/* ** ################################################################### ** Version: rev. 1.5, 2015-08-17 ** Build: b180410 ** ** Abstract: ** Chip specific module features. ** ** The Clear BSD License ** Copyright 2016 Freescale Semiconductor, Inc. ** Copyright 2016-2018 NXP ** All rights reserved. ** ** Redistribution and use in source and binary forms, with or without ** modification, are permitted (subject to the limitations in the ** disclaimer below) provided that the following conditions are met: ** ** * Redistributions of source code must retain the above copyright ** notice, this list of conditions and the following disclaimer. ** ** * Redistributions in binary form must reproduce the above copyright ** notice, this list of conditions and the following disclaimer in the ** documentation and/or other materials provided with the distribution. ** ** * Neither the name of the copyright holder nor the names of its ** contributors may be used to endorse or promote products derived from ** this software without specific prior written permission. ** ** NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE ** GRANTED BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT ** HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED ** WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ** MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE ** LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR ** CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF ** SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR ** BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, ** WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE ** OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN ** IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ** ** http: www.nxp.com ** mail: support@nxp.com ** ** Revisions: ** - rev. 1.0 (2015-04-09) ** Initial version ** - rev. 1.1 (2015-05-19) ** FSL_FEATURE_SOC_CAU_COUNT remamed to FSL_FEATURE_SOC_MMCAU_COUNT. ** Added FSL_FEATURE_SOC_peripheral_COUNT for TRNG and HSADC. ** Added features for PDB, PORT and LTC. ** - rev. 1.2 (2015-05-25) ** Added FSL_FEATURE_FLASH_PFLASH_START_ADDRESS ** - rev. 1.3 (2015-05-27) ** Several USB features added. ** - rev. 1.4 (2015-06-08) ** FTM features BUS_CLOCK and FAST_CLOCK removed. ** - rev. 1.5 (2015-08-17) ** LLWU features updated (pinout update). ** ** ################################################################### */ #ifndef _MK82F25615_FEATURES_H_ #define _MK82F25615_FEATURES_H_ /* SOC module features */ /* @brief ADC16 availability on the SoC. */ #define FSL_FEATURE_SOC_ADC16_COUNT (1) /* @brief AIPS availability on the SoC. */ #define FSL_FEATURE_SOC_AIPS_COUNT (2) /* @brief AXBS availability on the SoC. */ #define FSL_FEATURE_SOC_AXBS_COUNT (1) /* @brief MMCAU availability on the SoC. */ #define FSL_FEATURE_SOC_MMCAU_COUNT (1) /* @brief CMP availability on the SoC. */ #define FSL_FEATURE_SOC_CMP_COUNT (2) /* @brief CMT availability on the SoC. */ #define FSL_FEATURE_SOC_CMT_COUNT (1) /* @brief CRC availability on the SoC. */ #define FSL_FEATURE_SOC_CRC_COUNT (1) /* @brief DAC availability on the SoC. */ #define FSL_FEATURE_SOC_DAC_COUNT (1) /* @brief EDMA availability on the SoC. */ #define FSL_FEATURE_SOC_EDMA_COUNT (1) /* @brief DMAMUX availability on the SoC. */ #define FSL_FEATURE_SOC_DMAMUX_COUNT (1) /* @brief DSPI availability on the SoC. */ #define FSL_FEATURE_SOC_DSPI_COUNT (3) /* @brief EMVSIM availability on the SoC. */ #define FSL_FEATURE_SOC_EMVSIM_COUNT (2) /* @brief EWM availability on the SoC. */ #define FSL_FEATURE_SOC_EWM_COUNT (1) /* @brief FB availability on the SoC. */ #define FSL_FEATURE_SOC_FB_COUNT (1) /* @brief FLEXIO availability on the SoC. */ #define FSL_FEATURE_SOC_FLEXIO_COUNT (1) /* @brief FMC availability on the SoC. */ #define FSL_FEATURE_SOC_FMC_COUNT (1) /* @brief FTFA availability on the SoC. */ #define FSL_FEATURE_SOC_FTFA_COUNT (1) /* @brief FTM availability on the SoC. */ #define FSL_FEATURE_SOC_FTM_COUNT (4) /* @brief GPIO availability on the SoC. */ #define FSL_FEATURE_SOC_GPIO_COUNT (5) /* @brief I2C availability on the SoC. */ #define FSL_FEATURE_SOC_I2C_COUNT (4) /* @brief I2S availability on the SoC. */ #define FSL_FEATURE_SOC_I2S_COUNT (1) /* @brief LLWU availability on the SoC. */ #define FSL_FEATURE_SOC_LLWU_COUNT (1) /* @brief LMEM availability on the SoC. */ #define FSL_FEATURE_SOC_LMEM_COUNT (1) /* @brief LPTMR availability on the SoC. */ #define FSL_FEATURE_SOC_LPTMR_COUNT (2) /* @brief LPUART availability on the SoC. */ #define FSL_FEATURE_SOC_LPUART_COUNT (5) /* @brief LTC availability on the SoC. */ #define FSL_FEATURE_SOC_LTC_COUNT (1) /* @brief MCG availability on the SoC. */ #define FSL_FEATURE_SOC_MCG_COUNT (1) /* @brief MCM availability on the SoC. */ #define FSL_FEATURE_SOC_MCM_COUNT (1) /* @brief SYSMPU availability on the SoC. */ #define FSL_FEATURE_SOC_SYSMPU_COUNT (1) /* @brief OSC availability on the SoC. */ #define FSL_FEATURE_SOC_OSC_COUNT (1) /* @brief OTFAD availability on the SoC. */ #define FSL_FEATURE_SOC_OTFAD_COUNT (1) /* @brief PDB availability on the SoC. */ #define FSL_FEATURE_SOC_PDB_COUNT (1) /* @brief PIT availability on the SoC. */ #define FSL_FEATURE_SOC_PIT_COUNT (1) /* @brief PMC availability on the SoC. */ #define FSL_FEATURE_SOC_PMC_COUNT (1) /* @brief PORT availability on the SoC. */ #define FSL_FEATURE_SOC_PORT_COUNT (5) /* @brief QuadSPI availability on the SoC. */ #define FSL_FEATURE_SOC_QuadSPI_COUNT (1) /* @brief RCM availability on the SoC. */ #define FSL_FEATURE_SOC_RCM_COUNT (1) /* @brief RFSYS availability on the SoC. */ #define FSL_FEATURE_SOC_RFSYS_COUNT (1) /* @brief RFVBAT availability on the SoC. */ #define FSL_FEATURE_SOC_RFVBAT_COUNT (1) /* @brief RTC availability on the SoC. */ #define FSL_FEATURE_SOC_RTC_COUNT (1) /* @brief SDHC availability on the SoC. */ #define FSL_FEATURE_SOC_SDHC_COUNT (1) /* @brief SDRAM availability on the SoC. */ #define FSL_FEATURE_SOC_SDRAM_COUNT (1) /* @brief SIM availability on the SoC. */ #define FSL_FEATURE_SOC_SIM_COUNT (1) /* @brief SMC availability on the SoC. */ #define FSL_FEATURE_SOC_SMC_COUNT (1) /* @brief TPM availability on the SoC. */ #define FSL_FEATURE_SOC_TPM_COUNT (2) /* @brief TRNG availability on the SoC. */ #define FSL_FEATURE_SOC_TRNG_COUNT (1) /* @brief TSI availability on the SoC. */ #define FSL_FEATURE_SOC_TSI_COUNT (1) /* @brief USB availability on the SoC. */ #define FSL_FEATURE_SOC_USB_COUNT (1) /* @brief USBDCD availability on the SoC. */ #define FSL_FEATURE_SOC_USBDCD_COUNT (1) /* @brief VREF availability on the SoC. */ #define FSL_FEATURE_SOC_VREF_COUNT (1) /* @brief WDOG availability on the SoC. */ #define FSL_FEATURE_SOC_WDOG_COUNT (1) /* ADC16 module features */ /* @brief Has Programmable Gain Amplifier (PGA) in ADC (register PGA). */ #define FSL_FEATURE_ADC16_HAS_PGA (0) /* @brief Has PGA chopping control in ADC (bit PGA[PGACHPb] or PGA[PGACHP]). */ #define FSL_FEATURE_ADC16_HAS_PGA_CHOPPING (0) /* @brief Has PGA offset measurement mode in ADC (bit PGA[PGAOFSM]). */ #define FSL_FEATURE_ADC16_HAS_PGA_OFFSET_MEASUREMENT (0) /* @brief Has DMA support (bit SC2[DMAEN] or SC4[DMAEN]). */ #define FSL_FEATURE_ADC16_HAS_DMA (1) /* @brief Has differential mode (bitfield SC1x[DIFF]). */ #define FSL_FEATURE_ADC16_HAS_DIFF_MODE (1) /* @brief Has FIFO (bit SC4[AFDEP]). */ #define FSL_FEATURE_ADC16_HAS_FIFO (0) /* @brief FIFO size if available (bitfield SC4[AFDEP]). */ #define FSL_FEATURE_ADC16_FIFO_SIZE (0) /* @brief Has channel set a/b multiplexor (bitfield CFG2[MUXSEL]). */ #define FSL_FEATURE_ADC16_HAS_MUX_SELECT (1) /* @brief Has HW trigger masking (bitfield SC5[HTRGMASKE]. */ #define FSL_FEATURE_ADC16_HAS_HW_TRIGGER_MASK (0) /* @brief Has calibration feature (bit SC3[CAL] and registers CLPx, CLMx). */ #define FSL_FEATURE_ADC16_HAS_CALIBRATION (1) /* @brief Has HW averaging (bit SC3[AVGE]). */ #define FSL_FEATURE_ADC16_HAS_HW_AVERAGE (1) /* @brief Has offset correction (register OFS). */ #define FSL_FEATURE_ADC16_HAS_OFFSET_CORRECTION (1) /* @brief Maximum ADC resolution. */ #define FSL_FEATURE_ADC16_MAX_RESOLUTION (16) /* @brief Number of SC1x and Rx register pairs (conversion control and result registers). */ #define FSL_FEATURE_ADC16_CONVERSION_CONTROL_COUNT (2) /* CMP module features */ /* @brief Has Trigger mode in CMP (register bit field CR1[TRIGM]). */ #define FSL_FEATURE_CMP_HAS_TRIGGER_MODE (1) /* @brief Has Window mode in CMP (register bit field CR1[WE]). */ #define FSL_FEATURE_CMP_HAS_WINDOW_MODE (1) /* @brief Has External sample supported in CMP (register bit field CR1[SE]). */ #define FSL_FEATURE_CMP_HAS_EXTERNAL_SAMPLE_SUPPORT (1) /* @brief Has DMA support in CMP (register bit field SCR[DMAEN]). */ #define FSL_FEATURE_CMP_HAS_DMA (1) /* @brief Has Pass Through mode in CMP (register bit field MUXCR[PSTM]). */ #define FSL_FEATURE_CMP_HAS_PASS_THROUGH_MODE (0) /* @brief Has DAC Test function in CMP (register DACTEST). */ #define FSL_FEATURE_CMP_HAS_DAC_TEST (0) /* CRC module features */ /* @brief Has data register with name CRC */ #define FSL_FEATURE_CRC_HAS_CRC_REG (0) /* DAC module features */ /* @brief Define the size of hardware buffer */ #define FSL_FEATURE_DAC_BUFFER_SIZE (16) /* @brief Define whether the buffer supports watermark event detection or not. */ #define FSL_FEATURE_DAC_HAS_WATERMARK_DETECTION (1) /* @brief Define whether the buffer supports watermark selection detection or not. */ #define FSL_FEATURE_DAC_HAS_WATERMARK_SELECTION (1) /* @brief Define whether the buffer supports watermark event 1 word before buffer upper limit. */ #define FSL_FEATURE_DAC_HAS_WATERMARK_1_WORD (1) /* @brief Define whether the buffer supports watermark event 2 words before buffer upper limit. */ #define FSL_FEATURE_DAC_HAS_WATERMARK_2_WORDS (1) /* @brief Define whether the buffer supports watermark event 3 words before buffer upper limit. */ #define FSL_FEATURE_DAC_HAS_WATERMARK_3_WORDS (1) /* @brief Define whether the buffer supports watermark event 4 words before buffer upper limit. */ #define FSL_FEATURE_DAC_HAS_WATERMARK_4_WORDS (1) /* @brief Define whether FIFO buffer mode is available or not. */ #define FSL_FEATURE_DAC_HAS_BUFFER_FIFO_MODE (1) /* @brief Define whether swing buffer mode is available or not.. */ #define FSL_FEATURE_DAC_HAS_BUFFER_SWING_MODE (1) /* EDMA module features */ /* @brief Number of DMA channels (related to number of registers TCD, DCHPRI, bit fields ERQ[ERQn], EEI[EEIn], INT[INTn], ERR[ERRn], HRS[HRSn] and bit field widths ES[ERRCHN], CEEI[CEEI], SEEI[SEEI], CERQ[CERQ], SERQ[SERQ], CDNE[CDNE], SSRT[SSRT], CERR[CERR], CINT[CINT], TCDn_CITER_ELINKYES[LINKCH], TCDn_CSR[MAJORLINKCH], TCDn_BITER_ELINKYES[LINKCH]). (Valid only for eDMA modules.) */ #define FSL_FEATURE_EDMA_MODULE_CHANNEL (32) /* @brief Total number of DMA channels on all modules. */ #define FSL_FEATURE_EDMA_DMAMUX_CHANNELS (FSL_FEATURE_SOC_EDMA_COUNT * 32) /* @brief Number of DMA channel groups (register bit fields CR[ERGA], CR[GRPnPRI], ES[GPE], DCHPRIn[GRPPRI]). (Valid only for eDMA modules.) */ #define FSL_FEATURE_EDMA_CHANNEL_GROUP_COUNT (2) /* @brief Has DMA_Error interrupt vector. */ #define FSL_FEATURE_EDMA_HAS_ERROR_IRQ (1) /* @brief Number of DMA channels with asynchronous request capability (register EARS). (Valid only for eDMA modules.) */ #define FSL_FEATURE_EDMA_ASYNCHRO_REQUEST_CHANNEL_COUNT (32) /* DMAMUX module features */ /* @brief Number of DMA channels (related to number of register CHCFGn). */ #define FSL_FEATURE_DMAMUX_MODULE_CHANNEL (32) /* @brief Total number of DMA channels on all modules. */ #define FSL_FEATURE_DMAMUX_DMAMUX_CHANNELS (FSL_FEATURE_SOC_DMAMUX_COUNT * 32) /* @brief Has the periodic trigger capability for the triggered DMA channel (register bit CHCFG0[TRIG]). */ #define FSL_FEATURE_DMAMUX_HAS_TRIG (1) /* EWM module features */ /* @brief Has clock select (register CLKCTRL). */ #define FSL_FEATURE_EWM_HAS_CLOCK_SELECT (1) /* @brief Has clock prescaler (register CLKPRESCALER). */ #define FSL_FEATURE_EWM_HAS_PRESCALER (1) /* FLEXBUS module features */ /* No feature definitions */ /* FLEXIO module features */ /* @brief Has Shifter Status Register (FLEXIO_SHIFTSTAT) */ #define FSL_FEATURE_FLEXIO_HAS_SHIFTER_STATUS (1) /* @brief Has Pin Data Input Register (FLEXIO_PIN) */ #define FSL_FEATURE_FLEXIO_HAS_PIN_STATUS (1) /* @brief Has Shifter Buffer N Nibble Byte Swapped Register (FLEXIO_SHIFTBUFNBSn) */ #define FSL_FEATURE_FLEXIO_HAS_SHFT_BUFFER_NIBBLE_BYTE_SWAP (1) /* @brief Has Shifter Buffer N Half Word Swapped Register (FLEXIO_SHIFTBUFHWSn) */ #define FSL_FEATURE_FLEXIO_HAS_SHFT_BUFFER_HALF_WORD_SWAP (1) /* @brief Has Shifter Buffer N Nibble Swapped Register (FLEXIO_SHIFTBUFNISn) */ #define FSL_FEATURE_FLEXIO_HAS_SHFT_BUFFER_NIBBLE_SWAP (1) /* @brief Supports Shifter State Mode (FLEXIO_SHIFTCTLn[SMOD]) */ #define FSL_FEATURE_FLEXIO_HAS_STATE_MODE (1) /* @brief Supports Shifter Logic Mode (FLEXIO_SHIFTCTLn[SMOD]) */ #define FSL_FEATURE_FLEXIO_HAS_LOGIC_MODE (1) /* @brief Supports paralle width (FLEXIO_SHIFTCFGn[PWIDTH]) */ #define FSL_FEATURE_FLEXIO_HAS_PARALLEL_WIDTH (1) /* @brief Reset value of the FLEXIO_VERID register */ #define FSL_FEATURE_FLEXIO_VERID_RESET_VALUE (0x1010001) /* @brief Reset value of the FLEXIO_PARAM register */ #define FSL_FEATURE_FLEXIO_PARAM_RESET_VALUE (0x10200808) /* @brief Flexio DMA request base channel */ #define FSL_FEATURE_FLEXIO_DMA_REQUEST_BASE_CHANNEL (16) /* FLASH module features */ /* @brief Is of type FTFA. */ #define FSL_FEATURE_FLASH_IS_FTFA (1) /* @brief Is of type FTFE. */ #define FSL_FEATURE_FLASH_IS_FTFE (0) /* @brief Is of type FTFL. */ #define FSL_FEATURE_FLASH_IS_FTFL (0) /* @brief Has flags indicating the status of the FlexRAM (register bits FCNFG[EEERDY], FCNFG[RAMRDY] and FCNFG[PFLSH]). */ #define FSL_FEATURE_FLASH_HAS_FLEX_RAM_FLAGS (0) /* @brief Has program flash swapping status flag (register bit FCNFG[SWAP]). */ #define FSL_FEATURE_FLASH_HAS_PFLASH_SWAPPING_STATUS_FLAG (0) /* @brief Has EEPROM region protection (register FEPROT). */ #define FSL_FEATURE_FLASH_HAS_EEROM_REGION_PROTECTION (0) /* @brief Has data flash region protection (register FDPROT). */ #define FSL_FEATURE_FLASH_HAS_DATA_FLASH_REGION_PROTECTION (0) /* @brief Has flash access control (registers XACCHn, SACCHn, where n is a number, FACSS and FACSN). */ #define FSL_FEATURE_FLASH_HAS_ACCESS_CONTROL (1) /* @brief Has flash cache control in FMC module. */ #define FSL_FEATURE_FLASH_HAS_FMC_FLASH_CACHE_CONTROLS (1) /* @brief Has flash cache control in MCM module. */ #define FSL_FEATURE_FLASH_HAS_MCM_FLASH_CACHE_CONTROLS (0) /* @brief Has flash cache control in MSCM module. */ #define FSL_FEATURE_FLASH_HAS_MSCM_FLASH_CACHE_CONTROLS (0) /* @brief Has prefetch speculation control in flash, such as kv5x. */ #define FSL_FEATURE_FLASH_PREFETCH_SPECULATION_CONTROL_IN_FLASH (0) /* @brief P-Flash flash size coding rule version, value 0 for K1 and K2, value 1 for K3. */ #define FSL_FEATURE_FLASH_SIZE_ENCODING_RULE_VERSION (0) /* @brief P-Flash start address. */ #define FSL_FEATURE_FLASH_PFLASH_START_ADDRESS (0x00000000) /* @brief P-Flash block count. */ #define FSL_FEATURE_FLASH_PFLASH_BLOCK_COUNT (1) /* @brief P-Flash block size. */ #define FSL_FEATURE_FLASH_PFLASH_BLOCK_SIZE (262144) /* @brief P-Flash sector size. */ #define FSL_FEATURE_FLASH_PFLASH_BLOCK_SECTOR_SIZE (4096) /* @brief P-Flash write unit size. */ #define FSL_FEATURE_FLASH_PFLASH_BLOCK_WRITE_UNIT_SIZE (4) /* @brief P-Flash data path width. */ #define FSL_FEATURE_FLASH_PFLASH_BLOCK_DATA_PATH_WIDTH (16) /* @brief P-Flash block swap feature. */ #define FSL_FEATURE_FLASH_HAS_PFLASH_BLOCK_SWAP (0) /* @brief P-Flash protection region count. */ #define FSL_FEATURE_FLASH_PFLASH_PROTECTION_REGION_COUNT (32) /* @brief Has FlexNVM memory. */ #define FSL_FEATURE_FLASH_HAS_FLEX_NVM (0) /* @brief FlexNVM start address. (Valid only if FlexNVM is available.) */ #define FSL_FEATURE_FLASH_FLEX_NVM_START_ADDRESS (0x00000000) /* @brief FlexNVM block count. */ #define FSL_FEATURE_FLASH_FLEX_NVM_BLOCK_COUNT (0) /* @brief FlexNVM block size. */ #define FSL_FEATURE_FLASH_FLEX_NVM_BLOCK_SIZE (0) /* @brief FlexNVM sector size. */ #define FSL_FEATURE_FLASH_FLEX_NVM_BLOCK_SECTOR_SIZE (0) /* @brief FlexNVM write unit size. */ #define FSL_FEATURE_FLASH_FLEX_NVM_BLOCK_WRITE_UNIT_SIZE (0) /* @brief FlexNVM data path width. */ #define FSL_FEATURE_FLASH_FLEX_BLOCK_DATA_PATH_WIDTH (0) /* @brief Has FlexRAM memory. */ #define FSL_FEATURE_FLASH_HAS_FLEX_RAM (0) /* @brief FlexRAM start address. (Valid only if FlexRAM is available.) */ #define FSL_FEATURE_FLASH_FLEX_RAM_START_ADDRESS (0x00000000) /* @brief FlexRAM size. */ #define FSL_FEATURE_FLASH_FLEX_RAM_SIZE (0) /* @brief Has 0x00 Read 1s Block command. */ #define FSL_FEATURE_FLASH_HAS_READ_1S_BLOCK_CMD (0) /* @brief Has 0x01 Read 1s Section command. */ #define FSL_FEATURE_FLASH_HAS_READ_1S_SECTION_CMD (1) /* @brief Has 0x02 Program Check command. */ #define FSL_FEATURE_FLASH_HAS_PROGRAM_CHECK_CMD (1) /* @brief Has 0x03 Read Resource command. */ #define FSL_FEATURE_FLASH_HAS_READ_RESOURCE_CMD (1) /* @brief Has 0x06 Program Longword command. */ #define FSL_FEATURE_FLASH_HAS_PROGRAM_LONGWORD_CMD (1) /* @brief Has 0x07 Program Phrase command. */ #define FSL_FEATURE_FLASH_HAS_PROGRAM_PHRASE_CMD (0) /* @brief Has 0x08 Erase Flash Block command. */ #define FSL_FEATURE_FLASH_HAS_ERASE_FLASH_BLOCK_CMD (0) /* @brief Has 0x09 Erase Flash Sector command. */ #define FSL_FEATURE_FLASH_HAS_ERASE_FLASH_SECTOR_CMD (1) /* @brief Has 0x0B Program Section command. */ #define FSL_FEATURE_FLASH_HAS_PROGRAM_SECTION_CMD (0) /* @brief Has 0x40 Read 1s All Blocks command. */ #define FSL_FEATURE_FLASH_HAS_READ_1S_ALL_BLOCKS_CMD (1) /* @brief Has 0x41 Read Once command. */ #define FSL_FEATURE_FLASH_HAS_READ_ONCE_CMD (1) /* @brief Has 0x43 Program Once command. */ #define FSL_FEATURE_FLASH_HAS_PROGRAM_ONCE_CMD (1) /* @brief Has 0x44 Erase All Blocks command. */ #define FSL_FEATURE_FLASH_HAS_ERASE_ALL_BLOCKS_CMD (1) /* @brief Has 0x45 Verify Backdoor Access Key command. */ #define FSL_FEATURE_FLASH_HAS_VERIFY_BACKDOOR_ACCESS_KEY_CMD (1) /* @brief Has 0x46 Swap Control command. */ #define FSL_FEATURE_FLASH_HAS_SWAP_CONTROL_CMD (0) /* @brief Has 0x49 Erase All Blocks Unsecure command. */ #define FSL_FEATURE_FLASH_HAS_ERASE_ALL_BLOCKS_UNSECURE_CMD (1) /* @brief Has 0x4A Read 1s All Execute-only Segments command. */ #define FSL_FEATURE_FLASH_HAS_READ_1S_ALL_EXECUTE_ONLY_SEGMENTS_CMD (0) /* @brief Has 0x4B Erase All Execute-only Segments command. */ #define FSL_FEATURE_FLASH_HAS_ERASE_ALL_EXECUTE_ONLY_SEGMENTS_CMD (0) /* @brief Has 0x80 Program Partition command. */ #define FSL_FEATURE_FLASH_HAS_PROGRAM_PARTITION_CMD (0) /* @brief Has 0x81 Set FlexRAM Function command. */ #define FSL_FEATURE_FLASH_HAS_SET_FLEXRAM_FUNCTION_CMD (0) /* @brief P-Flash Erase/Read 1st all block command address alignment. */ #define FSL_FEATURE_FLASH_PFLASH_BLOCK_CMD_ADDRESS_ALIGMENT (16) /* @brief P-Flash Erase sector command address alignment. */ #define FSL_FEATURE_FLASH_PFLASH_SECTOR_CMD_ADDRESS_ALIGMENT (16) /* @brief P-Flash Rrogram/Verify section command address alignment. */ #define FSL_FEATURE_FLASH_PFLASH_SECTION_CMD_ADDRESS_ALIGMENT (16) /* @brief P-Flash Read resource command address alignment. */ #define FSL_FEATURE_FLASH_PFLASH_RESOURCE_CMD_ADDRESS_ALIGMENT (4) /* @brief P-Flash Program check command address alignment. */ #define FSL_FEATURE_FLASH_PFLASH_CHECK_CMD_ADDRESS_ALIGMENT (4) /* @brief P-Flash Program check command address alignment. */ #define FSL_FEATURE_FLASH_PFLASH_SWAP_CONTROL_CMD_ADDRESS_ALIGMENT (0) /* @brief FlexNVM Erase/Read 1st all block command address alignment. */ #define FSL_FEATURE_FLASH_FLEX_NVM_BLOCK_CMD_ADDRESS_ALIGMENT (0) /* @brief FlexNVM Erase sector command address alignment. */ #define FSL_FEATURE_FLASH_FLEX_NVM_SECTOR_CMD_ADDRESS_ALIGMENT (0) /* @brief FlexNVM Rrogram/Verify section command address alignment. */ #define FSL_FEATURE_FLASH_FLEX_NVM_SECTION_CMD_ADDRESS_ALIGMENT (0) /* @brief FlexNVM Read resource command address alignment. */ #define FSL_FEATURE_FLASH_FLEX_NVM_RESOURCE_CMD_ADDRESS_ALIGMENT (0) /* @brief FlexNVM Program check command address alignment. */ #define FSL_FEATURE_FLASH_FLEX_NVM_CHECK_CMD_ADDRESS_ALIGMENT (0) /* @brief FlexNVM partition code 0000 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_0000 (0xFFFFFFFF) /* @brief FlexNVM partition code 0001 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_0001 (0xFFFFFFFF) /* @brief FlexNVM partition code 0010 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_0010 (0xFFFFFFFF) /* @brief FlexNVM partition code 0011 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_0011 (0xFFFFFFFF) /* @brief FlexNVM partition code 0100 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_0100 (0xFFFFFFFF) /* @brief FlexNVM partition code 0101 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_0101 (0xFFFFFFFF) /* @brief FlexNVM partition code 0110 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_0110 (0xFFFFFFFF) /* @brief FlexNVM partition code 0111 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_0111 (0xFFFFFFFF) /* @brief FlexNVM partition code 1000 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_1000 (0xFFFFFFFF) /* @brief FlexNVM partition code 1001 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_1001 (0xFFFFFFFF) /* @brief FlexNVM partition code 1010 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_1010 (0xFFFFFFFF) /* @brief FlexNVM partition code 1011 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_1011 (0xFFFFFFFF) /* @brief FlexNVM partition code 1100 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_1100 (0xFFFFFFFF) /* @brief FlexNVM partition code 1101 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_1101 (0xFFFFFFFF) /* @brief FlexNVM partition code 1110 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_1110 (0xFFFFFFFF) /* @brief FlexNVM partition code 1111 mapping to data flash size in bytes (0xFFFFFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_DFLASH_SIZE_FOR_DEPART_1111 (0xFFFFFFFF) /* @brief Emulated eeprom size code 0000 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_0000 (0xFFFF) /* @brief Emulated eeprom size code 0001 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_0001 (0xFFFF) /* @brief Emulated eeprom size code 0010 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_0010 (0xFFFF) /* @brief Emulated eeprom size code 0011 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_0011 (0xFFFF) /* @brief Emulated eeprom size code 0100 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_0100 (0xFFFF) /* @brief Emulated eeprom size code 0101 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_0101 (0xFFFF) /* @brief Emulated eeprom size code 0110 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_0110 (0xFFFF) /* @brief Emulated eeprom size code 0111 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_0111 (0xFFFF) /* @brief Emulated eeprom size code 1000 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_1000 (0xFFFF) /* @brief Emulated eeprom size code 1001 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_1001 (0xFFFF) /* @brief Emulated eeprom size code 1010 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_1010 (0xFFFF) /* @brief Emulated eeprom size code 1011 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_1011 (0xFFFF) /* @brief Emulated eeprom size code 1100 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_1100 (0xFFFF) /* @brief Emulated eeprom size code 1101 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_1101 (0xFFFF) /* @brief Emulated eeprom size code 1110 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_1110 (0xFFFF) /* @brief Emulated eeprom size code 1111 mapping to emulated eeprom size in bytes (0xFFFF = reserved). */ #define FSL_FEATURE_FLASH_FLEX_NVM_EEPROM_SIZE_FOR_EEESIZE_1111 (0xFFFF) /* FTM module features */ /* @brief Number of channels. */ #define FSL_FEATURE_FTM_CHANNEL_COUNTn(x) \ ((x) == FTM0 ? (8) : \ ((x) == FTM1 ? (2) : \ ((x) == FTM2 ? (2) : \ ((x) == FTM3 ? (8) : (-1))))) /* @brief Has counter reset by the selected input capture event (register bits C0SC[ICRST], C1SC[ICRST], ...). */ #define FSL_FEATURE_FTM_HAS_COUNTER_RESET_BY_CAPTURE_EVENT (1) /* @brief Has extended deadtime value. */ #define FSL_FEATURE_FTM_HAS_EXTENDED_DEADTIME_VALUE (0) /* @brief Enable pwm output for the module. */ #define FSL_FEATURE_FTM_HAS_ENABLE_PWM_OUTPUT (0) /* @brief Has half-cycle reload for the module. */ #define FSL_FEATURE_FTM_HAS_HALFCYCLE_RELOAD (0) /* @brief Has reload interrupt. */ #define FSL_FEATURE_FTM_HAS_RELOAD_INTERRUPT (0) /* @brief Has reload initialization trigger. */ #define FSL_FEATURE_FTM_HAS_RELOAD_INITIALIZATION_TRIGGER (0) /* @brief Has DMA support, bitfield CnSC[DMA]. */ #define FSL_FEATURE_FTM_HAS_DMA_SUPPORT (1) /* @brief Has no QDCTRL. */ #define FSL_FEATURE_FTM_HAS_NO_QDCTRL (0) /* GPIO module features */ /* @brief Has fast (single cycle) access capability via a dedicated memory region. */ #define FSL_FEATURE_GPIO_HAS_FAST_GPIO (0) /* @brief Has port