/* * The Clear BSD License * Copyright (c) 2015, Freescale Semiconductor, Inc. * Copyright 2016-2017 NXP * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted (subject to the limitations in the disclaimer below) provided * that the following conditions are met: * * o Redistributions of source code must retain the above copyright notice, this list * of conditions and the following disclaimer. * * o Redistributions in binary form must reproduce the above copyright notice, this * list of conditions and the following disclaimer in the documentation and/or * other materials provided with the distribution. * * o Neither the name of the copyright holder nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS LICENSE. * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef _FSL_FTM_H_ #define _FSL_FTM_H_ #include "fsl_common.h" /*! * @addtogroup ftm * @{ */ /******************************************************************************* * Definitions ******************************************************************************/ /*! @name Driver version */ /*@{*/ #define FSL_FTM_DRIVER_VERSION (MAKE_VERSION(2, 0, 4)) /*!< Version 2.0.4 */ /*@}*/ /*! * @brief List of FTM channels * @note Actual number of available channels is SoC dependent */ typedef enum _ftm_chnl { kFTM_Chnl_0 = 0U, /*!< FTM channel number 0*/ kFTM_Chnl_1, /*!< FTM channel number 1 */ kFTM_Chnl_2, /*!< FTM channel number 2 */ kFTM_Chnl_3, /*!< FTM channel number 3 */ kFTM_Chnl_4, /*!< FTM channel number 4 */ kFTM_Chnl_5, /*!< FTM channel number 5 */ kFTM_Chnl_6, /*!< FTM channel number 6 */ kFTM_Chnl_7 /*!< FTM channel number 7 */ } ftm_chnl_t; /*! @brief List of FTM faults */ typedef enum _ftm_fault_input { kFTM_Fault_0 = 0U, /*!< FTM fault 0 input pin */ kFTM_Fault_1, /*!< FTM fault 1 input pin */ kFTM_Fault_2, /*!< FTM fault 2 input pin */ kFTM_Fault_3 /*!< FTM fault 3 input pin */ } ftm_fault_input_t; /*! @brief FTM PWM operation modes */ typedef enum _ftm_pwm_mode { kFTM_EdgeAlignedPwm = 0U, /*!< Edge-aligned PWM */ kFTM_CenterAlignedPwm, /*!< Center-aligned PWM */ kFTM_CombinedPwm /*!< Combined PWM */ } ftm_pwm_mode_t; /*! @brief FTM PWM output pulse mode: high-true, low-true or no output */ typedef enum _ftm_pwm_level_select { kFTM_NoPwmSignal = 0U, /*!< No PWM output on pin */ kFTM_LowTrue, /*!< Low true pulses */ kFTM_HighTrue /*!< High true pulses */ } ftm_pwm_level_select_t; /*! @brief Options to configure a FTM channel's PWM signal */ typedef struct _ftm_chnl_pwm_signal_param { ftm_chnl_t chnlNumber; /*!< The channel/channel pair number. In combined mode, this represents the channel pair number. */ ftm_pwm_level_select_t level; /*!< PWM output active level select. */ uint8_t dutyCyclePercent; /*!< PWM pulse width, value should be between 0 to 100 0 = inactive signal(0% duty cycle)... 100 = always active signal (100% duty cycle).*/ uint8_t firstEdgeDelayPercent; /*!< Used only in combined PWM mode to generate an asymmetrical PWM. Specifies the delay to the first edge in a PWM period. If unsure leave as 0; Should be specified as a percentage of the PWM period */ } ftm_chnl_pwm_signal_param_t; /*! @brief FlexTimer output compare mode */ typedef enum _ftm_output_compare_mode { kFTM_NoOutputSignal = (1U << FTM_CnSC_MSA_SHIFT), /*!< No channel output when counter reaches CnV */ kFTM_ToggleOnMatch = ((1U << FTM_CnSC_MSA_SHIFT) | (1U << FTM_CnSC_ELSA_SHIFT)), /*!< Toggle output */ kFTM_ClearOnMatch = ((1U << FTM_CnSC_MSA_SHIFT) | (2U << FTM_CnSC_ELSA_SHIFT)), /*!< Clear output */ kFTM_SetOnMatch = ((1U << FTM_CnSC_MSA_SHIFT) | (3U << FTM_CnSC_ELSA_SHIFT)) /*!< Set output */ } ftm_output_compare_mode_t; /*! @brief FlexTimer input capture edge */ typedef enum _ftm_input_capture_edge { kFTM_RisingEdge = (1U << FTM_CnSC_ELSA_SHIFT), /*!