/** ****************************************************************************** * @file stm32f3xx_hal_flash.h * @author MCD Application Team * @version V1.4.0 * @date 16-December-2016 * @brief Header file of Flash HAL module. ****************************************************************************** * @attention * *

© COPYRIGHT(c) 2016 STMicroelectronics

* * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F3xx_HAL_FLASH_H #define __STM32F3xx_HAL_FLASH_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f3xx_hal_def.h" /** @addtogroup STM32F3xx_HAL_Driver * @{ */ /** @addtogroup FLASH * @{ */ /** @addtogroup FLASH_Private_Constants * @{ */ #define FLASH_TIMEOUT_VALUE (50000U) /* 50 s */ /** * @} */ /** @addtogroup FLASH_Private_Macros * @{ */ #define IS_FLASH_TYPEPROGRAM(VALUE) (((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \ ((VALUE) == FLASH_TYPEPROGRAM_WORD) || \ ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD)) #define IS_FLASH_LATENCY(__LATENCY__) (((__LATENCY__) == FLASH_LATENCY_0) || \ ((__LATENCY__) == FLASH_LATENCY_1) || \ ((__LATENCY__) == FLASH_LATENCY_2)) /** * @} */ /* Exported types ------------------------------------------------------------*/ /** @defgroup FLASH_Exported_Types FLASH Exported Types * @{ */ /** * @brief FLASH Procedure structure definition */ typedef enum { FLASH_PROC_NONE = 0U, FLASH_PROC_PAGEERASE = 1U, FLASH_PROC_MASSERASE = 2U, FLASH_PROC_PROGRAMHALFWORD = 3U, FLASH_PROC_PROGRAMWORD = 4U, FLASH_PROC_PROGRAMDOUBLEWORD = 5U } FLASH_ProcedureTypeDef; /** * @brief FLASH handle Structure definition */ typedef struct { __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*!< Internal variable to indicate which procedure is ongoing or not in IT context */ __IO uint32_t DataRemaining; /*!< Internal variable to save the remaining pages to erase or half-word to program in IT context */ __IO uint32_t Address; /*!< Internal variable to save address selected for program or erase */ __IO uint64_t Data; /*!< Internal variable to save data to be programmed */ HAL_LockTypeDef Lock; /*!< FLASH locking object */ __IO uint32_t ErrorCode; /*!< FLASH error code This parameter can be a value of @ref FLASH_Error_Codes */ } FLASH_ProcessTypeDef; /** * @} */ /* Exported constants --------------------------------------------------------*/ /** @defgroup FLASH_Exported_Constants FLASH Exported Constants * @{ */ /** @defgroup FLASH_Error_Codes FLASH Error Codes * @{ */ #define HAL_FLASH_ERROR_NONE 0x00U /*!< No error */ #define HAL_FLASH_ERROR_PROG 0x01U /*!< Programming error */ #define HAL_FLASH_ERROR_WRP 0x02U /*!< Write protection error */ /** * @} */ /** @defgroup FLASH_Type_Program FLASH Type Program * @{ */ #define FLASH_TYPEPROGRAM_HALFWORD (0x01U) /*!ACR |= FLASH_ACR_HLFCYA) /** * @brief Disable the FLASH half cycle access. * @retval None */ #define __HAL_FLASH_HALF_CYCLE_ACCESS_DISABLE() (FLASH->ACR &= (~FLASH_ACR_HLFCYA)) /** * @} */ /** @defgroup FLASH_EM_Latency FLASH Latency * @brief macros to handle FLASH Latency * @{ */ /** * @brief Set the FLASH Latency. * @param __LATENCY__ FLASH Latency * This parameter can be one of the following values: * @arg @ref FLASH_LATENCY_0 FLASH Zero Latency cycle * @arg @ref FLASH_LATENCY_1 FLASH One Latency cycle * @arg @ref FLASH_LATENCY_2 FLASH Two Latency cycles * @retval None */ #define __HAL_FLASH_SET_LATENCY(__LATENCY__) (FLASH->ACR = (FLASH->ACR&(~FLASH_ACR_LATENCY)) | (__LATENCY__)) /** * @brief Get the FLASH Latency. * @retval FLASH Latency * This parameter can be one of the following values: * @arg @ref FLASH_LATENCY_0 FLASH Zero Latency cycle * @arg @ref FLASH_LATENCY_1 FLASH One Latency cycle * @arg @ref FLASH_LATENCY_2 FLASH Two Latency cycles */ #define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY)) /** * @} */ /** @defgroup FLASH_Prefetch FLASH Prefetch * @brief macros to handle FLASH Prefetch buffer * @{ */ /** * @brief Enable the FLASH prefetch buffer. * @retval None */ #define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTBE) /** * @brief Disable the FLASH prefetch buffer. * @retval None */ #define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTBE)) /** * @} */ /** @defgroup FLASH_Interrupt FLASH Interrupts * @brief macros to handle FLASH interrupts * @{ */ /** * @brief Enable the specified FLASH interrupt. * @param __INTERRUPT__ FLASH interrupt * This parameter can be any combination of the following values: * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt * @arg @ref FLASH_IT_ERR Error Interrupt * @retval none */ #define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) SET_BIT((FLASH->CR), (__INTERRUPT__)) /** * @brief Disable the specified FLASH interrupt. * @param __INTERRUPT__ FLASH interrupt * This parameter can be any combination of the following values: * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt * @arg @ref FLASH_IT_ERR Error Interrupt * @retval none */ #define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) CLEAR_BIT((FLASH->CR), (uint32_t)(__INTERRUPT__)) /** * @brief Get the specified FLASH flag status. * @param __FLAG__ specifies the FLASH flag to check. * This parameter can be one of the following values: * @arg @ref FLASH_FLAG_BSY FLASH Busy flag * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag * @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag * @arg @ref FLASH_FLAG_PGERR FLASH Programming error flag * @retval The new state of __FLAG__ (SET or RESET). */ #define __HAL_FLASH_GET_FLAG(__FLAG__) (((FLASH->SR) & (__FLAG__)) == (__FLAG__)) /** * @brief Clear the specified FLASH flag. * @param __FLAG__ specifies the FLASH flags to clear. * This parameter can be any combination of the following values: * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag * @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag * @arg @ref FLASH_FLAG_PGERR FLASH Programming error flag * @retval none */ #define __HAL_FLASH_CLEAR_FLAG(__FLAG__) ((FLASH->SR) = (__FLAG__)) /** * @} */ /** * @} */ /* Include FLASH HAL Extended module */ #include "stm32f3xx_hal_flash_ex.h" /* Exported functions --------------------------------------------------------*/ /** @addtogroup FLASH_Exported_Functions * @{ */ /** @addtogroup FLASH_Exported_Functions_Group1 * @{ */ /* IO operation functions *****************************************************/ HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data); HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data); /* FLASH IRQ handler function */ void HAL_FLASH_IRQHandler(void); /* Callbacks in non blocking modes */ void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue); void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); /** * @} */ /** @addtogroup FLASH_Exported_Functions_Group2 * @{ */ /* Peripheral Control functions ***********************************************/ HAL_StatusTypeDef HAL_FLASH_Unlock(void); HAL_StatusTypeDef HAL_FLASH_Lock(void); HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void); HAL_StatusTypeDef HAL_FLASH_OB_Lock(void); HAL_StatusTypeDef HAL_FLASH_OB_Launch(void); /** * @} */ /** @addtogroup FLASH_Exported_Functions_Group3 * @{ */ /* Peripheral State and Error functions ***************************************/ uint32_t HAL_FLASH_GetError(void); /** * @} */ /** * @} */ /* Private function -------------------------------------------------*/ /** @addtogroup FLASH_Private_Functions * @{ */ HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); /** * @} */ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32F3xx_HAL_FLASH_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/