input disable register (PIDR). */ #define FSL_FEATURE_GPIO_HAS_INPUT_DISABLE (0) /* @brief Has dedicated interrupt vector. */ #define FSL_FEATURE_GPIO_HAS_PORT_INTERRUPT_VECTOR (1) /* I2C module features */ /* @brief Has System Management Bus support (registers SMB, A2, SLTL and SLTH). */ #define FSL_FEATURE_I2C_HAS_SMBUS (1) /* @brief Maximum supported baud rate in kilobit per second. */ #define FSL_FEATURE_I2C_MAX_BAUD_KBPS (400) /* @brief Is affected by errata with ID 6070 (repeat start cannot be generated if the F[MULT] bit field is set to a non-zero value). */ #define FSL_FEATURE_I2C_HAS_ERRATA_6070 (0) /* @brief Has DMA support (register bit C1[DMAEN]). */ #define FSL_FEATURE_I2C_HAS_DMA_SUPPORT (1) /* @brief Has I2C bus start and stop detection (register bits FLT[SSIE], FLT[STARTF] and FLT[STOPF]). */ #define FSL_FEATURE_I2C_HAS_START_STOP_DETECT (1) /* @brief Has I2C bus stop detection (register bits FLT[STOPIE] and FLT[STOPF]). */ #define FSL_FEATURE_I2C_HAS_STOP_DETECT (0) /* @brief Has I2C bus stop hold off (register bit FLT[SHEN]). */ #define FSL_FEATURE_I2C_HAS_STOP_HOLD_OFF (1) /* @brief Maximum width of the glitch filter in number of bus clocks. */ #define FSL_FEATURE_I2C_MAX_GLITCH_FILTER_WIDTH (15) /* @brief Has control of the drive capability of the I2C pins. */ #define FSL_FEATURE_I2C_HAS_HIGH_DRIVE_SELECTION (1) /* @brief Has double buffering support (register S2). */ #define FSL_FEATURE_I2C_HAS_DOUBLE_BUFFERING (1) /* @brief Has double buffer enable. */ #define FSL_FEATURE_I2C_HAS_DOUBLE_BUFFER_ENABLE (0) /* SAI module features */ /* @brief Receive/transmit FIFO size in item count (register bit fields TCSR[FRDE], TCSR[FRIE], TCSR[FRF], TCR1[TFW], RCSR[FRDE], RCSR[FRIE], RCSR[FRF], RCR1[RFW], registers TFRn, RFRn). */ #define FSL_FEATURE_SAI_FIFO_COUNT (8) /* @brief Receive/transmit channel number (register bit fields TCR3[TCE], RCR3[RCE], registers TDRn and RDRn). */ #define FSL_FEATURE_SAI_CHANNEL_COUNT (2) /* @brief Maximum words per frame (register bit fields TCR3[WDFL], TCR4[FRSZ], TMR[TWM], RCR3[WDFL], RCR4[FRSZ], RMR[RWM]). */ #define FSL_FEATURE_SAI_MAX_WORDS_PER_FRAME (32) /* @brief Has support of combining multiple data channel FIFOs into single channel FIFO (register bit fields TCR3[CFR], TCR4[FCOMB], TFR0[WCP], TFR1[WCP], RCR3[CFR], RCR4[FCOMB], RFR0[RCP], RFR1[RCP]). */ #define FSL_FEATURE_SAI_HAS_FIFO_COMBINE_MODE (1) /* @brief Has packing of 8-bit and 16-bit data into each 32-bit FIFO word (register bit fields TCR4[FPACK], RCR4[FPACK]). */ #define FSL_FEATURE_SAI_HAS_FIFO_PACKING (1) /* @brief Configures when the SAI will continue transmitting after a FIFO error has been detected (register bit fields TCR4[FCONT], RCR4[FCONT]). */ #define FSL_FEATURE_SAI_HAS_FIFO_FUNCTION_AFTER_ERROR (1) /* @brief Configures if the frame sync is generated internally, a frame sync is only generated when the FIFO warning flag is clear or continuously (register bit fields TCR4[ONDEM], RCR4[ONDEM]). */ #define FSL_FEATURE_SAI_HAS_ON_DEMAND_MODE (1) /* @brief Simplified bit clock source and asynchronous/synchronous mode selection (register bit fields TCR2[CLKMODE], RCR2[CLKMODE]), in comparison with the exclusively implemented TCR2[SYNC,BCS,BCI,MSEL], RCR2[SYNC,BCS,BCI,MSEL]. */ #define FSL_FEATURE_SAI_HAS_CLOCKING_MODE (0) /* @brief Has register for configuration of the MCLK divide ratio (register bit fields MDR[FRACT], MDR[DIVIDE]). */ #define FSL_FEATURE_SAI_HAS_MCLKDIV_REGISTER (1) /* @brief Ihe interrupt source number */ #define FSL_FEATURE_SAI_INT_SOURCE_NUM (2) /* @brief Has register of MCR. */ #define FSL_FEATURE_SAI_HAS_MCR (1) /* @brief Has register of MDR */ #define FSL_FEATURE_SAI_HAS_MDR (1) /* LLWU module features */ #if defined(CPU_MK82FN256CAx15) || defined(CPU_MK82FN256VDC15) /* @brief Maximum number of pins (maximal index plus one) connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN (26) /* @brief Has pins 8-15 connected to LLWU device. */ #define FSL_FEATURE_LLWU_EXTERNAL_PIN_GROUP2 (1) /* @brief Maximum number of internal modules connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE (8) /* @brief Number of digital filters. */ #define FSL_FEATURE_LLWU_HAS_PIN_FILTER (4) /* @brief Has MF register. */ #define FSL_FEATURE_LLWU_HAS_MF (1) /* @brief Has PF register. */ #define FSL_FEATURE_LLWU_HAS_PF (1) /* @brief Has possibility to enable reset in low leakage power mode and enable digital filter for RESET pin (register LLWU_RST). */ #define FSL_FEATURE_LLWU_HAS_RESET_ENABLE (0) /* @brief Has no internal module wakeup flag register. */ #define FSL_FEATURE_LLWU_HAS_NO_INTERNAL_MODULE_WAKEUP_FLAG_REG (0) /* @brief Has external pin 0 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN0 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN0_GPIO_IDX (GPIOE_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN0_GPIO_PIN (1) /* @brief Has external pin 1 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN1 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN1_GPIO_IDX (GPIOE_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN1_GPIO_PIN (2) /* @brief Has external pin 2 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN2 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN2_GPIO_IDX (GPIOE_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN2_GPIO_PIN (4) /* @brief Has external pin 3 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN3 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN3_GPIO_IDX (GPIOA_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN3_GPIO_PIN (4) /* @brief Has external pin 4 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN4 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN4_GPIO_IDX (GPIOA_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN4_GPIO_PIN (13) /* @brief Has external pin 5 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN5 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN5_GPIO_IDX (GPIOB_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN5_GPIO_PIN (0) /* @brief Has external pin 6 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN6 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN6_GPIO_IDX (GPIOC_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN6_GPIO_PIN (1) /* @brief Has external pin 7 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN7 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN7_GPIO_IDX (GPIOC_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN7_GPIO_PIN (3) /* @brief Has external pin 8 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN8 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN8_GPIO_IDX (GPIOC_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN8_GPIO_PIN (4) /* @brief Has external pin 9 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN9 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN9_GPIO_IDX (GPIOC_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN9_GPIO_PIN (5) /* @brief Has external pin 10 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN10 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN10_GPIO_IDX (GPIOC_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN10_GPIO_PIN (6) /* @brief Has external pin 11 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN11 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN11_GPIO_IDX (GPIOC_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN11_GPIO_PIN (11) /* @brief Has external pin 12 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN12 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN12_GPIO_IDX (GPIOD_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN12_GPIO_PIN (0) /* @brief Has external pin 13 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN13 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN13_GPIO_IDX (GPIOD_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN13_GPIO_PIN (2) /* @brief Has external pin 14 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN14 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN14_GPIO_IDX (GPIOD_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN14_GPIO_PIN (4) /* @brief Has external pin 15 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN15 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN15_GPIO_IDX (GPIOD_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN15_GPIO_PIN (6) /* @brief Has external pin 16 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN16 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN16_GPIO_IDX (GPIOE_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN16_GPIO_PIN (6) /* @brief Has external pin 17 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN17 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN17_GPIO_IDX (GPIOE_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN17_GPIO_PIN (9) /* @brief Has external pin 18 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN18 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN18_GPIO_IDX (GPIOE_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN18_GPIO_PIN (10) /* @brief Has external pin 19 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN19 (0) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN19_GPIO_IDX (0) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN19_GPIO_PIN (0) /* @brief Has external pin 20 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN20 (0) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN20_GPIO_IDX (0) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN20_GPIO_PIN (0) /* @brief Has external pin 21 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN21 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN21_GPIO_IDX (GPIOA_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN21_GPIO_PIN (21) /* @brief Has external pin 22 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN22 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN22_GPIO_IDX (GPIOA_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN22_GPIO_PIN (10) /* @brief Has external pin 23 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN23 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN23_GPIO_IDX (GPIOA_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN23_GPIO_PIN (11) /* @brief Has external pin 24 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN24 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN24_GPIO_IDX (GPIOD_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN24_GPIO_PIN (8) /* @brief Has external pin 25 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN25 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN25_GPIO_IDX (GPIOD_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN25_GPIO_PIN (11) /* @brief Has external pin 26 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN26 (0) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN26_GPIO_IDX (0) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN26_GPIO_PIN (0) /* @brief Has external pin 27 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN27 (0) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN27_GPIO_IDX (0) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN27_GPIO_PIN (0) /* @brief Has external pin 28 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN28 (0) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN28_GPIO_IDX (0) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN28_GPIO_PIN (0) /* @brief Has external pin 29 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN29 (0) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN29_GPIO_IDX (0) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN29_GPIO_PIN (0) /* @brief Has external pin 30 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN30 (0) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN30_GPIO_IDX (0) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN30_GPIO_PIN (0) /* @brief Has external pin 31 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN31 (0) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN31_GPIO_IDX (0) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN31_GPIO_PIN (0) /* @brief Has internal module 0 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE0 (1) /* @brief Has internal module 1 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE1 (1) /* @brief Has internal module 2 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE2 (1) /* @brief Has internal module 3 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE3 (0) /* @brief Has internal module 4 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE4 (1) /* @brief Has internal module 5 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE5 (1) /* @brief Has internal module 6 