/*
 * Copyright 2018 NXP
 * All rights reserved.
 *
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#include "fsl_puf.h"
#include "fsl_clock.h"
#include "fsl_reset.h"
#include "fsl_common.h"

static void puf_wait_usec(uint32_t usec, uint32_t coreClockFrequencyMHz)
{
    while (usec > 0)
    {
        usec--;

        /* number of MHz is directly number of core clocks to wait 1 usec. */
        /* the while loop below is actually 4 clocks so divide by 4 for ~1 usec */
        register uint32_t ticksCount = coreClockFrequencyMHz / 4u + 1u;
        while (ticksCount--)
        {
        }
    }
}

static status_t puf_waitForInit(PUF_Type *base)
{
    status_t status = kStatus_Fail;

    /* wait until status register reads non-zero. All zero is not valid. It should be BUSY or OK or ERROR */
    while (0 == base->STAT)
    {
    }

    /* wait if busy */
    while ((base->STAT & PUF_STAT_BUSY_MASK) != 0)
    {
    }

    /* return status */
    if (base->STAT & (PUF_STAT_SUCCESS_MASK | PUF_STAT_ERROR_MASK))
    {
        status = kStatus_Success;
    }

    return status;
}

static void puf_powerOn(PUF_Type *base)
{
#if defined(FSL_FEATURE_PUF_PWR_HAS_MANUAL_SLEEP_CONTROL) && (FSL_FEATURE_PUF_PWR_HAS_MANUAL_SLEEP_CONTROL > 0)
    /* RT6xxs */
    base->PWRCTRL = 0x5u;
    base->PWRCTRL = 0xDu;
    base->PWRCTRL = 0x9u;
#else  /* !FSL_FEATURE_PUF_PWR_HAS_MANUAL_SLEEP_CONTROL */
    /* Niobe4 & Aruba FL */
    base->PWRCTRL = PUF_PWRCTRL_RAMON_MASK;
    while (0 == (PUF_PWRCTRL_RAMSTAT_MASK & base->PWRCTRL))
    {
    }
#endif /* FSL_FEATURE_PUF_PWR_HAS_MANUAL_SLEEP_CONTROL */
}

static status_t puf_powerCycle(PUF_Type *base, uint32_t dischargeTimeMsec, uint32_t coreClockFrequencyHz)
{
#if defined(FSL_FEATURE_PUF_PWR_HAS_MANUAL_SLEEP_CONTROL) && (FSL_FEATURE_PUF_PWR_HAS_MANUAL_SLEEP_CONTROL > 0)
    /* RT6xxs */
    uint32_t coreClockFrequencyMHz = coreClockFrequencyHz / 1000000u;

    base->PWRCTRL = 0xDu; /* disable RAM CK */

    /* enter ASPS mode */
    base->PWRCTRL = 0xCu;  /* SLEEP = 1 */
    base->PWRCTRL = 0x8u;  /* enable RAM CK */
    base->PWRCTRL = 0xF8u; /* SLEEP=1, PSW*=1 */

    /* Wait enough time to discharge fully */
    puf_wait_usec(dischargeTimeMsec * 1000u, coreClockFrequencyHz / 1000000u);

    /* write PWRCTRL=0x38. wait time > 1 us */
    base->PWRCTRL = 0x38u; /* SLEEP=1. PSWSMALL*=0. PSWLARGE*=1. */
    puf_wait_usec(1, coreClockFrequencyMHz);

    /* write PWRCTRL=0x8. wait time > 1 us */
    base->PWRCTRL = 0x08u; /* SLEEP=1. PSWSMALL*=0. PSWLARGE*=0 */
    puf_wait_usec(1, coreClockFrequencyMHz);

    base->PWRCTRL = 0xCu;
    base->PWRCTRL = 0xDu;
    base->PWRCTRL = 0x9u;

    /* Generate INITN low pulse */
    base->PWRCTRL = 0xDu;
    base->PWRCTRL = 0x5u;
    base->PWRCTRL = 0x1u;
#else
    /* Niobe4 & Aruba FL */
    base->PWRCTRL = 0x0u;
    while (PUF_PWRCTRL_RAMSTAT_MASK & base->PWRCTRL)
    {
    }