< Capture on rising edge only*/ kFTM_FallingEdge = (2U << FTM_CnSC_ELSA_SHIFT), /*!< Capture on falling edge only*/ kFTM_RiseAndFallEdge = (3U << FTM_CnSC_ELSA_SHIFT) /*!< Capture on rising or falling edge */ } ftm_input_capture_edge_t; /*! @brief FlexTimer dual edge capture modes */ typedef enum _ftm_dual_edge_capture_mode { kFTM_OneShot = 0U, /*!< One-shot capture mode */ kFTM_Continuous = (1U << FTM_CnSC_MSA_SHIFT) /*!< Continuous capture mode */ } ftm_dual_edge_capture_mode_t; /*! @brief FlexTimer dual edge capture parameters */ typedef struct _ftm_dual_edge_capture_param { ftm_dual_edge_capture_mode_t mode; /*!< Dual Edge Capture mode */ ftm_input_capture_edge_t currChanEdgeMode; /*!< Input capture edge select for channel n */ ftm_input_capture_edge_t nextChanEdgeMode; /*!< Input capture edge select for channel n+1 */ } ftm_dual_edge_capture_param_t; /*! @brief FlexTimer quadrature decode modes */ typedef enum _ftm_quad_decode_mode { kFTM_QuadPhaseEncode = 0U, /*!< Phase A and Phase B encoding mode */ kFTM_QuadCountAndDir /*!< Count and direction encoding mode */ } ftm_quad_decode_mode_t; /*! @brief FlexTimer quadrature phase polarities */ typedef enum _ftm_phase_polarity { kFTM_QuadPhaseNormal = 0U, /*!< Phase input signal is not inverted */ kFTM_QuadPhaseInvert /*!< Phase input signal is inverted */ } ftm_phase_polarity_t; /*! @brief FlexTimer quadrature decode phase parameters */ typedef struct _ftm_phase_param { bool enablePhaseFilter; /*!< True: enable phase filter; false: disable filter */ uint32_t phaseFilterVal; /*!< Filter value, used only if phase filter is enabled */ ftm_phase_polarity_t phasePolarity; /*!< Phase polarity */ } ftm_phase_params_t; /*! @brief Structure is used to hold the parameters to configure a FTM fault */ typedef struct _ftm_fault_param { bool enableFaultInput; /*!< True: Fault input is enabled; false: Fault input is disabled */ bool faultLevel; /*!< True: Fault polarity is active low; in other words, '0' indicates a fault; False: Fault polarity is active high */ bool useFaultFilter; /*!< True: Use the filtered fault signal; False: Use the direct path from fault input */ } ftm_fault_param_t; /*! @brief FlexTimer pre-scaler factor for the dead time insertion*/ typedef enum _ftm_deadtime_prescale { kFTM_Deadtime_Prescale_1 = 1U, /*!< Divide by 1 */ kFTM_Deadtime_Prescale_4, /*!< Divide by 4 */ kFTM_Deadtime_Prescale_16 /*!< Divide by 16 */ } ftm_deadtime_prescale_t; /*! @brief FlexTimer clock source selection*/ typedef enum _ftm_clock_source { kFTM_SystemClock = 1U, /*!< System clock selected */ kFTM_FixedClock, /*!< Fixed frequency clock */ kFTM_ExternalClock /*!< External clock */ } ftm_clock_source_t; /*! @brief FlexTimer pre-scaler factor selection for the clock source*/ typedef enum _ftm_clock_prescale { kFTM_Prescale_Divide_1 = 0U, /*!< Divide by 1 */ kFTM_Prescale_Divide_2, /*!< Divide by 2 */ kFTM_Prescale_Divide_4, /*!< Divide by 4 */ kFTM_Prescale_Divide_8, /*!< Divide by 8 */ kFTM_Prescale_Divide_16, /*!< Divide by 16 */ kFTM_Prescale_Divide_32, /*!< Divide by 32 */ kFTM_Prescale_Divide_64, /*!< Divide by 64 */ kFTM_Prescale_Divide_128 /*!< Divide by 128 */ } ftm_clock_prescale_t; /*! @brief Options for the FlexTimer behaviour in BDM Mode */ typedef enum _ftm_bdm_mode { kFTM_BdmMode_0 = 0U, /*!< FTM counter stopped, CH(n)F bit can be set, FTM channels in functional mode, writes to MOD,CNTIN and C(n)V registers bypass the register buffers */ kFTM_BdmMode_1, /*!< FTM counter stopped, CH(n)F bit is not set, FTM channels outputs are forced to their safe value , writes to MOD,CNTIN and C(n)V registers bypass the register buffers */ kFTM_BdmMode_2, /*!