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE6 (0) /* @brief Has internal module 7 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE7 (1) /* @brief Has Version ID Register (LLWU_VERID). */ #define FSL_FEATURE_LLWU_HAS_VERID (0) /* @brief Has Parameter Register (LLWU_PARAM). */ #define FSL_FEATURE_LLWU_HAS_PARAM (0) /* @brief Width of registers of the LLWU. */ #define FSL_FEATURE_LLWU_REG_BITWIDTH (8) /* @brief Has DMA Enable register (LLWU_DE). */ #define FSL_FEATURE_LLWU_HAS_DMA_ENABLE_REG (0) #elif defined(CPU_MK82FN256VLL15) /* @brief Maximum number of pins (maximal index plus one) connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN (19) /* @brief Has pins 8-15 connected to LLWU device. */ #define FSL_FEATURE_LLWU_EXTERNAL_PIN_GROUP2 (1) /* @brief Maximum number of internal modules connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE (8) /* @brief Number of digital filters. */ #define FSL_FEATURE_LLWU_HAS_PIN_FILTER (4) /* @brief Has MF register. */ #define FSL_FEATURE_LLWU_HAS_MF (1) /* @brief Has PF register. */ #define FSL_FEATURE_LLWU_HAS_PF (1) /* @brief Has possibility to enable reset in low leakage power mode and enable digital filter for RESET pin (register LLWU_RST). */ #define FSL_FEATURE_LLWU_HAS_RESET_ENABLE (0) /* @brief Has no internal module wakeup flag register. */ #define FSL_FEATURE_LLWU_HAS_NO_INTERNAL_MODULE_WAKEUP_FLAG_REG (0) /* @brief Has external pin 0 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN0 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN0_GPIO_IDX (GPIOE_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN0_GPIO_PIN (1) /* @brief Has external pin 1 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN1 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN1_GPIO_IDX (GPIOE_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN1_GPIO_PIN (2) /* @brief Has external pin 2 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN2 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN2_GPIO_IDX (GPIOE_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN2_GPIO_PIN (4) /* @brief Has external pin 3 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN3 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN3_GPIO_IDX (GPIOA_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN3_GPIO_PIN (4) /* @brief Has external pin 4 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN4 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN4_GPIO_IDX (GPIOA_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN4_GPIO_PIN (13) /* @brief Has external pin 5 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN5 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN5_GPIO_IDX (GPIOB_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN5_GPIO_PIN (0) /* @brief Has external pin 6 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN6 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN6_GPIO_IDX (GPIOC_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN6_GPIO_PIN (1) /* @brief Has external pin 7 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN7 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN7_GPIO_IDX (GPIOC_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN7_GPIO_PIN (3) /* @brief Has external pin 8 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN8 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN8_GPIO_IDX (GPIOC_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN8_GPIO_PIN (4) /* @brief Has external pin 9 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN9 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN9_GPIO_IDX (GPIOC_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN9_GPIO_PIN (5) /* @brief Has external pin 10 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN10 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN10_GPIO_IDX (GPIOC_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN10_GPIO_PIN (6) /* @brief Has external pin 11 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN11 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN11_GPIO_IDX (GPIOC_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN11_GPIO_PIN (11) /* @brief Has external pin 12 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN12 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN12_GPIO_IDX (GPIOD_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN12_GPIO_PIN (0) /* @brief Has external pin 13 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN13 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN13_GPIO_IDX (GPIOD_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN13_GPIO_PIN (2) /* @brief Has external pin 14 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN14 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN14_GPIO_IDX (GPIOD_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN14_GPIO_PIN (4) /* @brief Has external pin 15 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN15 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN15_GPIO_IDX (GPIOD_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN15_GPIO_PIN (6) /* @brief Has external pin 16 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN16 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN16_GPIO_IDX (GPIOE_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN16_GPIO_PIN (6) /* @brief Has external pin 17 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN17 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN17_GPIO_IDX (GPIOE_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN17_GPIO_PIN (9) /* @brief Has external pin 18 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN18 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN18_GPIO_IDX (GPIOE_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN18_GPIO_PIN (10) /* @brief Has external pin 19 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN19 (0) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN19_GPIO_IDX (0) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN19_GPIO_PIN (0) /* @brief Has external pin 20 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN20 (0) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN20_GPIO_IDX (0) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN20_GPIO_PIN (0) /* @brief Has external pin 21 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN21 (0) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN21_GPIO_IDX (0) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN21_GPIO_PIN (0) /* @brief Has external pin 22 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN22 (0) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN22_GPIO_IDX (0) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN22_GPIO_PIN (0) /* @brief Has external pin 23 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN23 (0) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN23_GPIO_IDX (0) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN23_GPIO_PIN (0) /* @brief Has external pin 24 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN24 (0) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN24_GPIO_IDX (0) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN24_GPIO_PIN (0) /* @brief Has external pin 25 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN25 (0) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN25_GPIO_IDX (0) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN25_GPIO_PIN (0) /* @brief Has external pin 26 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN26 (0) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN26_GPIO_IDX (0) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN26_GPIO_PIN (0) /* @brief Has external pin 27 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN27 (0) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN27_GPIO_IDX (0) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN27_GPIO_PIN (0) /* @brief Has external pin 28 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN28 (0) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN28_GPIO_IDX (0) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN28_GPIO_PIN (0) /* @brief Has external pin 29 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN29 (0) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN29_GPIO_IDX (0) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN29_GPIO_PIN (0) /* @brief Has external pin 30 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN30 (0) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN30_GPIO_IDX (0) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN30_GPIO_PIN (0) /* @brief Has external pin 31 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN31 (0) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN31_GPIO_IDX (0) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN31_GPIO_PIN (0) /* @brief Has internal module 0 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE0 (1) /* @brief Has internal module 1 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE1 (1) /* @brief Has internal module 2 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE2 (1) /* @brief Has internal module 3 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE3 (0) /* @brief Has internal module 4 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE4 (1) /* @brief Has internal module 5 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE5 (1) /* @brief Has internal module 6 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE6 (0) /* @brief Has internal module 7 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE7 (1) /* @brief Has Version ID Register (LLWU_VERID). */ #define FSL_FEATURE_LLWU_HAS_VERID (0) /* @brief Has Parameter Register (LLWU_PARAM). */ #define FSL_FEATURE_LLWU_HAS_PARAM (0) /* @brief Width of registers of the LLWU. */ #define FSL_FEATURE_LLWU_REG_BITWIDTH (8) /* @brief Has DMA Enable register (LLWU_DE). */ #define FSL_FEATURE_LLWU_HAS_DMA_ENABLE_REG (0) #elif defined(CPU_MK82FN256VLQ15) /* @brief Maximum number of pins (maximal index plus one) connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN (26) /* @brief Has pins 8-15 connected to LLWU device. */ #define FSL_FEATURE_LLWU_EXTERNAL_PIN_GROUP2 (1) /* @brief Maximum number of internal modules connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE (8) /* @brief Number of digital filters. */ #define FSL_FEATURE_LLWU_HAS_PIN_FILTER (4) /* @brief Has MF register. */ #define FSL_FEATURE_LLWU_HAS_MF (1) /* @brief Has PF register. */ #define FSL_FEATURE_LLWU_HAS_PF (1) /* @brief Has possibility to enable reset in low leakage power mode and enable digital filter for RESET pin (register LLWU_RST). */ #define FSL_FEATURE_LLWU_HAS_RESET_ENABLE (0) /* @brief Has no internal module wakeup flag register. */ #define FSL_FEATURE_LLWU_HAS_NO_INTERNAL_MODULE_WAKEUP_FLAG_REG (0) /* @brief Has external pin 0 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN0 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN0_GPIO_IDX (GPIOE_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN0_GPIO_PIN (1) /* @brief Has external pin 1 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN1 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN1_GPIO_IDX (GPIOE_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN1_GPIO_PIN (2) /* @brief Has external pin 2 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN2 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN2_GPIO_IDX (GPIOE_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN2_GPIO_PIN (4) /* @brief Has external pin 3 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN3 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN3_GPIO_IDX (GPIOA_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN3_GPIO_PIN (4) /* @brief Has external pin 4 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN4 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN4_GPIO_IDX (GPIOA_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN4_GPIO_PIN (13) /* @brief Has external pin 5 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN5 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN5_GPIO_IDX (GPIOB_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN5_GPIO_PIN (0) /* @brief Has external pin 6 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN6 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN6_GPIO_IDX (GPIOC_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN6_GPIO_PIN (1) /* @brief Has external pin 7 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN7 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN7_GPIO_IDX (GPIOC_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN7_GPIO_PIN (3) /* @brief Has external pin 8 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN8 