    /* Wait enough time to discharge fully */
    puf_wait_usec(dischargeTimeMsec * 1000u, coreClockFrequencyHz / 1000000u);
#endif

    /* Reset PUF and reenable power to PUF SRAM */
    RESET_PeripheralReset(kPUF_RST_SHIFT_RSTn);
    puf_powerOn(base);

    return kStatus_Success;
}

/*!
 * brief Initialize PUF
 *
 * This function enables power to PUF block and waits until the block initializes.
 *
 * param base PUF peripheral base address
 * param dischargeTimeMsec time in ms to wait for PUF SRAM to fully discharge
 * param coreClockFrequencyHz core clock frequency in Hz
 * return Status of the init operation
 */
status_t PUF_Init(PUF_Type *base, uint32_t dischargeTimeMsec, uint32_t coreClockFrequencyHz)
{
    status_t status = kStatus_Fail;

#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
    CLOCK_EnableClock(kCLOCK_Puf);
#endif
    /* Reset PUF */
    RESET_PeripheralReset(kPUF_RST_SHIFT_RSTn);

    /* Enable power to PUF SRAM */
    puf_powerOn(base);

    /* Wait for peripheral to become ready */
    status = puf_waitForInit(base);

    /* In case of error or enroll & start not allowed, do power-cycle */
    if ((status != kStatus_Success) || ((PUF_ALLOW_ALLOWENROLL_MASK | PUF_ALLOW_ALLOWSTART_MASK) !=
                                        (base->ALLOW & (PUF_ALLOW_ALLOWENROLL_MASK | PUF_ALLOW_ALLOWSTART_MASK))))
    {
        puf_powerCycle(base, dischargeTimeMsec, coreClockFrequencyHz);
        status = puf_waitForInit(base);
    }

    return status;
}

/*!
 * brief Denitialize PUF
 *
 * This function disables power to PUF SRAM and peripheral clock.
 *
 * param base PUF peripheral base address
 */
void PUF_Deinit(PUF_Type *base, uint32_t dischargeTimeMsec, uint32_t coreClockFrequencyHz)
{
#if defined(FSL_FEATURE_PUF_PWR_HAS_MANUAL_SLEEP_CONTROL) && (FSL_FEATURE_PUF_PWR_HAS_MANUAL_SLEEP_CONTROL > 0)
    /* RT6xxs */
    base->PWRCTRL = 0xDu; /* disable RAM CK */

    /* enter ASPS mode */
    base->PWRCTRL = 0xCu;  /* SLEEP = 1 */
    base->PWRCTRL = 0x8u;  /* enable RAM CK */
    base->PWRCTRL = 0xF8u; /* SLEEP=1, PSW*=1 */
#else /* !FSL_FEATURE_PUF_PWR_HAS_MANUAL_SLEEP_CONTROL */
    /* Niobe4 & Aruba FL */
    base->PWRCTRL = 0x00u;
#endif

    /* Wait enough time to discharge fully */
    puf_wait_usec(dischargeTimeMsec * 1000u, coreClockFrequencyHz / 1000000u);

    RESET_SetPeripheralReset(kPUF_RST_SHIFT_RSTn);

#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
    CLOCK_DisableClock(kCLOCK_Puf);
#endif
}

/*!
 * brief Enroll PUF
 *
 * This function derives a digital fingerprint, generates the corresponding Activation Code (AC)
 * and returns it to be stored in an NVM or a file. This step needs to be
 * performed only once for each device. This function may be permanently disallowed by a fuse.
 *
 * param base PUF peripheral base address
 * param[out] activationCode Word aligned address of the resulting activation code.
 * param activationCodeSize Size of the activationCode buffer in bytes. Shall be 1192 bytes.
 * return Status of enroll operation.
 */
status_t PUF_Enroll(PUF_Type *base, uint8_t *activationCode, size_t activationCodeSize)
{
    status_t status = kStatus_Fail;
    uint32_t *activationCodeAligned = NULL;
    register uint32_t temp32 = 0;

    /* check that activation code buffer size is at least 1192 bytes */
    if (activationCodeSize < PUF_ACTIVATION_CODE_SIZE)
    {
        return kStatus_InvalidArgument;
    }

