM_CTRLA (0x42000C00) /**< (SERCOM2) I2CM Control A */ #define REG_SERCOM2_I2CM_CTRLB (0x42000C04) /**< (SERCOM2) I2CM Control B */ #define REG_SERCOM2_I2CM_BAUD (0x42000C0C) /**< (SERCOM2) I2CM Baud Rate */ #define REG_SERCOM2_I2CM_INTENCLR (0x42000C14) /**< (SERCOM2) I2CM Interrupt Enable Clear */ #define REG_SERCOM2_I2CM_INTENSET (0x42000C16) /**< (SERCOM2) I2CM Interrupt Enable Set */ #define REG_SERCOM2_I2CM_INTFLAG (0x42000C18) /**< (SERCOM2) I2CM Interrupt Flag Status and Clear */ #define REG_SERCOM2_I2CM_STATUS (0x42000C1A) /**< (SERCOM2) I2CM Status */ #define REG_SERCOM2_I2CM_SYNCBUSY (0x42000C1C) /**< (SERCOM2) I2CM Synchronization Busy */ #define REG_SERCOM2_I2CM_ADDR (0x42000C24) /**< (SERCOM2) I2CM Address */ #define REG_SERCOM2_I2CM_DATA (0x42000C28) /**< (SERCOM2) I2CM Data */ #define REG_SERCOM2_I2CM_DBGCTRL (0x42000C30) /**< (SERCOM2) I2CM Debug Control */ #define REG_SERCOM2_I2CS_CTRLA (0x42000C00) /**< (SERCOM2) I2CS Control A */ #define REG_SERCOM2_I2CS_CTRLB (0x42000C04) /**< (SERCOM2) I2CS Control B */ #define REG_SERCOM2_I2CS_INTENCLR (0x42000C14) /**< (SERCOM2) I2CS Interrupt Enable Clear */ #define REG_SERCOM2_I2CS_INTENSET (0x42000C16) /**< (SERCOM2) I2CS Interrupt Enable Set */ #define REG_SERCOM2_I2CS_INTFLAG (0x42000C18) /**< (SERCOM2) I2CS Interrupt Flag Status and Clear */ #define REG_SERCOM2_I2CS_STATUS (0x42000C1A) /**< (SERCOM2) I2CS Status */ #define REG_SERCOM2_I2CS_SYNCBUSY (0x42000C1C) /**< (SERCOM2) I2CS Synchronization Busy */ #define REG_SERCOM2_I2CS_ADDR (0x42000C24) /**< (SERCOM2) I2CS Address */ #define REG_SERCOM2_I2CS_DATA (0x42000C28) /**< (SERCOM2) I2CS Data */ #define REG_SERCOM2_SPI_CTRLA (0x42000C00) /**< (SERCOM2) SPI Control A */ #define REG_SERCOM2_SPI_CTRLB (0x42000C04) /**< (SERCOM2) SPI Control B */ #define REG_SERCOM2_SPI_BAUD (0x42000C0C) /**< (SERCOM2) SPI Baud Rate */ #define REG_SERCOM2_SPI_INTENCLR (0x42000C14) /**< (SERCOM2) SPI Interrupt Enable Clear */ #define REG_SERCOM2_SPI_INTENSET (0x42000C16) /**< (SERCOM2) SPI Interrupt Enable Set */ #define REG_SERCOM2_SPI_INTFLAG (0x42000C18) /**< (SERCOM2) SPI Interrupt Flag Status and Clear */ #define REG_SERCOM2_SPI_STATUS (0x42000C1A) /**< (SERCOM2) SPI Status */ #define REG_SERCOM2_SPI_SYNCBUSY (0x42000C1C) /**< (SERCOM2) SPI Synchronization Busy */ #define REG_SERCOM2_SPI_ADDR (0x42000C24) /**< (SERCOM2) SPI Address */ #define REG_SERCOM2_SPI_DATA (0x42000C28) /**< (SERCOM2) SPI Data */ #define REG_SERCOM2_SPI_DBGCTRL (0x42000C30) /**< (SERCOM2) SPI Debug Control */ #define REG_SERCOM2_USART_CTRLA (0x42000C00) /**< (SERCOM2) USART Control A */ #define REG_SERCOM2_USART_CTRLB (0x42000C04) /**< (SERCOM2) USART Control B */ #define REG_SERCOM2_USART_CTRLC (0x42000C08) /**< (SERCOM2) USART Control C */ #define REG_SERCOM2_USART_BAUD (0x42000C0C) /**< (SERCOM2) USART Baud Rate */ #define REG_SERCOM2_USART_RXPL (0x42000C0E) /**< (SERCOM2) USART Receive Pulse Length */ #define REG_SERCOM2_USART_INTENCLR (0x42000C14) /**< (SERCOM2) USART Interrupt Enable Clear */ #define REG_SERCOM2_USART_INTENSET (0x42000C16) /**< (SERCOM2) USART Interrupt Enable Set */ #define REG_SERCOM2_USART_INTFLAG (0x42000C18) /**< (SERCOM2) USART Interrupt Flag Status and Clear */ #define REG_SERCOM2_USART_STATUS (0x42000C1A) /**< (SERCOM2) USART Status */ #define REG_SERCOM2_USART_SYNCBUSY (0x42000C1C) /**< (SERCOM2) USART Synchronization Busy */ #define REG_SERCOM2_USART_RXERRCNT (0x42000C20) /**< (SERCOM2) USART Receive Error Count */ #define REG_SERCOM2_USART_DATA (0x42000C28) /**< (SERCOM2) USART Data */ #define REG_SERCOM2_USART_DBGCTRL (0x42000C30) /**< (SERCOM2) USART Debug Control */ #else #define REG_SERCOM2_I2CM_CTRLA (*(__IO uint32_t*)0x42000C00U) /**< (SERCOM2) I2CM Control A */ #define REG_SERCOM2_I2CM_CTRLB (*(__IO uint32_t*)0x42000C04U) /**< (SERCOM2) I2CM Control B */ #define REG_SERCOM2_I2CM_BAUD (*(__IO uint32_t*)0x42000C0CU) /**< (SERCOM2) I2CM Baud Rate */ #define REG_SERCOM2_I2CM_INTENCLR (*(__IO uint8_t*)0x42000C14U) /**< (SERCOM2) I2CM Interrupt Enable Clear */ #define REG_SERCOM2_I2CM_INTENSET (*(__IO uint8_t*)0x42000C16U) /**< (SERCOM2) I2CM Interrupt Enable Set */ #define REG_SERCOM2_I2CM_INTFLAG (*(__IO uint8_t*)0x42000C18U) /**< (SERCOM2) I2CM Interrupt Flag Status and Clear */ #define REG_SERCOM2_I2CM_STATUS (*(__IO uint16_t*)0x42000C1AU) /**< (SERCOM2) I2CM Status */ #define REG_SERCOM2_I2CM_SYNCBUSY (*(__I uint32_t*)0x42000C1CU) /**< (SERCOM2) I2CM Synchronization Busy */ #define REG_SERCOM2_I2CM_ADDR (*(__IO uint32_t*)0x42000C24U) /**< (SERCOM2) I2CM Address */ #define REG_SERCOM2_I2CM_DATA (*(__IO uint8_t*)0x42000C28U) /**< (SERCOM2) I2CM Data */ #define REG_SERCOM2_I2CM_DBGCTRL (*(__IO uint8_t*)0x42000C30U) /**< (SERCOM2) I2CM Debug Control */ #define REG_SERCOM2_I2CS_CTRLA (*(__IO uint32_t*)0x42000C00U) /**< (SERCOM2) I2CS Control A */ #define REG_SERCOM2_I2CS_CTRLB (*(__IO uint32_t*)0x42000C04U) /**< (SERCOM2) I2CS Control B */ #define REG_SERCOM2_I2CS_INTENCLR (*(__IO uint8_t*)0x42000C14U) /**< (SERCOM2) I2CS Interrupt Enable Clear */ #define REG_SERCOM2_I2CS_INTENSET (*(__IO uint8_t*)0x42000C16U) /**< (SERCOM2) I2CS Interrupt Enable Set */ #define REG_SERCOM2_I2CS_INTFLAG (*(__IO uint8_t*)0x42000C18U) /**< (SERCOM2) I2CS Interrupt Flag Status and Clear */ #define REG_SERCOM2_I2CS_STATUS (*(__IO uint16_t*)0x42000C1AU) /**< (SERCOM2) I2CS Status */ #define REG_SERCOM2_I2CS_SYNCBUSY (*(__I uint32_t*)0x42000C1CU) /**< (SERCOM2) I2CS Synchronization Busy */ #define REG_SERCOM2_I2CS_ADDR (*(__IO uint32_t*)0x42000C24U) /**< (SERCOM2) I2CS Address */ #define REG_SERCOM2_I2CS_DATA (*(__IO uint8_t*)0x42000C28U) /**< (SERCOM2) I2CS Data */ #define REG_SERCOM2_SPI_CTRLA (*(__IO uint32_t*)0x42000C00U) /**< (SERCOM2) SPI Control A */ #define REG_SERCOM2_SPI_CTRLB (*(__IO uint32_t*)0x42000C04U) /**< (SERCOM2) SPI Control B */ #define REG_SERCOM2_SPI_BAUD (*(__IO uint8_t*)0x42000C0CU) /**< (SERCOM2) SPI Baud Rate */ #define REG_SERCOM2_SPI_INTENCLR (*(__IO uint8_t*)0x42000C14U) /**< (SERCOM2) SPI Interrupt Enable Clear */ #define REG_SERCOM2_SPI_INTENSET (*(__IO uint8_t*)0x42000C16U) /**< (SERCOM2) SPI