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN8_GPIO_IDX (GPIOC_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN8_GPIO_PIN (4) /* @brief Has external pin 9 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN9 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN9_GPIO_IDX (GPIOC_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN9_GPIO_PIN (5) /* @brief Has external pin 10 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN10 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN10_GPIO_IDX (GPIOC_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN10_GPIO_PIN (6) /* @brief Has external pin 11 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN11 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN11_GPIO_IDX (GPIOC_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN11_GPIO_PIN (11) /* @brief Has external pin 12 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN12 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN12_GPIO_IDX (GPIOD_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN12_GPIO_PIN (0) /* @brief Has external pin 13 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN13 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN13_GPIO_IDX (GPIOD_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN13_GPIO_PIN (2) /* @brief Has external pin 14 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN14 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN14_GPIO_IDX (GPIOD_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN14_GPIO_PIN (4) /* @brief Has external pin 15 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN15 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN15_GPIO_IDX (GPIOD_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN15_GPIO_PIN (6) /* @brief Has external pin 16 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN16 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN16_GPIO_IDX (GPIOE_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN16_GPIO_PIN (6) /* @brief Has external pin 17 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN17 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN17_GPIO_IDX (GPIOE_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN17_GPIO_PIN (9) /* @brief Has external pin 18 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN18 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN18_GPIO_IDX (GPIOE_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN18_GPIO_PIN (10) /* @brief Has external pin 19 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN19 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN19_GPIO_IDX (GPIOE_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN19_GPIO_PIN (17) /* @brief Has external pin 20 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN20 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN20_GPIO_IDX (GPIOE_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN20_GPIO_PIN (18) /* @brief Has external pin 21 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN21 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN21_GPIO_IDX (GPIOA_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN21_GPIO_PIN (21) /* @brief Has external pin 22 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN22 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN22_GPIO_IDX (GPIOA_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN22_GPIO_PIN (10) /* @brief Has external pin 23 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN23 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN23_GPIO_IDX (GPIOA_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN23_GPIO_PIN (11) /* @brief Has external pin 24 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN24 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN24_GPIO_IDX (GPIOD_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN24_GPIO_PIN (8) /* @brief Has external pin 25 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN25 (1) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN25_GPIO_IDX (GPIOD_IDX) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN25_GPIO_PIN (11) /* @brief Has external pin 26 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN26 (0) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN26_GPIO_IDX (0) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN26_GPIO_PIN (0) /* @brief Has external pin 27 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN27 (0) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN27_GPIO_IDX (0) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN27_GPIO_PIN (0) /* @brief Has external pin 28 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN28 (0) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN28_GPIO_IDX (0) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN28_GPIO_PIN (0) /* @brief Has external pin 29 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN29 (0) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN29_GPIO_IDX (0) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN29_GPIO_PIN (0) /* @brief Has external pin 30 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN30 (0) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN30_GPIO_IDX (0) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN30_GPIO_PIN (0) /* @brief Has external pin 31 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_EXTERNAL_PIN31 (0) /* @brief Index of port of external pin. */ #define FSL_FEATURE_LLWU_PIN31_GPIO_IDX (0) /* @brief Number of external pin port on specified port. */ #define FSL_FEATURE_LLWU_PIN31_GPIO_PIN (0) /* @brief Has internal module 0 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE0 (1) /* @brief Has internal module 1 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE1 (1) /* @brief Has internal module 2 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE2 (1) /* @brief Has internal module 3 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE3 (0) /* @brief Has internal module 4 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE4 (1) /* @brief Has internal module 5 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE5 (1) /* @brief Has internal module 6 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE6 (0) /* @brief Has internal module 7 connected to LLWU device. */ #define FSL_FEATURE_LLWU_HAS_INTERNAL_MODULE7 (1) /* @brief Has Version ID Register (LLWU_VERID). */ #define FSL_FEATURE_LLWU_HAS_VERID (0) /* @brief Has Parameter Register (LLWU_PARAM). */ #define FSL_FEATURE_LLWU_HAS_PARAM (0) /* @brief Width of registers of the LLWU. */ #define FSL_FEATURE_LLWU_REG_BITWIDTH (8) /* @brief Has DMA Enable register (LLWU_DE). */ #define FSL_FEATURE_LLWU_HAS_DMA_ENABLE_REG (0) #endif /* defined(CPU_MK82FN256CAx15) || defined(CPU_MK82FN256VDC15) */ /* LMEM module features */ /* @brief Has process identifier support. */ #define FSL_FEATURE_LMEM_HAS_SYSTEMBUS_CACHE (1) /* @brief Has L1 cache. */ #define FSL_FEATURE_HAS_L1CACHE (1) /* @brief L1 ICACHE line size in byte. */ #define FSL_FEATURE_L1ICACHE_LINESIZE_BYTE (16) /* @brief L1 DCACHE line size in byte. */ #define FSL_FEATURE_L1DCACHE_LINESIZE_BYTE (16) /* LPTMR module features */ /* @brief Has shared interrupt handler with another LPTMR module. */ #define FSL_FEATURE_LPTMR_HAS_SHARED_IRQ_HANDLER (1) /* @brief Whether LPTMR counter is 32 bits width. */ #define FSL_FEATURE_LPTMR_CNR_WIDTH_IS_32B (0) /* @brief Has timer DMA request enable (register bit CSR[TDRE]). */ #define FSL_FEATURE_LPTMR_HAS_CSR_TDRE (0) /* LPUART module features */ /* @brief LPUART0 and LPUART1 has shared interrupt vector. */ #define FSL_FEATURE_LPUART_HAS_SHARED_IRQ0_IRQ1 (0) /* @brief Has receive FIFO overflow detection (bit field CFIFO[RXOFE]). */ #define FSL_FEATURE_LPUART_HAS_IRQ_EXTENDED_FUNCTIONS (0) /* @brief Has low power features (can be enabled in wait mode via register bit C1[DOZEEN] or CTRL[DOZEEN] if the registers are 32-bit wide). */ #define FSL_FEATURE_LPUART_HAS_LOW_POWER_UART_SUPPORT (1) /* @brief Has extended data register ED (or extra flags in the DATA register if the registers are 32-bit wide). */ #define FSL_FEATURE_LPUART_HAS_EXTENDED_DATA_REGISTER_FLAGS (1) /* @brief Capacity (number of entries) of the transmit/receive FIFO (or zero if no FIFO is available). */ #define FSL_FEATURE_LPUART_HAS_FIFO (1) /* @brief Has 32-bit register MODIR */ #define FSL_FEATURE_LPUART_HAS_MODIR (1) /* @brief Hardware flow control (RTS, CTS) is supported. */ #define FSL_FEATURE_LPUART_HAS_MODEM_SUPPORT (1) /* @brief Infrared (modulation) is supported. */ #define FSL_FEATURE_LPUART_HAS_IR_SUPPORT (1) /* @brief 2 bits long stop bit is available. */ #define FSL_FEATURE_LPUART_HAS_STOP_BIT_CONFIG_SUPPORT (1) /* @brief If 10-bit mode is supported. */ #define FSL_FEATURE_LPUART_HAS_10BIT_DATA_SUPPORT (1) /* @brief If 7-bit mode is supported. */ #define FSL_FEATURE_LPUART_HAS_7BIT_DATA_SUPPORT (0) /* @brief Baud rate fine adjustment is available. */ #define FSL_FEATURE_LPUART_HAS_BAUD_RATE_FINE_ADJUST_SUPPORT (0) /* @brief Baud rate oversampling is available (has bit fields C4[OSR], C5[BOTHEDGE], C5[RESYNCDIS] or BAUD[OSR], BAUD[BOTHEDGE], BAUD[RESYNCDIS] if the registers are 32-bit wide). */ #define FSL_FEATURE_LPUART_HAS_BAUD_RATE_OVER_SAMPLING_SUPPORT (1) /* @brief Baud rate oversampling is available. */ #define FSL_FEATURE_LPUART_HAS_RX_RESYNC_SUPPORT (1) /* @brief Baud rate oversampling is available. */ #define FSL_FEATURE_LPUART_HAS_BOTH_EDGE_SAMPLING_SUPPORT (1) /* @brief Peripheral type. */ #define FSL_FEATURE_LPUART_IS_SCI (1) /* @brief Capacity (number of entries) of the transmit/receive FIFO (or zero if no FIFO is available). */ #define FSL_FEATURE_LPUART_FIFO_SIZEn(x) \ ((x) == LPUART0 ? (8) : \ ((x) == LPUART1 ? (8) : \ ((x) == LPUART2 ? (1) : \ ((x) == LPUART3 ? (1) : \ ((x) == LPUART4 ? (1) : (-1)))))) /* @brief Maximal data width without parity bit. */ #define FSL_FEATURE_LPUART_MAX_DATA_WIDTH_WITH_NO_PARITY (10) /* @brief Maximal data width with parity bit. */ #define FSL_FEATURE_LPUART_MAX_DATA_WIDTH_WITH_PARITY (9) /* @brief Supports two match addresses to filter incoming frames. */ #define FSL_FEATURE_LPUART_HAS_ADDRESS_MATCHING (1) /* @brief Has transmitter/receiver DMA enable bits C5[TDMAE]/C5[RDMAE] (or BAUD[TDMAE]/BAUD[RDMAE] if the registers are 32-bit wide). */ #define FSL_FEATURE_LPUART_HAS_DMA_ENABLE (1) /* @brief Has transmitter/receiver DMA select bits C4[TDMAS]/C4[RDMAS], resp. C5[TDMAS]/C5[RDMAS] if IS_SCI = 0. */ #define FSL_FEATURE_LPUART_HAS_DMA_SELECT (0) /* @brief Data character bit order selection is supported (bit field S2[MSBF] or STAT[MSBF] if the registers are 32-bit wide). */ #define FSL_FEATURE_LPUART_HAS_BIT_ORDER_SELECT (1) /* @brief Has smart card (ISO7816 protocol) support and no improved smart card support. */ #define FSL_FEATURE_LPUART_HAS_SMART_CARD_SUPPORT (0) /* @brief Has improved smart card (ISO7816 protocol) support. */ #define FSL_FEATURE_LPUART_HAS_IMPROVED_SMART_CARD_SUPPORT (0) /* @brief Has local operation network (CEA709.1-B protocol) support. */ #define FSL_FEATURE_LPUART_HAS_LOCAL_OPERATION_NETWORK_SUPPORT (0) /* @brief Has 32-bit registers (BAUD, STAT, CTRL, DATA, MATCH, MODIR) instead of 8-bit (BDH, BDL, C1, S1, D, etc.). */ #define FSL_FEATURE_LPUART_HAS_32BIT_REGISTERS (1) /* @brief Lin break detect available (has bit BAUD[LBKDIE]). */ #define FSL_FEATURE_LPUART_HAS_LIN_BREAK_DETECT (1) /* @brief UART stops in Wait mode available (has bit C1[UARTSWAI]). */ #define FSL_FEATURE_LPUART_HAS_WAIT_MODE_OPERATION (0) /* @brief Has separate DMA RX and TX requests. */ #define FSL_FEATURE_LPUART_HAS_SEPARATE_DMA_RX_TX_REQn(x) (1) /* @brief Has separate RX and TX interrupts. */ #define FSL_FEATURE_LPUART_HAS_SEPARATE_RX_TX_IRQ (0) /* @brief Has LPAURT_PARAM. */ #define FSL_FEATURE_LPUART_HAS_PARAM (0) /* @brief Has LPUART_VERID. */ #define FSL_FEATURE_LPUART_HAS_VERID (0) /* @brief Has LPUART_GLOBAL. */ #define FSL_FEATURE_LPUART_HAS_GLOBAL (0) /* @brief Has LPUART_PINCFG. */ #define FSL_FEATURE_LPUART_HAS_PINCFG (0) /* LTC module features */ /* @brief LTC module supports DES algorithm. */ #define FSL_FEATURE_LTC_HAS_DES (1) /* @brief LTC module supports PKHA algorithm. */ #define FSL_FEATURE_LTC_HAS_PKHA (1) /* @brief LTC module supports SHA algorithm. */ #define FSL_FEATURE_LTC_HAS_SHA (0) /* @brief LTC module supports AES GCM mode. */ #define FSL_FEATURE_LTC_HAS_GCM (1) /* @brief LTC module supports DPAMS registers. */ #define FSL_FEATURE_LTC_HAS_DPAMS (1) /* @brief LTC module supports AES with 24 bytes key. */ #define FSL_FEATURE_LTC_HAS_AES192 (1) /* @brief LTC module supports AES with 32 bytes key. */ #define