    /* only work with aligned activationCode */
    if (0x3u & (uintptr_t)activationCode)
    {
        return kStatus_InvalidArgument;
    }

    activationCodeAligned = (uint32_t *)(uintptr_t)activationCode;

    /* check if ENROLL is allowed */
    if (0x0u == (base->ALLOW & PUF_ALLOW_ALLOWENROLL_MASK))
    {
        return kStatus_Fail;
    }

    /* write PUF Enroll command */
    base->CTRL = PUF_CTRL_ENROLL_MASK;

    /* check status */
    while (0 == (base->STAT & (PUF_STAT_BUSY_MASK | PUF_STAT_ERROR_MASK)))
    {
    }

    /* read out AC */
    while (0 != (base->STAT & PUF_STAT_BUSY_MASK))
    {
        if (0 != (PUF_STAT_CODEOUTAVAIL_MASK & base->STAT))
        {
            temp32 = base->CODEOUTPUT;
            if (activationCodeSize >= sizeof(uint32_t))
            {
                *activationCodeAligned = temp32;
                activationCodeAligned++;
                activationCodeSize -= sizeof(uint32_t);
            }
        }
    }

    if ((base->STAT & PUF_STAT_SUCCESS_MASK) && (activationCodeSize == 0))
    {
        status = kStatus_Success;
    }

    return status;
}

/*!
 * brief Start PUF
 *
 * The Activation Code generated during the Enroll operation is used to
 * reconstruct the digital fingerprint. This needs to be done after every power-up
 * and reset.
 *
 * param base PUF peripheral base address
 * param activationCode Word aligned address of the input activation code.
 * param activationCodeSize Size of the activationCode buffer in bytes. Shall be 1192 bytes.
 * return Status of start operation.
 */
status_t PUF_Start(PUF_Type *base, const uint8_t *activationCode, size_t activationCodeSize)
{
    status_t status = kStatus_Fail;
    const uint32_t *activationCodeAligned = NULL;
    register uint32_t temp32 = 0;

    /* check that activation code size is at least 1192 bytes */
    if (activationCodeSize < 1192)
    {
        return kStatus_InvalidArgument;
    }

    /* only work with aligned activationCode */
    if (0x3u & (uintptr_t)activationCode)
    {
        return kStatus_InvalidArgument;
    }

    activationCodeAligned = (const uint32_t *)(uintptr_t)activationCode;

    /* check if START is allowed */
    if (0x0u == (base->ALLOW & PUF_ALLOW_ALLOWSTART_MASK))
    {
        return kStatus_Fail;
    }

    /* run PUF Start command */
    base->CTRL = PUF_CTRL_START_MASK;

    /* check status */
    while (0 == (base->STAT & (PUF_STAT_BUSY_MASK | PUF_STAT_ERROR_MASK)))
    {
    }

    /* while busy send AC */
    while (0 != (base->STAT & PUF_STAT_BUSY_MASK))
    {
        if (0 != (PUF_STAT_CODEINREQ_MASK & base->STAT))
        {
            if (activationCodeSize >= sizeof(uint32_t))
            {
                temp32 = *activationCodeAligned;
                activationCodeAligned++;
                activationCodeSize -= sizeof(uint32_t);
            }
            base->CODEINPUT = temp32;
        }
    }

    /* get status */
    if (0 != (base->STAT & PUF_STAT_SUCCESS_MASK))
    {
        status = kStatus_Success;
    }

    return status;
}

/*!
 * brief Set intrinsic key
 *
 * The digital fingerprint generated during the Enroll/Start
 * operations is used to generate a Key Code (KC) that defines a unique intrinsic
 * key. This KC is returned to be stored in an NVM or a file. This operation
 * needs to be done only once for each intrinsic key.
 * Each time a Set Intrinsic Key operation is executed a new unique key is
 * generated.
 *
 * param base PUF peripheral base address
 * param keyIndex PUF key index register
 * param keySize Size of the intrinsic key to generate in bytes.
 * param[out] keyCode Word aligned address of the resulting key code.
 * param keyCodeSize Size of the keyCode buffer in bytes. Shall be PUF_GET_KEY_CODE_SIZE_FOR_KEY_SIZE(keySize).
 * return Status of set intrinsic key operation.
 */
status_t PUF_SetIntrinsicKey(
    PUF_Type *base, puf_key_index_register_t keyIndex, size_t keySize, uint8_t *keyCode, size_t keyCodeSize)
{
    status_t status = kStatus_Fail;
    uint32_t *keyCodeAligned = NULL;
    register uint32_t temp32 = 0;