Interrupt Enable Set */ #define REG_SERCOM2_SPI_INTFLAG (*(__IO uint8_t*)0x42000C18U) /**< (SERCOM2) SPI Interrupt Flag Status and Clear */ #define REG_SERCOM2_SPI_STATUS (*(__IO uint16_t*)0x42000C1AU) /**< (SERCOM2) SPI Status */ #define REG_SERCOM2_SPI_SYNCBUSY (*(__I uint32_t*)0x42000C1CU) /**< (SERCOM2) SPI Synchronization Busy */ #define REG_SERCOM2_SPI_ADDR (*(__IO uint32_t*)0x42000C24U) /**< (SERCOM2) SPI Address */ #define REG_SERCOM2_SPI_DATA (*(__IO uint32_t*)0x42000C28U) /**< (SERCOM2) SPI Data */ #define REG_SERCOM2_SPI_DBGCTRL (*(__IO uint8_t*)0x42000C30U) /**< (SERCOM2) SPI Debug Control */ #define REG_SERCOM2_USART_CTRLA (*(__IO uint32_t*)0x42000C00U) /**< (SERCOM2) USART Control A */ #define REG_SERCOM2_USART_CTRLB (*(__IO uint32_t*)0x42000C04U) /**< (SERCOM2) USART Control B */ #define REG_SERCOM2_USART_CTRLC (*(__IO uint32_t*)0x42000C08U) /**< (SERCOM2) USART Control C */ #define REG_SERCOM2_USART_BAUD (*(__IO uint16_t*)0x42000C0CU) /**< (SERCOM2) USART Baud Rate */ #define REG_SERCOM2_USART_RXPL (*(__IO uint8_t*)0x42000C0EU) /**< (SERCOM2) USART Receive Pulse Length */ #define REG_SERCOM2_USART_INTENCLR (*(__IO uint8_t*)0x42000C14U) /**< (SERCOM2) USART Interrupt Enable Clear */ #define REG_SERCOM2_USART_INTENSET (*(__IO uint8_t*)0x42000C16U) /**< (SERCOM2) USART Interrupt Enable Set */ #define REG_SERCOM2_USART_INTFLAG (*(__IO uint8_t*)0x42000C18U) /**< (SERCOM2) USART Interrupt Flag Status and Clear */ #define REG_SERCOM2_USART_STATUS (*(__IO uint16_t*)0x42000C1AU) /**< (SERCOM2) USART Status */ #define REG_SERCOM2_USART_SYNCBUSY (*(__I uint32_t*)0x42000C1CU) /**< (SERCOM2) USART Synchronization Busy */ #define REG_SERCOM2_USART_RXERRCNT (*(__I uint8_t*)0x42000C20U) /**< (SERCOM2) USART Receive Error Count */ #define REG_SERCOM2_USART_DATA (*(__IO uint16_t*)0x42000C28U) /**< (SERCOM2) USART Data */ #define REG_SERCOM2_USART_DBGCTRL (*(__IO uint8_t*)0x42000C30U) /**< (SERCOM2) USART Debug Control */ #endif /* (defined(__ASSEMBLER__) || defined(__IAR_SYSTEMS_ASM__)) */ /* ========== Instance Parameter definitions for SERCOM2 peripheral ========== */ #define SERCOM2_DMAC_ID_RX 8 /* Index of DMA RX trigger */ #define SERCOM2_DMAC_ID_TX 9 /* Index of DMA TX trigger */ #define SERCOM2_FIFO_DEPTH_POWER 1 /* Rx Fifo depth = 2^FIFO_DEPTH_POWER */ #define SERCOM2_GCLK_ID_CORE 13 #define SERCOM2_GCLK_ID_SLOW 10 #define SERCOM2_INT_MSB 6 #define SERCOM2_PMSB 3 #define SERCOM2_SPI 1 /* SPI mode implemented? */ #define SERCOM2_TWIM 0 /* TWI Master mode implemented? */ #define SERCOM2_TWIS 0 /* TWI Slave mode implemented? */ #define SERCOM2_TWI_HSMODE 0 /* TWI HighSpeed mode implemented? */ #define SERCOM2_USART 1 /* USART mode implemented? */ #define SERCOM2_USART_AUTOBAUD 1 /* USART AUTOBAUD mode implemented? */ #define SERCOM2_USART_ISO7816 1 /* USART ISO7816 mode implemented? */ #define SERCOM2_USART_LIN_MASTER 0 /* USART LIN Master mode implemented? */ #define SERCOM2_USART_RS485 1 /* USART RS485 mode implemented? */ #define SERCOM2_INSTANCE_ID 67 #endif /* _SAML11_SERCOM2_INSTANCE_ */