FSL_FEATURE_LTC_HAS_AES256 (1) /* MCG module features */ /* @brief PRDIV base value (divider of register bit field [PRDIV] zero value). */ #define FSL_FEATURE_MCG_PLL_PRDIV_BASE (1) /* @brief Maximum PLL external reference divider value (max. value of register bit field C5[PRVDIV]). */ #define FSL_FEATURE_MCG_PLL_PRDIV_MAX (7) /* @brief VCO divider base value (multiply factor of register bit field C6[VDIV] zero value). */ #define FSL_FEATURE_MCG_PLL_VDIV_BASE (16) /* @brief PLL reference clock low range. OSCCLK/PLL_R. */ #define FSL_FEATURE_MCG_PLL_REF_MIN (8000000) /* @brief PLL reference clock high range. OSCCLK/PLL_R. */ #define FSL_FEATURE_MCG_PLL_REF_MAX (16000000) /* @brief The PLL clock is divided by 2 before VCO divider. */ #define FSL_FEATURE_MCG_HAS_PLL_INTERNAL_DIV (1) /* @brief FRDIV supports 1280. */ #define FSL_FEATURE_MCG_FRDIV_SUPPORT_1280 (1) /* @brief FRDIV supports 1536. */ #define FSL_FEATURE_MCG_FRDIV_SUPPORT_1536 (1) /* @brief MCGFFCLK divider. */ #define FSL_FEATURE_MCG_FFCLK_DIV (1) /* @brief Is PLL clock divided by 2 before MCG PLL/FLL clock selection in the SIM module. */ #define FSL_FEATURE_MCG_HAS_PLL_EXTRA_DIV (0) /* @brief Has 32kHz RTC external reference clock (register bits C8[LOCS1], C8[CME1], C8[LOCRE1] and RTC module are present). */ #define FSL_FEATURE_MCG_HAS_RTC_32K (1) /* @brief Has PLL1 external reference clock (registers C10, C11, C12, S2). */ #define FSL_FEATURE_MCG_HAS_PLL1 (0) /* @brief Has 48MHz internal oscillator. */ #define FSL_FEATURE_MCG_HAS_IRC_48M (1) /* @brief Has OSC1 external oscillator (registers C10, C11, C12, S2). */ #define FSL_FEATURE_MCG_HAS_OSC1 (0) /* @brief Has fast internal reference clock fine trim (register bit C2[FCFTRIM]). */ #define FSL_FEATURE_MCG_HAS_FCFTRIM (1) /* @brief Has PLL loss of lock reset (register bit C8[LOLRE]). */ #define FSL_FEATURE_MCG_HAS_LOLRE (1) /* @brief Has MCG OSC clock selection (register bit C7[OSCSEL]). */ #define FSL_FEATURE_MCG_USE_OSCSEL (1) /* @brief Has PLL external reference selection (register bits C5[PLLREFSEL0] and C11[PLLREFSEL1]). */ #define FSL_FEATURE_MCG_USE_PLLREFSEL (0) /* @brief TBD */ #define FSL_FEATURE_MCG_USE_SYSTEM_CLOCK (0) /* @brief Has phase-locked loop (PLL) (register C5 and bits C6[VDIV], C6[PLLS], C6[LOLIE0], S[PLLST], S[LOCK0], S[LOLS0]). */ #define FSL_FEATURE_MCG_HAS_PLL (1) /* @brief Has phase-locked loop (PLL) PRDIV (register C5[PRDIV]. */ #define FSL_FEATURE_MCG_HAS_PLL_PRDIV (1) /* @brief Has phase-locked loop (PLL) VDIV (register C6[VDIV]. */ #define FSL_FEATURE_MCG_HAS_PLL_VDIV (1) /* @brief PLL/OSC related register bit fields have PLL/OSC index in their name. */ #define FSL_FEATURE_MCG_HAS_PLL_OSC_INDEX (0) /* @brief Has frequency-locked loop (FLL) (register ATCVH, ATCVL and bits C1[IREFS], C1[FRDIV]). */ #define FSL_FEATURE_MCG_HAS_FLL (1) /* @brief Has PLL external to MCG (C9[PLL_CME], C9[PLL_LOCRE], C9[EXT_PLL_LOCS]). */ #define FSL_FEATURE_MCG_HAS_EXTERNAL_PLL (0) /* @brief Has crystal oscillator or external reference clock low power controls (register bits C2[HGO], C2[RANGE]). */ #define FSL_FEATURE_MCG_HAS_EXT_REF_LOW_POWER_CONTROL (1) /* @brief Has PLL/FLL selection as MCG output (register bit C6[PLLS]). */ #define FSL_FEATURE_MCG_HAS_PLL_FLL_SELECTION (1) /* @brief Has PLL output selection (PLL0/PLL1, PLL/external PLL) (register bit C11[PLLCS]). */ #define FSL_FEATURE_MCG_HAS_PLL_OUTPUT_SELECTION (0) /* @brief Has automatic trim machine (registers ATCVH, ATCVL and bits SC[ATMF], SC[ATMS], SC[ATME]). */ #define FSL_FEATURE_MCG_HAS_AUTO_TRIM_MACHINE (1) /* @brief Has external clock monitor (register bit C6[CME]). */ #define FSL_FEATURE_MCG_HAS_EXTERNAL_CLOCK_MONITOR (1) /* @brief Has low frequency internal reference clock (IRC) (registers LTRIMRNG, LFRIM, LSTRIM and bit MC[LIRC_DIV2]). */ #define FSL_FEATURE_MCG_HAS_LOW_FREQ_IRC (0) /* @brief Has high frequency internal reference clock (IRC) (registers HCTRIM, HTTRIM, HFTRIM and bit MC[HIRCEN]). */ #define FSL_FEATURE_MCG_HAS_HIGH_FREQ_IRC (0) /* @brief Has PEI mode or PBI mode. */ #define FSL_FEATURE_MCG_HAS_PLL_INTERNAL_MODE (0) /* @brief Reset clock mode is BLPI. */ #define FSL_FEATURE_MCG_RESET_IS_BLPI (0) /* interrupt module features */ /* @brief Lowest interrupt request number. */ #define FSL_FEATURE_INTERRUPT_IRQ_MIN (-14) /* @brief Highest interrupt request number. */ #define FSL_FEATURE_INTERRUPT_IRQ_MAX (104) /* OSC module features */ /* @brief Has OSC1 external oscillator. */ #define FSL_FEATURE_OSC_HAS_OSC1 (0) /* @brief Has OSC0 external oscillator. */ #define FSL_FEATURE_OSC_HAS_OSC0 (0) /* @brief Has OSC external oscillator (without index). */ #define FSL_FEATURE_OSC_HAS_OSC (1) /* @brief Number of OSC external oscillators. */ #define FSL_FEATURE_OSC_OSC_COUNT (1) /* @brief Has external reference clock divider (register bit field DIV[ERPS]). */ #define FSL_FEATURE_OSC_HAS_EXT_REF_CLOCK_DIVIDER (1) /* PDB module features */ /* @brief Define the count of supporting ADC pre-trigger for each channel. */ #define FSL_FEATURE_PDB_ADC_PRE_CHANNEL_COUNT (2) /* @brief Has DAC support. */ #define FSL_FEATURE_PDB_HAS_DAC (1) /* @brief Has shared interrupt handler (has not individual interrupt handler for each channel). */ #define FSL_FEATURE_PDB_HAS_SHARED_IRQ_HANDLER (0) /* PIT module features */ /* @brief Number of channels (related to number of registers LDVALn, CVALn, TCTRLn, TFLGn). */ #define FSL_FEATURE_PIT_TIMER_COUNT (4) /* @brief Has lifetime timer (related to existence of registers LTMR64L and LTMR64H). */ #define FSL_FEATURE_PIT_HAS_LIFETIME_TIMER (1) /* @brief Has chain mode (related to existence of register bit field TCTRLn[CHN]). */ #define FSL_FEATURE_PIT_HAS_CHAIN_MODE (1) /* @brief Has shared interrupt handler (has not individual interrupt handler for each channel). */ #define FSL_FEATURE_PIT_HAS_SHARED_IRQ_HANDLER (0) /* @brief Has timer enable control. */ #define FSL_FEATURE_PIT_HAS_MDIS (1) /* PMC module features */ /* @brief Has Bandgap Enable In VLPx Operation support. */ #define FSL_FEATURE_PMC_HAS_BGEN (1) /* @brief Has Bandgap Buffer Enable. */ #define FSL_FEATURE_PMC_HAS_BGBE (1) /* @brief Has Bandgap Buffer Drive Select. */ #define FSL_FEATURE_PMC_HAS_BGBDS (0) /* @brief Has Low-Voltage Detect Voltage Select support. */ #define FSL_FEATURE_PMC_HAS_LVDV (1) /* @brief Has Low-Voltage Warning Voltage Select support. */ #define FSL_FEATURE_PMC_HAS_LVWV (1) /* @brief Has LPO. */ #define FSL_FEATURE_PMC_HAS_LPO (0) /* @brief Has VLPx option PMC_REGSC[VLPO]. */ #define FSL_FEATURE_PMC_HAS_VLPO (0) /* @brief Has acknowledge isolation support. */ #define FSL_FEATURE_PMC_HAS_ACKISO (1) /* @brief Has Regulator In Full Performance Mode Status Bit PMC_REGSC[REGFPM]. */ #define FSL_FEATURE_PMC_HAS_REGFPM (0) /* @brief Has Regulator In Run Regulation Status Bit PMC_REGSC[REGONS]. */ #define FSL_FEATURE_PMC_HAS_REGONS (1) /* @brief Has PMC_HVDSC1. */ #define FSL_FEATURE_PMC_HAS_HVDSC1 (1) /* @brief Has PMC_PARAM. */ #define FSL_FEATURE_PMC_HAS_PARAM (0) /* @brief Has PMC_VERID. */ #define FSL_FEATURE_PMC_HAS_VERID (0) /* PORT module features */ /* @brief Has control lock (register bit PCR[LK]). */ #define FSL_FEATURE_PORT_HAS_PIN_CONTROL_LOCK (1) /* @brief Has open drain control (register bit PCR[ODE]). */ #define FSL_FEATURE_PORT_HAS_OPEN_DRAIN (1) /* @brief Has digital filter (registers DFER, DFCR and DFWR). */ #define FSL_FEATURE_PORT_HAS_DIGITAL_FILTER (1) /* @brief Has DMA request (register bit field PCR[IRQC] values). */ #define FSL_FEATURE_PORT_HAS_DMA_REQUEST (1) /* @brief Has pull resistor selection available. */ #define FSL_FEATURE_PORT_HAS_PULL_SELECTION (1) /* @brief Has pull resistor enable (register bit PCR[PE]). */ #define FSL_FEATURE_PORT_HAS_PULL_ENABLE (1) /* @brief Has slew rate control (register bit PCR[SRE]). */ #define FSL_FEATURE_PORT_HAS_SLEW_RATE (1) /* @brief Has passive filter (register bit field PCR[PFE]). */ #define FSL_FEATURE_PORT_HAS_PASSIVE_FILTER (1) /* @brief Has drive strength control (register bit PCR[DSE]). */ #define FSL_FEATURE_PORT_HAS_DRIVE_STRENGTH (1) /* @brief Has separate drive strength register (HDRVE). */ #define FSL_FEATURE_PORT_HAS_DRIVE_STRENGTH_REGISTER (0) /* @brief Has glitch filter (register IOFLT). */ #define FSL_FEATURE_PORT_HAS_GLITCH_FILTER (0) /* @brief Defines width of PCR[MUX] field. */ #define FSL_FEATURE_PORT_PCR_MUX_WIDTH (3) /* @brief Has dedicated interrupt vector. */ #define FSL_FEATURE_PORT_HAS_INTERRUPT_VECTOR (1) /* @brief Has multiple pin IRQ configuration (register GICLR and GICHR). */ #define FSL_FEATURE_PORT_HAS_MULTIPLE_IRQ_CONFIG (0) /* @brief Defines whether PCR[IRQC] bit-field has flag states. */ #define FSL_FEATURE_PORT_HAS_IRQC_FLAG (0) /* @brief Defines whether PCR[IRQC] bit-field has trigger states. */ #define FSL_FEATURE_PORT_HAS_IRQC_TRIGGER (0) /* QSPI module features */ /* @brief QSPI lookup table depth. */ #define FSL_FEATURE_QSPI_LUT_DEPTH (64) /* @brief QSPI Tx FIFO depth. */ #define FSL_FEATURE_QSPI_TXFIFO_DEPTH (16) /* @brief QSPI Rx FIFO depth. */ #define FSL_FEATURE_QSPI_RXFIFO_DEPTH (16) /* @brief QSPI AHB buffer count. */ #define FSL_FEATURE_QSPI_AHB_BUFFER_COUNT (4) /* @brief QSPI AMBA base address. */ #define FSL_FEATURE_QSPI_AMBA_BASE (0x68000000U) /* @brief QSPI AHB buffer ARDB base address. */ #define FSL_FEATURE_QSPI_ARDB_BASE (0x67000000U) /* @brief QSPI has command usage error flag. */ #define FSL_FEATURE_QSPI_HAS_IP_COMMAND_USAGE_ERROR (1) /* @brief QSPI support parallel mode. */ #define FSL_FEATURE_QSPI_SUPPORT_PARALLEL_MODE (1) /* @brief QSPI support dual die. */ #define FSL_FEATURE_QSPI_SUPPORT_DUAL_DIE (1) /* RCM module features */ /* @brief Has Loss-of-Lock Reset support. */ #define FSL_FEATURE_RCM_HAS_LOL (1) /* @brief Has Loss-of-Clock Reset support. */ #define FSL_FEATURE_RCM_HAS_LOC (1) /* @brief Has JTAG generated Reset support. */ #define FSL_FEATURE_RCM_HAS_JTAG (1) /* @brief Has EzPort generated Reset support. */ #define FSL_FEATURE_RCM_HAS_EZPORT (0) /* @brief Has bit-field indicating EZP_MS_B pin state during last reset. */ #define FSL_FEATURE_RCM_HAS_EZPMS (0) /* @brief Has boot ROM configuration, MR[BOOTROM], FM[FORCEROM] */ #define FSL_FEATURE_RCM_HAS_BOOTROM (1) /* @brief Has sticky system reset status register RCM_SSRS0 and RCM_SSRS1. */ #define FSL_FEATURE_RCM_HAS_SSRS (1) /* @brief Has Version ID Register (RCM_VERID). */ #define FSL_FEATURE_RCM_HAS_VERID (0) /* @brief Has Parameter Register (RCM_PARAM). */ #define FSL_FEATURE_RCM_HAS_PARAM (0) /* @brief Has Reset Interrupt Enable Register RCM_SRIE. */ #define FSL_FEATURE_RCM_HAS_SRIE (0) /* @brief Width of registers of the RCM. */ #define FSL_FEATURE_RCM_REG_WIDTH (8) /* @brief Has Core 1 generated Reset support RCM_SRS[CORE1] */ #define FSL_FEATURE_RCM_HAS_CORE1 (0) /* @brief Has MDM-AP system reset support RCM_SRS1[MDM_AP] */ #define FSL_FEATURE_RCM_HAS_MDM_AP (1) /* @brief Has wakeup reset feature. Register bit SRS[WAKEUP]. */ #define FSL_FEATURE_RCM_HAS_WAKEUP (1) /* RTC module features */ /* @brief Has wakeup pin. */ #define FSL_FEATURE_RTC_HAS_WAKEUP_PIN (1) /* @brief Has wakeup pin selection (bit field CR[WPS]). */ #define FSL_FEATURE_RTC_HAS_WAKEUP_PIN_SELECTION (1) /* @brief Has low power features (registers MER, MCLR and MCHR). */ #define FSL_FEATURE_RTC_HAS_MONOTONIC (0) /* @brief Has read/write access control (registers WAR and RAR). */ #define FSL_FEATURE_RTC_HAS_ACCESS_CONTROL (1) /* @brief Has security features (registers TTSR, MER, MCLR and MCHR). */ #define FSL_FEATURE_RTC_HAS_SECURITY (1) /* @brief Has RTC_CLKIN available. */ #define FSL_FEATURE_RTC_HAS_RTC_CLKIN (0) /* @brief Has prescaler adjust for LPO. */ #define FSL_FEATURE_RTC_HAS_LPO_ADJUST (0) /* @brief Has Clock Pin Enable field. */ #define FSL_FEATURE_RTC_HAS_CPE (0) /* @brief Has Timer Seconds Interrupt Configuration field. */ #define FSL_FEATURE_RTC_HAS_TSIC (0) /* @brief Has OSC capacitor setting RTC_CR[SC2P ~ SC16P] */ #define FSL_FEATURE_RTC_HAS_OSC_SCXP (1) /* @brief Has Tamper Interrupt Register (register TIR). */ #define FSL_FEATURE_RTC_HAS_TIR (0) /* @brief Has Tamper Pin Interrupt Enable (bitfield TIR[TPIE]). */ #define FSL_FEATURE_RTC_HAS_TIR_TPIE (0) /* @brief Has Security Interrupt Enable (bitfield TIR[SIE]). */ #define FSL_FEATURE_RTC_HAS_TIR_SIE (0) /* @brief Has Loss of Clock Interrupt Enable (bitfield TIR[LCIE]). */ #define FSL_FEATURE_RTC_HAS_TIR_LCIE (0) /* @brief Has Tamper Interrupt Detect Flag (bitfield SR[TIDF]). */ #define FSL_FEATURE_RTC_HAS_SR_TIDF (0) /* @brief Has Tamper Detect Register (register TDR). */ #define FSL_FEATURE_RTC_HAS_TDR (0) /* @brief