    /* check if SET KEY is allowed */
    if (0x0u == (base->ALLOW & PUF_ALLOW_ALLOWSETKEY_MASK))
    {
        return kStatus_Fail;
    }

    /* only work with aligned keyCode */
    if (0x3u & (uintptr_t)keyCode)
    {
        return kStatus_InvalidArgument;
    }

    /* Check that keySize is in the correct range and that it is multiple of 8 */
    if ((keySize < kPUF_KeySizeMin) || (keySize > kPUF_KeySizeMax) || (keySize & 0x7))
    {
        return kStatus_InvalidArgument;
    }

    /* check that keyCodeSize is correct for given keySize */
    if (keyCodeSize < PUF_GET_KEY_CODE_SIZE_FOR_KEY_SIZE(keySize))
    {
        return kStatus_InvalidArgument;
    }

    if ((uint32_t)keyIndex > kPUF_KeyIndexMax)
    {
        return kStatus_InvalidArgument;
    }

    keyCodeAligned = (uint32_t *)(uintptr_t)keyCode;

    /* program the key size and index */
    base->KEYSIZE = keySize >> 3;
    base->KEYINDEX = (uint32_t)keyIndex;

    /* start generate key command  */
    base->CTRL = PUF_CTRL_GENERATEKEY_MASK;

    /* wait till command is accepted */
    while (0 == (base->STAT & (PUF_STAT_BUSY_MASK | PUF_STAT_ERROR_MASK)))
    {
    }

    /* while busy read KC */
    while (0 != (base->STAT & PUF_STAT_BUSY_MASK))
    {
        if (0 != (PUF_STAT_CODEOUTAVAIL_MASK & base->STAT))
        {
            temp32 = base->CODEOUTPUT;
            if (keyCodeSize >= sizeof(uint32_t))
            {
                *keyCodeAligned = temp32;
                keyCodeAligned++;
                keyCodeSize -= sizeof(uint32_t);
            }
        }
    }

    /* get status */
    if (0 != (base->STAT & PUF_STAT_SUCCESS_MASK))
    {
        status = kStatus_Success;
    }

    return status;
}

/*!
 * brief Set user key
 *
 * The digital fingerprint generated during the Enroll/Start
 * operations and a user key (UK) provided as input are used to
 * generate a Key Code (KC). This KC is sent returned to be stored
 * in an NVM or a file. This operation needs to be done only once for each user key.
 *
 * param base PUF peripheral base address
 * param keyIndex PUF key index register
 * param userKey Word aligned address of input user key.
 * param userKeySize Size of the input user key in bytes.
 * param[out] keyCode Word aligned address of the resulting key code.
 * param keyCodeSize Size of the keyCode buffer in bytes. Shall be PUF_GET_KEY_CODE_SIZE_FOR_KEY_SIZE(userKeySize).
 * return Status of set user key operation.
 */
status_t PUF_SetUserKey(PUF_Type *base,
                        puf_key_index_register_t keyIndex,
                        const uint8_t *userKey,
                        size_t userKeySize,
                        uint8_t *keyCode,
                        size_t keyCodeSize)
{
    status_t status = kStatus_Fail;
    uint32_t *keyCodeAligned = NULL;
    const uint32_t *userKeyAligned = NULL;  // RK why const?
    register uint32_t temp32 = 0;

    /* check if SET KEY is allowed */
    if (0x0u == (base->ALLOW & PUF_ALLOW_ALLOWSETKEY_MASK))
    {
        return kStatus_Fail;
    }

    /* only work with aligned keyCode */
    if (0x3u & (uintptr_t)keyCode)
    {
        return kStatus_InvalidArgument;
    }