< FTM counter stopped, CH(n)F bit is not set, FTM channels outputs are frozen when chip enters in BDM mode, writes to MOD,CNTIN and C(n)V registers bypass the register buffers */ kFTM_BdmMode_3 /*!< FTM counter in functional mode, CH(n)F bit can be set, FTM channels in functional mode, writes to MOD,CNTIN and C(n)V registers is in fully functional mode */ } ftm_bdm_mode_t; /*! @brief Options for the FTM fault control mode */ typedef enum _ftm_fault_mode { kFTM_Fault_Disable = 0U, /*!< Fault control is disabled for all channels */ kFTM_Fault_EvenChnls, /*!< Enabled for even channels only(0,2,4,6) with manual fault clearing */ kFTM_Fault_AllChnlsMan, /*!< Enabled for all channels with manual fault clearing */ kFTM_Fault_AllChnlsAuto /*!< Enabled for all channels with automatic fault clearing */ } ftm_fault_mode_t; /*! * @brief FTM external trigger options * @note Actual available external trigger sources are SoC-specific */ typedef enum _ftm_external_trigger { kFTM_Chnl0Trigger = (1U << 4), /*!< Generate trigger when counter equals chnl 0 CnV reg */ kFTM_Chnl1Trigger = (1U << 5), /*!< Generate trigger when counter equals chnl 1 CnV reg */ kFTM_Chnl2Trigger = (1U << 0), /*!< Generate trigger when counter equals chnl 2 CnV reg */ kFTM_Chnl3Trigger = (1U << 1), /*!< Generate trigger when counter equals chnl 3 CnV reg */ kFTM_Chnl4Trigger = (1U << 2), /*!< Generate trigger when counter equals chnl 4 CnV reg */ kFTM_Chnl5Trigger = (1U << 3), /*!< Generate trigger when counter equals chnl 5 CnV reg */ kFTM_Chnl6Trigger = (1U << 8), /*!< Available on certain SoC's, generate trigger when counter equals chnl 6 CnV reg */ kFTM_Chnl7Trigger = (1U << 9), /*!< Available on certain SoC's, generate trigger when counter equals chnl 7 CnV reg */ kFTM_InitTrigger = (1U << 6), /*!< Generate Trigger when counter is updated with CNTIN */ kFTM_ReloadInitTrigger = (1U << 7) /*!< Available on certain SoC's, trigger on reload point */ } ftm_external_trigger_t; /*! @brief FlexTimer PWM sync options to update registers with buffer */ typedef enum _ftm_pwm_sync_method { kFTM_SoftwareTrigger = FTM_SYNC_SWSYNC_MASK, /*!< Software triggers PWM sync */ kFTM_HardwareTrigger_0 = FTM_SYNC_TRIG0_MASK, /*!< Hardware trigger 0 causes PWM sync */ kFTM_HardwareTrigger_1 = FTM_SYNC_TRIG1_MASK, /*!< Hardware trigger 1 causes PWM sync */ kFTM_HardwareTrigger_2 = FTM_SYNC_TRIG2_MASK /*!< Hardware trigger 2 causes PWM sync */ } ftm_pwm_sync_method_t; /*! * @brief FTM options available as loading point for register reload * @note Actual available reload points are SoC-specific */ typedef enum _ftm_reload_point { kFTM_Chnl0Match = (1U << 0), /*!< Channel 0 match included as a reload point */ kFTM_Chnl1Match = (1U << 1), /*!< Channel 1 match included as a reload point */ kFTM_Chnl2Match = (1U << 2), /*!< Channel 2 match included as a reload point */ kFTM_Chnl3Match = (1U << 3), /*!< Channel 3 match included as a reload point */ kFTM_Chnl4Match = (1U << 4), /*!< Channel 4 match included as a reload point */ kFTM_Chnl5Match = (1U << 5), /*!< Channel 5 match included as a reload point */ kFTM_Chnl6Match = (1U << 6), /*!< Channel 6 match included as a reload point */ kFTM_Chnl7Match = (1U << 7), /*!< Channel 7 match included as a reload point */ kFTM_CntMax = (1U << 8), /*!< Use in up-down count mode only, reload when counter reaches the maximum value */ kFTM_CntMin = (1U << 9), /*!< Use in up-down count mode only, reload when counter reaches the minimum value */ kFTM_HalfCycMatch = (1U << 10) /*!< Available on certain SoC's, half cycle match reload point */ } ftm_reload_point_t; /*! * @brief List of FTM interrupts * @note Actual available interrupts are SoC-specific */ typedef enum _ftm_interrupt_enable { kFTM_Chnl0InterruptEnable = (1U << 0), /*!