Has Tamper Pin Flag (bitfield TDR[TPF]). */ #define FSL_FEATURE_RTC_HAS_TDR_TPF (0) /* @brief Has Security Tamper Flag (bitfield TDR[STF]). */ #define FSL_FEATURE_RTC_HAS_TDR_STF (0) /* @brief Has Loss of Clock Tamper Flag (bitfield TDR[LCTF]). */ #define FSL_FEATURE_RTC_HAS_TDR_LCTF (0) /* @brief Has Tamper Time Seconds Register (register TTSR). */ #define FSL_FEATURE_RTC_HAS_TTSR (0) /* @brief Has Pin Configuration Register (register PCR). */ #define FSL_FEATURE_RTC_HAS_PCR (0) /* SDHC module features */ /* @brief Has external DMA support (register bit VENDOR[EXTDMAEN]). */ #define FSL_FEATURE_SDHC_HAS_EXTERNAL_DMA_SUPPORT (0) /* @brief Has support of 3.0V voltage (register bit HTCAPBLT[VS30]). */ #define FSL_FEATURE_SDHC_HAS_V300_SUPPORT (0) /* @brief Has support of 1.8V voltage (register bit HTCAPBLT[VS18]). */ #define FSL_FEATURE_SDHC_HAS_V180_SUPPORT (0) /* SIM module features */ /* @brief Has USB FS divider. */ #define FSL_FEATURE_SIM_USBFS_USE_SPECIAL_DIVIDER (0) /* @brief Is PLL clock divided by 2 before MCG PLL/FLL clock selection. */ #define FSL_FEATURE_SIM_PLLCLK_USE_SPECIAL_DIVIDER (0) /* @brief Has RAM size specification (register bit field SOPT1[RAMSIZE]). */ #define FSL_FEATURE_SIM_OPT_HAS_RAMSIZE (1) /* @brief Has 32k oscillator clock output (register bit SOPT1[OSC32KOUT]). */ #define FSL_FEATURE_SIM_OPT_HAS_OSC32K_OUT (0) /* @brief Has 32k oscillator clock selection (register bit field SOPT1[OSC32KSEL]). */ #define FSL_FEATURE_SIM_OPT_HAS_OSC32K_SELECTION (1) /* @brief 32k oscillator clock selection width (width of register bit field SOPT1[OSC32KSEL]). */ #define FSL_FEATURE_SIM_OPT_OSC32K_SELECTION_WIDTH (2) /* @brief Has RTC clock output selection (register bit SOPT2[RTCCLKOUTSEL]). */ #define FSL_FEATURE_SIM_OPT_HAS_RTC_CLOCK_OUT_SELECTION (1) /* @brief Has USB voltage regulator (register bits SOPT1[USBVSTBY], SOPT1[USBSSTBY], SOPT1[USBREGEN], SOPT1CFG[URWE], SOPT1CFG[UVSWE], SOPT1CFG[USSWE]). */ #define FSL_FEATURE_SIM_OPT_HAS_USB_VOLTAGE_REGULATOR (1) /* @brief USB has integrated PHY (register bits USBPHYCTL[USBVREGSEL], USBPHYCTL[USBVREGPD], USBPHYCTL[USB3VOUTTRG], USBPHYCTL[USBDISILIM], SOPT2[USBSLSRC], SOPT2[USBREGEN]). */ #define FSL_FEATURE_SIM_OPT_HAS_USB_PHY (0) /* @brief Has PTD7 pad drive strength control (register bit SOPT2[PTD7PAD]). */ #define FSL_FEATURE_SIM_OPT_HAS_PTD7PAD (0) /* @brief Has FlexBus security level selection (register bit SOPT2[FBSL]). */ #define FSL_FEATURE_SIM_OPT_HAS_FBSL (1) /* @brief Has number of FlexBus hold cycle before FlexBus can release bus (register bit SOPT6[PCR]). */ #define FSL_FEATURE_SIM_OPT_HAS_PCR (0) /* @brief Has number of NFC hold cycle in case of FlexBus request (register bit SOPT6[MCC]). */ #define FSL_FEATURE_SIM_OPT_HAS_MCC (0) /* @brief Has UART open drain enable (register bits UARTnODE, where n is a number, in register SOPT5). */ #define FSL_FEATURE_SIM_OPT_HAS_ODE (0) /* @brief Number of LPUART modules (number of register bits LPUARTn, where n is a number, in register SCGC5). */ #define FSL_FEATURE_SIM_OPT_LPUART_COUNT (5) /* @brief Number of UART modules (number of register bits UARTn, where n is a number, in register SCGC4). */ #define FSL_FEATURE_SIM_OPT_UART_COUNT (0) /* @brief Has UART0 open drain enable (register bit SOPT5[UART0ODE]). */ #define FSL_FEATURE_SIM_OPT_HAS_UART0_ODE (0) /* @brief Has UART1 open drain enable (register bit SOPT5[UART1ODE]). */ #define FSL_FEATURE_SIM_OPT_HAS_UART1_ODE (0) /* @brief Has UART2 open drain enable (register bit SOPT5[UART2ODE]). */ #define FSL_FEATURE_SIM_OPT_HAS_UART2_ODE (0) /* @brief Has LPUART0 open drain enable (register bit SOPT5[LPUART0ODE]). */ #define FSL_FEATURE_SIM_OPT_HAS_LPUART0_ODE (0) /* @brief Has LPUART1 open drain enable (register bit SOPT5[LPUART1ODE]). */ #define FSL_FEATURE_SIM_OPT_HAS_LPUART1_ODE (0) /* @brief Has CMT/UART pad drive strength control (register bit SOPT2[CMTUARTPAD]). */ #define FSL_FEATURE_SIM_OPT_HAS_CMTUARTPAD (0) /* @brief Has LPUART0 transmit data source selection (register bit SOPT5[LPUART0TXSRC]). */ #define FSL_FEATURE_SIM_OPT_HAS_LPUART0_TX_SRC (1) /* @brief Has LPUART0 receive data source selection (register bit SOPT5[LPUART0RXSRC]). */ #define FSL_FEATURE_SIM_OPT_HAS_LPUART0_RX_SRC (1) /* @brief Has LPUART1 transmit data source selection (register bit SOPT5[LPUART1TXSRC]). */ #define FSL_FEATURE_SIM_OPT_HAS_LPUART1_TX_SRC (1) /* @brief Has LPUART1 receive data source selection (register bit SOPT5[LPUART1RXSRC]). */ #define FSL_FEATURE_SIM_OPT_HAS_LPUART1_RX_SRC (1) /* @brief Has UART0 transmit data source selection (register bit SOPT5[UART0TXSRC]). */ #define FSL_FEATURE_SIM_OPT_HAS_UART0_TX_SRC (0) /* @brief UART0 transmit data source selection width (width of register bit SOPT5[UART0TXSRC]). */ #define FSL_FEATURE_SIM_OPT_UART0_TX_SRC_WIDTH (0) /* @brief Has UART0 receive data source selection (register bit SOPT5[UART0RXSRC]). */ #define FSL_FEATURE_SIM_OPT_HAS_UART0_RX_SRC (0) /* @brief UART0 receive data source selection width (width of register bit SOPT5[UART0RXSRC]). */ #define FSL_FEATURE_SIM_OPT_UART0_RX_SRC_WIDTH (0) /* @brief Has UART1 transmit data source selection (register bit SOPT5[UART1TXSRC]). */ #define FSL_FEATURE_SIM_OPT_HAS_UART1_TX_SRC (0) /* @brief Has UART1 receive data source selection (register bit SOPT5[UART1RXSRC]). */ #define FSL_FEATURE_SIM_OPT_HAS_UART1_RX_SRC (0) /* @brief UART1 receive data source selection width (width of register bit SOPT5[UART1RXSRC]). */ #define FSL_FEATURE_SIM_OPT_UART1_RX_SRC_WIDTH (0) /* @brief Has FTM module(s) configuration. */ #define FSL_FEATURE_SIM_OPT_HAS_FTM (1) /* @brief Number of FTM modules. */ #define FSL_FEATURE_SIM_OPT_FTM_COUNT (4) /* @brief Number of FTM triggers with selectable source. */ #define FSL_FEATURE_SIM_OPT_FTM_TRIGGER_COUNT (2) /* @brief Has FTM0 triggers source selection (register bits SOPT4[FTM0TRGnSRC], where n is a number). */ #define FSL_FEATURE_SIM_OPT_HAS_FTM0_TRIGGER (1) /* @brief Has FTM3 triggers source selection (register bits SOPT4[FTM3TRGnSRC], where n is a number). */ #define FSL_FEATURE_SIM_OPT_HAS_FTM3_TRIGGER (1) /* @brief Has FTM1 channel 0 input capture source selection (register bit SOPT4[FTM1CH0SRC]). */ #define FSL_FEATURE_SIM_OPT_HAS_FTM1_CHANNELS (1) /* @brief Has FTM2 channel 0 input capture source selection (register bit SOPT4[FTM2CH0SRC]). */ #define FSL_FEATURE_SIM_OPT_HAS_FTM2_CHANNELS (1) /* @brief Has FTM3 channel 0 input capture source selection (register bit SOPT4[FTM3CH0SRC]). */ #define FSL_FEATURE_SIM_OPT_HAS_FTM3_CHANNELS (0) /* @brief Has FTM2 channel 1 input capture source selection (register bit SOPT4[FTM2CH1SRC]). */ #define FSL_FEATURE_SIM_OPT_HAS_FTM2_CHANNEL1 (1) /* @brief Number of configurable FTM0 fault detection input (number of register bits SOPT4[FTM0FLTn], where n is a number starting from zero). */ #define FSL_FEATURE_SIM_OPT_FTM0_FAULT_COUNT (2) /* @brief Number of configurable FTM1 fault detection input (number of register bits SOPT4[FTM1FLTn], where n is a number starting from zero). */ #define FSL_FEATURE_SIM_OPT_FTM1_FAULT_COUNT (1) /* @brief Number of configurable FTM2 fault detection input (number of register bits SOPT4[FTM2FLTn], where n is a number starting from zero). */ #define FSL_FEATURE_SIM_OPT_FTM2_FAULT_COUNT (1) /* @brief Number of configurable FTM3 fault detection input (number of register bits SOPT4[FTM3FLTn], where n is a number starting from zero). */ #define FSL_FEATURE_SIM_OPT_FTM3_FAULT_COUNT (1) /* @brief Has FTM hardware trigger 0 software synchronization (register bit SOPT8[FTMnSYNCBIT], where n is a module instance index). */ #define FSL_FEATURE_SIM_OPT_HAS_FTM_TRIGGER_SYNC (1) /* @brief Has FTM channels output source selection (register bit SOPT8[FTMxOCHnSRC], where x is a module instance index and n is a channel index). */ #define FSL_FEATURE_SIM_OPT_HAS_FTM_CHANNELS_OUTPUT_SRC (1) /* @brief Has TPM module(s) configuration. */ #define FSL_FEATURE_SIM_OPT_HAS_TPM (1) /* @brief The highest TPM module index. */ #define FSL_FEATURE_SIM_OPT_MAX_TPM_INDEX (2) /* @brief Has TPM module with index 0. */ #define FSL_FEATURE_SIM_OPT_HAS_TPM0 (0) /* @brief Has TPM0 clock selection (register bit field SOPT4[TPM0CLKSEL]). */ #define FSL_FEATURE_SIM_OPT_HAS_TPM0_CLK_SEL (0) /* @brief Is TPM channels configuration in the SOPT4 (not SOPT9) register (register bits TPMnCH0SRC, TPMnCLKSEL, where n is a module instance index). */ #define FSL_FEATURE_SIM_OPT_HAS_TPM_CHANNELS_CONFIG_IN_SOPT4_REG (0) /* @brief Has TPM1 channel 0 input capture source selection (register bit field SOPT4[TPM1CH0SRC] or SOPT9[TPM1CH0SRC]). */ #define FSL_FEATURE_SIM_OPT_HAS_TPM1_CH0_SRC_SELECTION (1) /* @brief Has TPM1 clock selection (register bit field SOPT4[TPM1CLKSEL]). */ #define FSL_FEATURE_SIM_OPT_HAS_TPM1_CLK_SEL (0) /* @brief TPM1 channel 0 input capture source selection width (width of register bit field SOPT4[TPM1CH0SRC] or SOPT9[TPM1CH0SRC]). */ #define FSL_FEATURE_SIM_OPT_TPM1_CH0_SRC_SELECTION_WIDTH (1) /* @brief Has TPM2 channel 0 input capture source selection (register bit field SOPT4[TPM2CH0SRC]). */ #define FSL_FEATURE_SIM_OPT_HAS_TPM2_CH0_SRC_SELECTION (0) /* @brief Has TPM2 clock selection (register bit field SOPT4[TPM2CLKSEL]). */ #define FSL_FEATURE_SIM_OPT_HAS_TPM2_CLK_SEL (0) /* @brief Has PLL/FLL clock selection (register bit field SOPT2[PLLFLLSEL]). */ #define FSL_FEATURE_SIM_OPT_HAS_PLL_FLL_SELECTION (1) /* @brief PLL/FLL clock selection width (width of register bit field SOPT2[PLLFLLSEL]). */ #define FSL_FEATURE_SIM_OPT_PLL_FLL_SELECTION_WIDTH (1) /* @brief Has NFC clock source selection (register bit SOPT2[NFCSRC]). */ #define FSL_FEATURE_SIM_OPT_HAS_NFCSRC (0) /* @brief Has eSDHC clock source selection (register bit SOPT2[ESDHCSRC]). */ #define FSL_FEATURE_SIM_OPT_HAS_ESDHCSRC (0) /* @brief Has SDHC clock source selection (register bit SOPT2[SDHCSRC]). */ #define FSL_FEATURE_SIM_OPT_HAS_SDHCSRC (1) /* @brief Has LCDC clock source selection (register bits SOPT2[LCDCSRC], SOPT2[LCDC_CLKSEL]). */ #define FSL_FEATURE_SIM_OPT_HAS_LCDCSRC (0) /* @brief Has ENET timestamp clock source selection (register bit SOPT2[TIMESRC]). */ #define FSL_FEATURE_SIM_OPT_HAS_TIMESRC (0) /* @brief Has ENET RMII clock source selection (register bit SOPT2[RMIISRC]). */ #define FSL_FEATURE_SIM_OPT_HAS_RMIISRC (0) /* @brief Has USB clock source selection (register bit SOPT2[USBSRC]). */ #define FSL_FEATURE_SIM_OPT_HAS_USBSRC (1) /* @brief Has USB FS clock source selection (register bit SOPT2[USBFSRC]). */ #define FSL_FEATURE_SIM_OPT_HAS_USBFSRC (0) /* @brief Has USB HS clock source selection (register bit SOPT2[USBHSRC]). */ #define FSL_FEATURE_SIM_OPT_HAS_USBHSRC (0) /* @brief Has LPUART clock source selection (register bit SOPT2[LPUARTSRC]). */ #define FSL_FEATURE_SIM_OPT_HAS_LPUARTSRC (1) /* @brief Has LPUART0 clock source selection (register bit SOPT2[LPUART0SRC]). */ #define FSL_FEATURE_SIM_OPT_HAS_LPUART0SRC (0) /* @brief Has LPUART1 clock source selection (register bit SOPT2[LPUART1SRC]). */ #define FSL_FEATURE_SIM_OPT_HAS_LPUART1SRC (0) /* @brief Has FLEXIOSRC clock source selection (register bit SOPT2[FLEXIOSRC]). */ #define FSL_FEATURE_SIM_OPT_HAS_FLEXIOSRC (1) /* @brief Has UART0 clock source selection (register bit SOPT2[UART0SRC]). */ #define FSL_FEATURE_SIM_OPT_HAS_UART0SRC (0) /* @brief Has TPM clock source selection (register bit SOPT2[TPMSRC]). */ #define FSL_FEATURE_SIM_OPT_HAS_TPMSRC (1) /* @brief Has debug trace clock selection (register bit SOPT2[TRACECLKSEL]). */ #define FSL_FEATURE_SIM_OPT_HAS_TRACE_CLKSEL (1) /* @brief Number of ADC modules (register bits SOPT7[ADCnTRGSEL], SOPT7[ADCnPRETRGSEL], SOPT7[ADCnALTTRGSEL], where n is a module instance index). */ #define FSL_FEATURE_SIM_OPT_ADC_COUNT (1) /* @brief ADC0 alternate trigger enable width (width of bit field ADC0ALTTRGEN of register SOPT7). */ #define FSL_FEATURE_SIM_OPT_ADC0ALTTRGEN_WIDTH (1) /* @brief ADC1 alternate trigger enable width (width of bit field ADC1ALTTRGEN of register SOPT7). */ #define FSL_FEATURE_SIM_OPT_ADC1ALTTRGEN_WIDTH (0) /* @brief ADC2 alternate trigger enable width (width of bit field ADC2ALTTRGEN of register SOPT7). */ #define FSL_FEATURE_SIM_OPT_ADC2ALTTRGEN_WIDTH (0) /* @brief ADC3 alternate trigger enable width (width of bit field ADC3ALTTRGEN of register SOPT7). */ #define FSL_FEATURE_SIM_OPT_ADC3ALTTRGEN_WIDTH (0) /* @brief HSADC0 converter A alternate trigger enable width (width of bit field HSADC0AALTTRGEN of register SOPT7). */ #define FSL_FEATURE_SIM_OPT_HSADC0AALTTRGEN_WIDTH (0) /* @brief HSADC1 converter A