    /* Check that userKeySize is in the correct range and that it is multiple of 8 */
    if ((userKeySize < kPUF_KeySizeMin) || (userKeySize > kPUF_KeySizeMax) || (userKeySize & 0x7))
    {
        return kStatus_InvalidArgument;
    }

    /* check that keyCodeSize is correct for given userKeySize */
    if (keyCodeSize < PUF_GET_KEY_CODE_SIZE_FOR_KEY_SIZE(userKeySize))
    {
        return kStatus_InvalidArgument;
    }

    if ((uint32_t)keyIndex > kPUF_KeyIndexMax)
    {
        return kStatus_InvalidArgument;
    }

    keyCodeAligned = (uint32_t *)(uintptr_t)keyCode;
    userKeyAligned = (const uint32_t *)(uintptr_t)userKey;

    /* program the key size and index */
    base->KEYSIZE = userKeySize >> 3; /* convert to 64-bit blocks */
    base->KEYINDEX = (uint32_t)keyIndex;

    /*if key index 0 - to be sent to AES, PRINCE, change endianess and */
    if (keyIndex == 0)
    {
        uint32_t * pa = (uint32_t *)userKeyAligned;
        uint32_t * pd = (uint32_t *)(&userKeyAligned[userKeySize >> 2]-1);
        uint32_t i;
    for(i = 0; i < (userKeySize >> 3); i++)
    {
        temp32 = *pa;
        *pa++ = swap_bytes(*pd);
        *pd-- = swap_bytes(temp32);
    }
      
    }
    /* begin */
    base->CTRL = PUF_CTRL_SETKEY_MASK;

    /* wait till command is accepted */
    while (0 == (base->STAT & (PUF_STAT_BUSY_MASK | PUF_STAT_ERROR_MASK)))
    {
    }

    /* while busy write UK and read KC */
    while (0 != (base->STAT & PUF_STAT_BUSY_MASK))
    {
        if (0 != (PUF_STAT_KEYINREQ_MASK & base->STAT))
        {
            if (userKeySize >= sizeof(uint32_t))
            {
                temp32 = *userKeyAligned;
                userKeyAligned++;
                userKeySize -= sizeof(uint32_t);
            }
            base->KEYINPUT = temp32;
        }

        if (0 != (PUF_STAT_CODEOUTAVAIL_MASK & base->STAT))
        {
            temp32 = base->CODEOUTPUT;
            if (keyCodeSize >= sizeof(uint32_t))
            {
                *keyCodeAligned = temp32;
                keyCodeAligned++;
                keyCodeSize -= sizeof(uint32_t);
            }
        }
    }

    /* get status */
    if (0 != (base->STAT & PUF_STAT_SUCCESS_MASK))
    {
        status = kStatus_Success;
    }

    return status;
}

static status_t puf_getHwKey(PUF_Type *base, const uint8_t *keyCode, size_t keyCodeSize)
{
    status_t status = kStatus_Fail;
    uint32_t *keyCodeAligned = NULL;
    register uint32_t temp32 = 0;

    keyCodeAligned = (uint32_t *)(uintptr_t)keyCode;

    /* begin */
    base->CTRL = PUF_CTRL_GETKEY_MASK;

    /* wait till command is accepted */
    while (0 == (base->STAT & (PUF_STAT_BUSY_MASK | PUF_STAT_ERROR_MASK)))
    {
    }

    /* while busy send KC, key is reconstructed to HW bus */
    while (0 != (base->STAT & PUF_STAT_BUSY_MASK))
    {
        if (0 != (PUF_STAT_CODEINREQ_MASK & base->STAT))
        {
            if (keyCodeSize >= sizeof(uint32_t))
            {
                temp32 = *keyCodeAligned;
                keyCodeAligned++;
                keyCodeSize -= sizeof(uint32_t);
            }
            base->CODEINPUT = temp32;
        }
    }