< Channel 0 interrupt */ kFTM_Chnl1InterruptEnable = (1U << 1), /*!< Channel 1 interrupt */ kFTM_Chnl2InterruptEnable = (1U << 2), /*!< Channel 2 interrupt */ kFTM_Chnl3InterruptEnable = (1U << 3), /*!< Channel 3 interrupt */ kFTM_Chnl4InterruptEnable = (1U << 4), /*!< Channel 4 interrupt */ kFTM_Chnl5InterruptEnable = (1U << 5), /*!< Channel 5 interrupt */ kFTM_Chnl6InterruptEnable = (1U << 6), /*!< Channel 6 interrupt */ kFTM_Chnl7InterruptEnable = (1U << 7), /*!< Channel 7 interrupt */ kFTM_FaultInterruptEnable = (1U << 8), /*!< Fault interrupt */ kFTM_TimeOverflowInterruptEnable = (1U << 9), /*!< Time overflow interrupt */ kFTM_ReloadInterruptEnable = (1U << 10) /*!< Reload interrupt; Available only on certain SoC's */ } ftm_interrupt_enable_t; /*! * @brief List of FTM flags * @note Actual available flags are SoC-specific */ typedef enum _ftm_status_flags { kFTM_Chnl0Flag = (1U << 0), /*!< Channel 0 Flag */ kFTM_Chnl1Flag = (1U << 1), /*!< Channel 1 Flag */ kFTM_Chnl2Flag = (1U << 2), /*!< Channel 2 Flag */ kFTM_Chnl3Flag = (1U << 3), /*!< Channel 3 Flag */ kFTM_Chnl4Flag = (1U << 4), /*!< Channel 4 Flag */ kFTM_Chnl5Flag = (1U << 5), /*!< Channel 5 Flag */ kFTM_Chnl6Flag = (1U << 6), /*!< Channel 6 Flag */ kFTM_Chnl7Flag = (1U << 7), /*!< Channel 7 Flag */ kFTM_FaultFlag = (1U << 8), /*!< Fault Flag */ kFTM_TimeOverflowFlag = (1U << 9), /*!< Time overflow Flag */ kFTM_ChnlTriggerFlag = (1U << 10), /*!< Channel trigger Flag */ kFTM_ReloadFlag = (1U << 11) /*!< Reload Flag; Available only on certain SoC's */ } ftm_status_flags_t; #if !(defined(FSL_FEATURE_FTM_HAS_NO_QDCTRL) && FSL_FEATURE_FTM_HAS_NO_QDCTRL) /*! * @brief List of FTM Quad Decoder flags. */ enum _ftm_quad_decoder_flags { kFTM_QuadDecoderCountingIncreaseFlag = FTM_QDCTRL_QUADIR_MASK, /*!< Counting direction is increasing (FTM counter increment), or the direction is decreasing. */ kFTM_QuadDecoderCountingOverflowOnTopFlag = FTM_QDCTRL_TOFDIR_MASK, /*!< Indicates if the TOF bit was set on the top or the bottom of counting. */ }; #endif /*! * @brief FTM configuration structure * * This structure holds the configuration settings for the FTM peripheral. To initialize this * structure to reasonable defaults, call the FTM_GetDefaultConfig() function and pass a * pointer to the configuration structure instance. * * The configuration structure can be made constant so as to reside in flash. */ typedef struct _ftm_config { ftm_clock_prescale_t prescale; /*!< FTM clock prescale value */ ftm_bdm_mode_t bdmMode; /*!< FTM behavior in BDM mode */ uint32_t pwmSyncMode; /*!< Synchronization methods to use to update buffered registers; Multiple update modes can be used by providing an OR'ed list of options available in enumeration ::ftm_pwm_sync_method_t. */ uint32_t reloadPoints; /*!< FTM reload points; When using this, the PWM synchronization is not required. Multiple reload points can be used by providing an OR'ed list of options available in enumeration ::ftm_reload_point_t. */ ftm_fault_mode_t faultMode; /*!< FTM fault control mode */ uint8_t faultFilterValue; /*!< Fault input filter value */ ftm_deadtime_prescale_t deadTimePrescale; /*!< The dead time prescalar value */ uint32_t deadTimeValue; /*!< The dead time value deadTimeValue's available range is 0-1023 when register has DTVALEX, otherwise its available range is 0-63. */ uint32_t extTriggers; /*!< External triggers to enable. Multiple trigger sources can be enabled by providing an OR'ed list of options available in enumeration ::ftm_external_trigger_t. */ uint8_t chnlInitState; /*!< Defines the initialization value of the channels in OUTINT register */ uint8_t chnlPolarity; /*!< Defines the output polarity of the channels in POL register */ bool useGlobalTimeBase; /*!