alternate trigger enable width (width of bit field HSADC1AALTTRGEN of register SOPT7). */ #define FSL_FEATURE_SIM_OPT_HSADC1AALTTRGEN_WIDTH (0) /* @brief ADC converter A alternate trigger enable width (width of bit field ADCAALTTRGEN of register SOPT7). */ #define FSL_FEATURE_SIM_OPT_ADCAALTTRGEN_WIDTH (0) /* @brief HSADC0 converter B alternate trigger enable width (width of bit field HSADC0BALTTRGEN of register SOPT7). */ #define FSL_FEATURE_SIM_OPT_HSADC0BALTTRGEN_WIDTH (0) /* @brief HSADC1 converter B alternate trigger enable width (width of bit field HSADC1BALTTRGEN of register SOPT7). */ #define FSL_FEATURE_SIM_OPT_HSADC1BALTTRGEN_WIDTH (0) /* @brief ADC converter B alternate trigger enable width (width of bit field ADCBALTTRGEN of register SOPT7). */ #define FSL_FEATURE_SIM_OPT_ADCBALTTRGEN_WIDTH (0) /* @brief Has clock 2 output divider (register bit field CLKDIV1[OUTDIV2]). */ #define FSL_FEATURE_SIM_DIVIDER_HAS_OUTDIV2 (1) /* @brief Has clock 3 output divider (register bit field CLKDIV1[OUTDIV3]). */ #define FSL_FEATURE_SIM_DIVIDER_HAS_OUTDIV3 (1) /* @brief Has clock 4 output divider (register bit field CLKDIV1[OUTDIV4]). */ #define FSL_FEATURE_SIM_DIVIDER_HAS_OUTDIV4 (1) /* @brief Clock 4 output divider width (width of register bit field CLKDIV1[OUTDIV4]). */ #define FSL_FEATURE_SIM_DIVIDER_OUTDIV4_WIDTH (4) /* @brief Has clock 5 output divider (register bit field CLKDIV1[OUTDIV5]). */ #define FSL_FEATURE_SIM_DIVIDER_HAS_OUTDIV5 (0) /* @brief Has USB clock divider (register bit field CLKDIV2[USBDIV] and CLKDIV2[USBFRAC]). */ #define FSL_FEATURE_SIM_DIVIDER_HAS_USBDIV (1) /* @brief Has USB FS clock divider (register bit field CLKDIV2[USBFSDIV] and CLKDIV2[USBFSFRAC]). */ #define FSL_FEATURE_SIM_DIVIDER_HAS_USBFSDIV (0) /* @brief Has USB HS clock divider (register bit field CLKDIV2[USBHSDIV] and CLKDIV2[USBHSFRAC]). */ #define FSL_FEATURE_SIM_DIVIDER_HAS_USBHSDIV (0) /* @brief Has PLL/FLL clock divider (register bit field CLKDIV3[PLLFLLDIV] and CLKDIV3[PLLFLLFRAC]). */ #define FSL_FEATURE_SIM_DIVIDER_HAS_PLLFLLDIV (1) /* @brief Has LCDC clock divider (register bit field CLKDIV3[LCDCDIV] and CLKDIV3[LCDCFRAC]). */ #define FSL_FEATURE_SIM_DIVIDER_HAS_LCDCDIV (0) /* @brief Has trace clock divider (register bit field CLKDIV4[TRACEDIV] and CLKDIV4[TRACEFRAC]). */ #define FSL_FEATURE_SIM_DIVIDER_HAS_TRACEDIV (1) /* @brief Has NFC clock divider (register bit field CLKDIV4[NFCDIV] and CLKDIV4[NFCFRAC]). */ #define FSL_FEATURE_SIM_DIVIDER_HAS_NFCDIV (0) /* @brief Has Kinetis family ID (register bit field SDID[FAMILYID]). */ #define FSL_FEATURE_SIM_SDID_HAS_FAMILYID (1) /* @brief Has Kinetis family ID (register bit field SDID[FAMID]). */ #define FSL_FEATURE_SIM_SDID_HAS_FAMID (1) /* @brief Has Kinetis sub-family ID (register bit field SDID[SUBFAMID]). */ #define FSL_FEATURE_SIM_SDID_HAS_SUBFAMID (1) /* @brief Has Kinetis series ID (register bit field SDID[SERIESID]). */ #define FSL_FEATURE_SIM_SDID_HAS_SERIESID (1) /* @brief Has device die ID (register bit field SDID[DIEID]). */ #define FSL_FEATURE_SIM_SDID_HAS_DIEID (1) /* @brief Has system SRAM size specifier (register bit field SDID[SRAMSIZE]). */ #define FSL_FEATURE_SIM_SDID_HAS_SRAMSIZE (0) /* @brief Has flash mode (register bit FCFG1[FLASHDOZE]). */ #define FSL_FEATURE_SIM_FCFG_HAS_FLASHDOZE (1) /* @brief Has flash disable (register bit FCFG1[FLASHDIS]). */ #define FSL_FEATURE_SIM_FCFG_HAS_FLASHDIS (1) /* @brief Has FTFE disable (register bit FCFG1[FTFDIS]). */ #define FSL_FEATURE_SIM_FCFG_HAS_FTFDIS (0) /* @brief Has FlexNVM size specifier (register bit field FCFG1[NVMSIZE]). */ #define FSL_FEATURE_SIM_FCFG_HAS_NVMSIZE (0) /* @brief Has EEPROM size specifier (register bit field FCFG1[EESIZE]). */ #define FSL_FEATURE_SIM_FCFG_HAS_EESIZE (0) /* @brief Has FlexNVM partition (register bit field FCFG1[DEPART]). */ #define FSL_FEATURE_SIM_FCFG_HAS_DEPART (0) /* @brief Maximum flash address block 0 address specifier (register bit field FCFG2[MAXADDR0]). */ #define FSL_FEATURE_SIM_FCFG_HAS_MAXADDR0 (1) /* @brief Maximum flash address block 1 address specifier (register bit field FCFG2[MAXADDR1]). */ #define FSL_FEATURE_SIM_FCFG_HAS_MAXADDR1 (1) /* @brief Maximum flash address block 0 or 1 address specifier (register bit field FCFG2[MAXADDR01]). */ #define FSL_FEATURE_SIM_FCFG_HAS_MAXADDR01 (0) /* @brief Maximum flash address block 2 or 3 address specifier (register bit field FCFG2[MAXADDR23]). */ #define FSL_FEATURE_SIM_FCFG_HAS_MAXADDR23 (0) /* @brief Has program flash availability specifier (register bit FCFG2[PFLSH]). */ #define FSL_FEATURE_SIM_FCFG_HAS_PFLSH (0) /* @brief Has program flash swapping (register bit FCFG2[SWAPPFLSH]). */ #define FSL_FEATURE_SIM_FCFG_HAS_PFLSH_SWAP (0) /* @brief Has miscellanious control register (register MCR). */ #define FSL_FEATURE_SIM_HAS_MISC_CONTROLS (0) /* @brief Has COP watchdog (registers COPC and SRVCOP). */ #define FSL_FEATURE_SIM_HAS_COP_WATCHDOG (0) /* @brief Has COP watchdog stop (register bits COPC[COPSTPEN], COPC[COPDBGEN] and COPC[COPCLKSEL]). */ #define FSL_FEATURE_SIM_HAS_COP_STOP (0) /* @brief Has LLWU clock gate bit (e.g SIM_SCGC4). */ #define FSL_FEATURE_SIM_HAS_SCGC_LLWU (0) /* SMC module features */ /* @brief Has partial stop option (register bit STOPCTRL[PSTOPO]). */ #define FSL_FEATURE_SMC_HAS_PSTOPO (1) /* @brief Has LPO power option (register bit STOPCTRL[LPOPO]). */ #define FSL_FEATURE_SMC_HAS_LPOPO (1) /* @brief Has POR power option (register bit STOPCTRL[PORPO] or VLLSCTRL[PORPO]). */ #define FSL_FEATURE_SMC_HAS_PORPO (1) /* @brief Has low power wakeup on interrupt (register bit PMCTRL[LPWUI]). */ #define FSL_FEATURE_SMC_HAS_LPWUI (0) /* @brief Has LLS or VLLS mode control (register bit STOPCTRL[LLSM]). */ #define FSL_FEATURE_SMC_HAS_LLS_SUBMODE (1) /* @brief Has VLLS mode control (register bit VLLSCTRL[VLLSM]). */ #define FSL_FEATURE_SMC_USE_VLLSCTRL_REG (0) /* @brief Has VLLS mode control (register bit STOPCTRL[VLLSM]). */ #define FSL_FEATURE_SMC_USE_STOPCTRL_VLLSM (0) /* @brief Has RAM partition 2 power option (register bit STOPCTRL[RAM2PO]). */ #define FSL_FEATURE_SMC_HAS_RAM2_POWER_OPTION (1) /* @brief Has high speed run mode (register bit PMPROT[AHSRUN]). */ #define FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE (1) /* @brief Has low leakage stop mode (register bit PMPROT[ALLS]). */ #define FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE (1) /* @brief Has very low leakage stop mode (register bit PMPROT[AVLLS]). */ #define FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE (1) /* @brief Has stop submode. */ #define FSL_FEATURE_SMC_HAS_SUB_STOP_MODE (1) /* @brief Has stop submode 0(VLLS0). */ #define FSL_FEATURE_SMC_HAS_STOP_SUBMODE0 (1) /* @brief Has stop submode 1(VLLS1). */ #define FSL_FEATURE_SMC_HAS_STOP_SUBMODE1 (1) /* @brief Has stop submode 2(VLLS2). */ #define FSL_FEATURE_SMC_HAS_STOP_SUBMODE2 (1) /* @brief Has SMC_PARAM. */ #define FSL_FEATURE_SMC_HAS_PARAM (0) /* @brief Has SMC_VERID. */ #define FSL_FEATURE_SMC_HAS_VERID (0) /* @brief Has stop abort flag (register bit PMCTRL[STOPA]). */ #define FSL_FEATURE_SMC_HAS_PMCTRL_STOPA (1) /* @brief Has tamper reset (register bit SRS[TAMPER]). */ #define FSL_FEATURE_SMC_HAS_SRS_TAMPER (0) /* @brief Has security violation reset (register bit SRS[SECVIO]). */ #define FSL_FEATURE_SMC_HAS_SRS_SECVIO (0) /* DSPI module features */ /* @brief Receive/transmit FIFO size in number of items. */ #define FSL_FEATURE_DSPI_FIFO_SIZEn(x) \ ((x) == SPI0 ? (4) : \ ((x) == SPI1 ? (1) : \ ((x) == SPI2 ? (1) : (-1)))) /* @brief Maximum transfer data width in bits. */ #define FSL_FEATURE_DSPI_MAX_DATA_WIDTH (16) /* @brief Maximum number of chip select pins. (Reflects the width of register bit field PUSHR[PCS].) */ #define FSL_FEATURE_DSPI_MAX_CHIP_SELECT_COUNT (6) /* @brief Number of chip select pins. */ #define FSL_FEATURE_DSPI_CHIP_SELECT_COUNT (6) /* @brief Number of CTAR registers. */ #define FSL_FEATURE_DSPI_CTAR_COUNT (2) /* @brief Has chip select strobe capability on the PCS5 pin. */ #define FSL_FEATURE_DSPI_HAS_CHIP_SELECT_STROBE (1) /* @brief Has separated TXDATA and CMD FIFOs (register SREX). */ #define FSL_FEATURE_DSPI_HAS_SEPARATE_TXDATA_CMD_FIFO (0) /* @brief Has 16-bit data transfer support. */ #define FSL_FEATURE_DSPI_16BIT_TRANSFERS (1) /* @brief Has separate DMA RX and TX requests. */ #define FSL_FEATURE_DSPI_HAS_SEPARATE_DMA_RX_TX_REQn(x) (1) /* SYSMPU module features */ /* @brief Specifies number of descriptors available. */ #define FSL_FEATURE_SYSMPU_DESCRIPTOR_COUNT (12) /* @brief Has process identifier support. */ #define FSL_FEATURE_SYSMPU_HAS_PROCESS_IDENTIFIER (1) /* @brief Total number of MPU slave. */ #define FSL_FEATURE_SYSMPU_SLAVE_COUNT (5) /* @brief Total number of MPU master. */ #define FSL_FEATURE_SYSMPU_MASTER_COUNT (6) /* SysTick module features */ /* @brief Systick has external reference clock. */ #define FSL_FEATURE_SYSTICK_HAS_EXT_REF (0) /* @brief Systick external reference clock is core clock divided by this value. */ #define FSL_FEATURE_SYSTICK_EXT_REF_CORE_DIV (0) /* TPM module features */ /* @brief Bus clock is the source clock for the module. */ #define FSL_FEATURE_TPM_BUS_CLOCK (0) /* @brief Number of channels. */ #define FSL_FEATURE_TPM_CHANNEL_COUNTn(x) (2) /* @brief Has counter reset by the selected input capture event (register bits C0SC[ICRST], C1SC[ICRST], ...). */ #define FSL_FEATURE_TPM_HAS_COUNTER_RESET_BY_CAPTURE_EVENT (0) /* @brief Has TPM_PARAM. */ #define FSL_FEATURE_TPM_HAS_PARAM (0) /* @brief Has TPM_VERID. */ #define FSL_FEATURE_TPM_HAS_VERID (0) /* @brief Has TPM_GLOBAL. */ #define FSL_FEATURE_TPM_HAS_GLOBAL (0) /* @brief Has TPM_TRIG. */ #define FSL_FEATURE_TPM_HAS_TRIG (0) /* @brief Has counter pause on trigger. */ #define FSL_FEATURE_TPM_HAS_PAUSE_COUNTER_ON_TRIGGER (1) /* @brief Has external trigger selection. */ #define FSL_FEATURE_TPM_HAS_EXTERNAL_TRIGGER_SELECTION (1) /* @brief Has TPM_COMBINE register. */ #define FSL_FEATURE_TPM_HAS_COMBINE (1) /* @brief Whether COMBINE register has effect. */ #define FSL_FEATURE_TPM_COMBINE_HAS_EFFECTn(x) (1) /* @brief Has TPM_POL. */ #define FSL_FEATURE_TPM_HAS_POL (1) /* @brief Has TPM_FILTER register. */ #define FSL_FEATURE_TPM_HAS_FILTER (1) /* @brief Whether FILTER register has effect. */ #define FSL_FEATURE_TPM_FILTER_HAS_EFFECTn(x) (1) /* @brief Has TPM_QDCTRL register. */ #define FSL_FEATURE_TPM_HAS_QDCTRL (1) /* @brief Whether QDCTRL register has effect. */ #define FSL_FEATURE_TPM_QDCTRL_HAS_EFFECTn(x) (1) /* TSI module features */ /* @brief TSI module version. */ #define FSL_FEATURE_TSI_VERSION (4) /* @brief Has end-of-scan DMA transfer request enable (register bit GENCS[EOSDMEO]). */ #define FSL_FEATURE_TSI_HAS_END_OF_SCAN_DMA_ENABLE (1) /* @brief Number of TSI channels. */ #define FSL_FEATURE_TSI_CHANNEL_COUNT (16) /* USB module features */ /* @brief KHCI module instance count */ #define FSL_FEATURE_USB_KHCI_COUNT (1) /* @brief HOST mode enabled */ #define FSL_FEATURE_USB_KHCI_HOST_ENABLED (1) /* @brief OTG mode enabled */ #define FSL_FEATURE_USB_KHCI_OTG_ENABLED (1) /* @brief Size of the USB dedicated RAM */ #define FSL_FEATURE_USB_KHCI_USB_RAM (0) /* @brief Has KEEP_ALIVE_CTRL register */ #define FSL_FEATURE_USB_KHCI_KEEP_ALIVE_ENABLED (0) /* @brief Has the Dynamic SOF threshold compare support */ #define FSL_FEATURE_USB_KHCI_DYNAMIC_SOF_THRESHOLD_COMPARE_ENABLED (1) /* @brief Has the VBUS detect support */ #define FSL_FEATURE_USB_KHCI_VBUS_DETECT_ENABLED (1) /* @brief Has the IRC48M module clock support */ #define FSL_FEATURE_USB_KHCI_IRC48M_MODULE_CLOCK_ENABLED (1) /* @brief Number of endpoints supported */ #define FSL_FEATURE_USB_ENDPT_COUNT (16) /* @brief Has STALL_IL/OL_DIS registers */ #define FSL_FEATURE_USB_KHCI_HAS_STALL_LOW (0) /* @brief Has STALL_IH/OH_DIS registers */ #define FSL_FEATURE_USB_KHCI_HAS_STALL_HIGH (0) /* VREF module features */ /* @brief Has chop oscillator (bit TRM[CHOPEN]) */ #define FSL_FEATURE_VREF_HAS_CHOP_OSC (1) /* @brief Has second order curvature compensation (bit SC[ICOMPEN]) */ #define FSL_FEATURE_VREF_HAS_COMPENSATION (1) /* @brief If high/low buffer mode supported */ #define FSL_FEATURE_VREF_MODE_LV_TYPE (1) /* @brief Module has also low reference (registers VREFL/VREFH) */ #define FSL_FEATURE_VREF_HAS_LOW_REFERENCE (0) /* @brief Has VREF_TRM4. */ #define FSL_FEATURE_VREF_HAS_TRM4 (0) /* WDOG module features */ /* @brief Watchdog is available. */ #define FSL_FEATURE_WDOG_HAS_WATCHDOG (1) /* @brief Has Wait mode support. */ #define FSL_FEATURE_WDOG_HAS_WAITEN (1) #endif /* _MK82F25615_FEATURES_H_ */