    /* get status */
    if (0 != (base->STAT & PUF_STAT_SUCCESS_MASK))
    {
        status = kStatus_Success;
    }

    return status;
}

/*!
 * brief Reconstruct hw bus key from a key code
 *
 * The digital fingerprint generated during the Start operation and the KC
 * generated during a Set Key operation (Set intrinsic key or Set user key) are used to retrieve a stored key. This
 * operation needs to be done every time a key is needed.
 * This function accepts only Key Codes created for PUF index register kPUF_KeyIndex_00.
 * Such a key is output directly to a dedicated hardware bus. The reconstructed key is not exposed to system memory.
 *
 * param base PUF peripheral base address
 * param keyCode Word aligned address of the input key code.
 * param keyCodeSize Size of the keyCode buffer in bytes. Shall be PUF_GET_KEY_CODE_SIZE_FOR_KEY_SIZE(keySize).
 * param keySlot key slot to output on hw bus. Parameter is ignored on devices with less than two key slots.
 * param keyMask key masking value. Shall be random for each POR/reset. Value does not have to be cryptographicaly
 * secure.
 * return Status of get key operation.
 */
status_t PUF_GetHwKey(
    PUF_Type *base, const uint8_t *keyCode, size_t keyCodeSize, puf_key_slot_t keySlot, uint32_t keyMask)
{
    status_t status = kStatus_Fail;
    uint32_t keyIndex;

    /* check if GET KEY is allowed */
    if (0x0u == (base->ALLOW & PUF_ALLOW_ALLOWGETKEY_MASK))
    {
        return kStatus_Fail;
    }

    /* only work with aligned keyCode */
    if (0x3u & (uintptr_t)keyCode)
    {
        return kStatus_Fail;
    }

    /* check that keyCodeSize is at least PUF_MIN_KEY_CODE_SIZE */
    if (keyCodeSize < PUF_MIN_KEY_CODE_SIZE)
    {
        return kStatus_InvalidArgument;
    }

    keyIndex = 0x0Fu & keyCode[1];

    /* check the Key Code header byte 1. index must be zero for the hw key. */
    if (kPUF_KeyIndex_00 != (puf_key_index_register_t)keyIndex)
    {
        return kStatus_Fail;
    }

#if defined(FSL_FEATURE_PUF_HAS_KEYSLOTS) && (FSL_FEATURE_PUF_HAS_KEYSLOTS > 0)
    //volatile uint32_t *keyMask_reg = NULL;
#define PUF_KEYSLOT_EN 2
    uint32_t regVal = (PUF_KEYSLOT_EN << (2 * keySlot));

     if (keySlot >= FSL_FEATURE_PUF_HAS_KEYSLOTS)
    {
        return kStatus_InvalidArgument;
    }

#endif /* FSL_FEATURE_PUF_HAS_KEYSLOTS */


#if defined(FSL_FEATURE_PUF_HAS_KEYSLOTS) && (FSL_FEATURE_PUF_HAS_KEYSLOTS > 0)
        base->KEYRESET = regVal;
        base->KEYENABLE = regVal;
        base->KEYMASK[keySlot] = keyMask;
#endif /* FSL_FEATURE_PUF_HAS_KEYSLOTS */

        status = puf_getHwKey(base, keyCode, keyCodeSize);

#if defined(FSL_FEATURE_PUF_HAS_SHIFT_STATUS) && (FSL_FEATURE_PUF_HAS_SHIFT_STATUS > 0)
        size_t keyWords = 0;

        if (status == kStatus_Success)
        {
            /* if the corresponding shift count does not match, return fail anyway */
            keyWords = ((((size_t)keyCode[3]) * 2) - 1u) << (keySlot << 2);
            if (keyWords != ((0x0Fu << (keySlot << 2)) & base->SHIFT_STATUS))
            {
                status = kStatus_Fail;
            }
        }
#endif /* FSL_FEATURE_PUF_HAS_SHIFT_STATUS */


    return status;
}

/*!
 * brief Checks if Get Key operation is allowed.
 *
 * This function returns true if get key operation is allowed.
 *
 * param base PUF peripheral base address
 * return true if get key operation is allowed
 */
bool PUF_IsGetKeyAllowed(PUF_Type *base)
{
    /* check if GET KEY is allowed */
    if (0x0u == (base->ALLOW & PUF_ALLOW_ALLOWGETKEY_MASK))
    {
        return false;
    }