< True: Use of an external global time base is enabled; False: disabled */ } ftm_config_t; /******************************************************************************* * API ******************************************************************************/ #if defined(__cplusplus) extern "C" { #endif /*! * @name Initialization and deinitialization * @{ */ /*! * @brief Ungates the FTM clock and configures the peripheral for basic operation. * * @note This API should be called at the beginning of the application which is using the FTM driver. * * @param base FTM peripheral base address * @param config Pointer to the user configuration structure. * * @return kStatus_Success indicates success; Else indicates failure. */ status_t FTM_Init(FTM_Type *base, const ftm_config_t *config); /*! * @brief Gates the FTM clock. * * @param base FTM peripheral base address */ void FTM_Deinit(FTM_Type *base); /*! * @brief Fills in the FTM configuration structure with the default settings. * * The default values are: * @code * config->prescale = kFTM_Prescale_Divide_1; * config->bdmMode = kFTM_BdmMode_0; * config->pwmSyncMode = kFTM_SoftwareTrigger; * config->reloadPoints = 0; * config->faultMode = kFTM_Fault_Disable; * config->faultFilterValue = 0; * config->deadTimePrescale = kFTM_Deadtime_Prescale_1; * config->deadTimeValue = 0; * config->extTriggers = 0; * config->chnlInitState = 0; * config->chnlPolarity = 0; * config->useGlobalTimeBase = false; * @endcode * @param config Pointer to the user configuration structure. */ void FTM_GetDefaultConfig(ftm_config_t *config); /*! @}*/ /*! * @name Channel mode operations * @{ */ /*! * @brief Configures the PWM signal parameters. * * Call this function to configure the PWM signal period, mode, duty cycle, and edge. Use this * function to configure all FTM channels that are used to output a PWM signal. * * @param base FTM peripheral base address * @param chnlParams Array of PWM channel parameters to configure the channel(s) * @param numOfChnls Number of channels to configure; This should be the size of the array passed in * @param mode PWM operation mode, options available in enumeration ::ftm_pwm_mode_t * @param pwmFreq_Hz PWM signal frequency in Hz * @param srcClock_Hz FTM counter clock in Hz * * @return kStatus_Success if the PWM setup was successful * kStatus_Error on failure */ status_t FTM_SetupPwm(FTM_Type *base, const ftm_chnl_pwm_signal_param_t *chnlParams, uint8_t numOfChnls, ftm_pwm_mode_t mode, uint32_t pwmFreq_Hz, uint32_t srcClock_Hz); /*! * @brief Updates the duty cycle of an active PWM signal. * * @param base FTM peripheral base address * @param chnlNumber The channel/channel pair number. In combined mode, this represents * the channel pair number * @param currentPwmMode The current PWM mode set during PWM setup * @param dutyCyclePercent New PWM pulse width; The value should be between 0 to 100 * 0=inactive signal(0% duty cycle)... * 100=active signal (100% duty cycle) */ void FTM_UpdatePwmDutycycle(FTM_Type *base, ftm_chnl_t chnlNumber, ftm_pwm_mode_t currentPwmMode, uint8_t dutyCyclePercent); /*! * @brief Updates the edge level selection for a channel. * * @param base FTM peripheral base address * @param chnlNumber The channel number * @param level The level to be set to the ELSnB:ELSnA field; Valid values are 00, 01, 10, 11. * See the Kinetis SoC reference manual for details about this field. */ void FTM_UpdateChnlEdgeLevelSelect(FTM_Type *base, ftm_chnl_t chnlNumber, uint8_t level); /*! * @brief Enables capturing an input signal on the channel using the function parameters. * * When the edge specified in the captureMode argument occurs on the channel, the FTM counter is * captured into the CnV register. The user has to read the