    return true;
}

/*!
 * brief Reconstruct key from a key code
 *
 * The digital fingerprint generated during the Start operation and the KC
 * generated during a Set Key operation (Set intrinsic key or Set user key) are used to retrieve a stored key. This
 * operation needs to be done every time a key is needed.
 * This function accepts only Key Codes created for PUF index registers kPUF_KeyIndex_01 to kPUF_KeyIndex_15.
 *
 * param base PUF peripheral base address
 * param keyCode Word aligned address of the input key code.
 * param keyCodeSize Size of the keyCode buffer in bytes. Shall be PUF_GET_KEY_CODE_SIZE_FOR_KEY_SIZE(keySize).
 * param[out] key Word aligned address of output key.
 * param keySize Size of the output key in bytes.
 * return Status of get key operation.
 */
status_t PUF_GetKey(PUF_Type *base, const uint8_t *keyCode, size_t keyCodeSize, uint8_t *key, size_t keySize)
{
    status_t status = kStatus_Fail;
    uint32_t *keyCodeAligned = NULL;
    uint32_t *keyAligned = NULL;
    uint32_t keyIndex;
    register uint32_t temp32 = 0;

    /* check if GET KEY is allowed */
    if (0x0u == (base->ALLOW & PUF_ALLOW_ALLOWGETKEY_MASK))
    {
        return kStatus_Fail;
    }

    /* only work with aligned keyCode */
    if (0x3u & (uintptr_t)keyCode)
    {
        return kStatus_Fail;
    }

    /* only work with aligned key */
    if (0x3u & (uintptr_t)key)
    {
        return kStatus_Fail;
    }

    /* check that keyCodeSize is correct for given keySize */
    if (keyCodeSize < PUF_GET_KEY_CODE_SIZE_FOR_KEY_SIZE(keySize))
    {
        return kStatus_InvalidArgument;
    }

    keyIndex = 0x0Fu & keyCode[1];

    /* check the Key Code header byte 1. index must be non-zero for the register key. */
    if (kPUF_KeyIndex_00 == (puf_key_index_register_t)keyIndex)
    {
        return kStatus_Fail;
    }

    keyCodeAligned = (uint32_t *)(uintptr_t)keyCode;
    keyAligned = (uint32_t *)(uintptr_t)key;

    /* begin */
    base->CTRL = PUF_CTRL_GETKEY_MASK;

    /* wait till command is accepted */
    while (0 == (base->STAT & (PUF_STAT_BUSY_MASK | PUF_STAT_ERROR_MASK)))
    {
    }

    /* while busy send KC, read key */
    while (0 != (base->STAT & PUF_STAT_BUSY_MASK))
    {
        if (0 != (PUF_STAT_CODEINREQ_MASK & base->STAT))
        {
            temp32 = 0;
            if (keyCodeSize >= sizeof(uint32_t))
            {
                temp32 = *keyCodeAligned;
                keyCodeAligned++;
                keyCodeSize -= sizeof(uint32_t);
            }
            base->CODEINPUT = temp32;
        }

        if (0 != (PUF_STAT_KEYOUTAVAIL_MASK & base->STAT))
        {
            keyIndex = base->KEYOUTINDEX;
            temp32 = base->KEYOUTPUT;
            if (keySize >= sizeof(uint32_t))
            {
                *keyAligned = temp32;
                keyAligned++;
                keySize -= sizeof(uint32_t);
            }
        }
    }

    /* get status */
    if ((keyIndex) && (0 != (base->STAT & PUF_STAT_SUCCESS_MASK)))
    {
        status = kStatus_Success;
    }

    return status;
}

/*!
 * brief Zeroize PUF
 *
 * This function clears all PUF internal logic and puts the PUF to error state.
 *
 * param base PUF peripheral base address
 * return Status of the zeroize operation.
 */
status_t PUF_Zeroize(PUF_Type *base)
{
    status_t status = kStatus_Fail;

    /* zeroize command is always allowed */
    base->CTRL = PUF_CTRL_ZEROIZE_MASK;

    /* check that command is accepted */
    if ((0 != (base->STAT & PUF_STAT_ERROR_MASK)) && (0 == base->ALLOW))
    {
        status = kStatus_Success;
    }

    return status;
}