CnV register separately to get this * value. The filter function is disabled if the filterVal argument passed in is 0. The filter * function is available only for channels 0, 1, 2, 3. * * @param base FTM peripheral base address * @param chnlNumber The channel number * @param captureMode Specifies which edge to capture * @param filterValue Filter value, specify 0 to disable filter. Available only for channels 0-3. */ void FTM_SetupInputCapture(FTM_Type *base, ftm_chnl_t chnlNumber, ftm_input_capture_edge_t captureMode, uint32_t filterValue); /*! * @brief Configures the FTM to generate timed pulses. * * When the FTM counter matches the value of compareVal argument (this is written into CnV reg), * the channel output is changed based on what is specified in the compareMode argument. * * @param base FTM peripheral base address * @param chnlNumber The channel number * @param compareMode Action to take on the channel output when the compare condition is met * @param compareValue Value to be programmed in the CnV register. */ void FTM_SetupOutputCompare(FTM_Type *base, ftm_chnl_t chnlNumber, ftm_output_compare_mode_t compareMode, uint32_t compareValue); /*! * @brief Configures the dual edge capture mode of the FTM. * * This function sets up the dual edge capture mode on a channel pair. The capture edge for the * channel pair and the capture mode (one-shot or continuous) is specified in the parameter * argument. The filter function is disabled if the filterVal argument passed is zero. The filter * function is available only on channels 0 and 2. The user has to read the channel CnV registers * separately to get the capture values. * * @param base FTM peripheral base address * @param chnlPairNumber The FTM channel pair number; options are 0, 1, 2, 3 * @param edgeParam Sets up the dual edge capture function * @param filterValue Filter value, specify 0 to disable filter. Available only for channel pair 0 and 1. */ void FTM_SetupDualEdgeCapture(FTM_Type *base, ftm_chnl_t chnlPairNumber, const ftm_dual_edge_capture_param_t *edgeParam, uint32_t filterValue); /*! @}*/ /*! * @brief Sets up the working of the FTM fault protection. * * FTM can have up to 4 fault inputs. This function sets up fault parameters, fault level, and a filter. * * @param base FTM peripheral base address * @param faultNumber FTM fault to configure. * @param faultParams Parameters passed in to set up the fault */ void FTM_SetupFault(FTM_Type *base, ftm_fault_input_t faultNumber, const ftm_fault_param_t *faultParams); /*! * @name Interrupt Interface * @{ */ /*! * @brief Enables the selected FTM interrupts. * * @param base FTM peripheral base address * @param mask The interrupts to enable. This is a logical OR of members of the * enumeration ::ftm_interrupt_enable_t */ void FTM_EnableInterrupts(FTM_Type *base, uint32_t mask); /*! * @brief Disables the selected FTM interrupts. * * @param base FTM peripheral base address * @param mask The interrupts to enable. This is a logical OR of members of the * enumeration ::ftm_interrupt_enable_t */ void FTM_DisableInterrupts(FTM_Type *base, uint32_t mask); /*! * @brief Gets the enabled FTM interrupts. * * @param base FTM peripheral base address * * @return The enabled interrupts. This is the logical OR of members of the * enumeration ::ftm_interrupt_enable_t */ uint32_t FTM_GetEnabledInterrupts(FTM_Type *base); /*! @}*/ /*! * @name Status Interface * @{ */ /*! * @brief Gets the FTM status flags. * * @param base FTM peripheral base address * * @return The status flags. This is the logical OR of members of the * enumeration ::ftm_status_flags_t */ uint32_t FTM_GetStatusFlags(FTM_Type *base); /*! * @brief Clears the FTM status flags. * * @param base FTM peripheral base address * @param mask The status flags to clear. This is a logical OR of members of the * enumeration ::ftm_status_flags_t */ void FTM_ClearStatusFlags(FTM_Type *base, uint32_t mask); /*! @}*/ /*! * @name Read and write the timer period * @{ */ /*! * @brief Sets the timer period in units of ticks. * * Timers counts from 0 until it equals the count value set here. The count value is written to * the MOD register. * * @note * 1. This API allows the user to use the FTM module as a timer. Do not mix usage * of this API with FTM's PWM setup API's. * 2. Call the utility macros provided in the fsl_common.h to convert usec or msec to ticks. * * @param base FTM peripheral base address * @param ticks A timer period in units of ticks, which should be equal or greater than 1. */ static inline void FTM_SetTimerPeriod(FTM_Type *base, uint32_t ticks) { base->MOD = ticks; } /*! * @brief Reads the current timer counting value. * * This function returns the real-time timer counting value in a range from 0 to a * timer period. * * @note Call the utility macros provided in the fsl_common.h to convert ticks to usec or msec. * * @param base FTM peripheral base address * * @return The current counter value in ticks */ static inline uint32_t FTM_GetCurrentTimerCount(FTM_Type *base) { return (uint32_t)((base->CNT & FTM_CNT_COUNT_MASK) >> FTM_CNT_COUNT_SHIFT); } /*! @}*/ /*! * @name Timer Start and Stop * @{ */ /*! * @brief Starts the FTM counter. * * @param base FTM peripheral base address * @param clockSource FTM clock source; After the clock source is set, the counter starts running. */ static inline void FTM_StartTimer(FTM_Type *base, ftm_clock_source_t clockSource) { uint32_t reg = base->SC; reg &= ~(FTM_SC_CLKS_MASK); reg |= FTM_SC_CLKS(clockSource); base->SC = reg; } /*! * @brief Stops the FTM counter. * * @param base FTM peripheral base address */ static inline void FTM_StopTimer(FTM_Type *base) { /* Set clock source to none to disable counter */ base->SC &= ~(FTM_SC_CLKS_MASK); } /*! @}*/ /*! * @name Software output control * @{ */ /*! * @brief Enables or disables the channel software output control. * * @param base FTM peripheral base address * @param chnlNumber Channel to be enabled or disabled * @param value true: channel output is affected by software output control false: channel output is unaffected by software output control */ static inline void FTM_SetSoftwareCtrlEnable(FTM_Type *base, ftm_chnl_t chnlNumber, bool value) { if (value) { base->SWOCTRL |= (1U << chnlNumber); } else { base->SWOCTRL &= ~(1U << chnlNumber); } } /*! * @brief Sets the channel software output control value. * * @param base FTM peripheral base address. * @param chnlNumber Channel to be configured * @param value true to set 1, false to set 0 */ static inline void FTM_SetSoftwareCtrlVal(FTM_Type *base, ftm_chnl_t chnlNumber, bool value) { if (value) { base->SWOCTRL |= (1U << (chnlNumber + FTM_SWOCTRL_CH0OCV_SHIFT)); } else { base->SWOCTRL &= ~(1U << (chnlNumber + FTM_SWOCTRL_CH0OCV_SHIFT)); } } /*! @}*/ /*! * @brief Enables or disables the FTM global time base signal generation to other FTMs. * * @param base FTM peripheral base address * @param enable true to enable, false to disable */ static inline void FTM_SetGlobalTimeBaseOutputEnable(FTM_Type *base, bool enable) { if (enable) { base->CONF |= FTM_CONF_GTBEOUT_MASK; } else { base->CONF &= ~FTM_CONF_GTBEOUT_MASK; } } /*! * @brief Sets the FTM peripheral timer channel output mask. * * @param base FTM peripheral base address * @param chnlNumber Channel to be configured * @param mask true: masked, channel is forced to its inactive state; false: unmasked */ static inline void FTM_SetOutputMask(FTM_Type *base, ftm_chnl_t chnlNumber, bool mask) { if (mask) { base->OUTMASK |= (1U << chnlNumber); } else { base->OUTMASK &= ~(1U << chnlNumber); } } #if defined(FSL_FEATURE_FTM_HAS_ENABLE_PWM_OUTPUT) && (FSL_FEATURE_FTM_HAS_ENABLE_PWM_OUTPUT) /*! * @brief Allows users to enable an output on an FTM channel. * * To enable the PWM channel output call this function with val=true. For input mode, * call this function with val=false. * * @param base FTM peripheral base address * @param chnlNumber Channel to be configured * @param value true: enable output; false: output is disabled, used in input mode */ static inline void FTM_SetPwmOutputEnable(FTM_Type *base, ftm_chnl_t chnlNumber, bool value) { if (value) { base->SC |= (1U << (chnlNumber + FTM_SC_PWMEN0_SHIFT)); } else { base->SC &= ~(1U << (chnlNumber + FTM_SC_PWMEN0_SHIFT)); } } #endif /*! * @name Channel pair operations * @{ */ /*! * @brief This function enables/disables the fault control in a channel pair. * * @param base FTM peripheral base address * @param chnlPairNumber The FTM channel pair number; options are 0, 1, 2, 3 * @param value true: Enable fault control for this channel pair; false: No fault control */ static inline void FTM_SetFaultControlEnable(FTM_Type *base, ftm_chnl_t chnlPairNumber, bool value) { if (value) { base->COMBINE |= (1U << (FTM_COMBINE_FAULTEN0_SHIFT + (FTM_COMBINE_COMBINE1_SHIFT * chnlPairNumber))); } else { base->COMBINE &= ~(1U << (FTM_COMBINE_FAULTEN0_SHIFT + (FTM_COMBINE_COMBINE1_SHIFT * chnlPairNumber))); } } /*! * @brief This function enables/disables the dead time insertion in a channel pair. * * @param base FTM peripheral base address * @param chnlPairNumber The FTM channel pair number; options are 0, 1, 2, 3 * @param value true: Insert dead time in this channel pair; false: No dead time inserted */ static inline void FTM_SetDeadTimeEnable(FTM_Type *base, ftm_chnl_t chnlPairNumber, bool value) { if (value) { base->COMBINE |= (1U << (FTM_COMBINE_DTEN0_SHIFT + (FTM_COMBINE_COMBINE1_SHIFT * chnlPairNumber))); } else { base->COMBINE &= ~(1U << (FTM_COMBINE_DTEN0_SHIFT + (FTM_COMBINE_COMBINE1_SHIFT * chnlPairNumber))); } } /*! * @brief This function enables/disables complementary mode in a channel pair. * * @param base FTM peripheral base address * @param chnlPairNumber The FTM channel pair number; options are 0, 1, 2, 3 * @param value true: enable complementary mode; false: disable complementary mode */ static inline void FTM_SetComplementaryEnable(FTM_Type *base, ftm_chnl_t chnlPairNumber, bool value) { if (value) { base->COMBINE |= (1U << (FTM_COMBINE_COMP0_SHIFT + (FTM_COMBINE_COMBINE1_SHIFT * chnlPairNumber))); } else { base->COMBINE &= ~(1U << (FTM_COMBINE_COMP0_SHIFT + (FTM_COMBINE_COMBINE1_SHIFT * chnlPairNumber))); } } /*! * @brief This function enables/disables inverting control in a channel pair. * * @param base FTM peripheral base address * @param chnlPairNumber The FTM channel pair number; options are 0, 1, 2, 3 * @param value true: enable inverting; false: disable inverting */ static inline void FTM_SetInvertEnable(FTM_Type *base, ftm_chnl_t chnlPairNumber, bool value) { if (value) { base->INVCTRL |= (1U << chnlPairNumber); } else { base->INVCTRL &= ~(1U << chnlPairNumber); } } /*! @}*/ /*! * @name Quad Decoder * @{ */ /*! * @brief Configures the parameters and activates the quadrature decoder mode. * * @param base FTM peripheral base address * @param phaseAParams Phase A configuration parameters * @param phaseBParams Phase B configuration parameters * @param quadMode Selects encoding mode used in quadrature decoder mode */ void FTM_SetupQuadDecode(FTM_Type *base, const ftm_phase_params_t *phaseAParams, const ftm_phase_params_t *phaseBParams, ftm_quad_decode_mode_t quadMode); #if !(defined(FSL_FEATURE_FTM_HAS_NO_QDCTRL) && FSL_FEATURE_FTM_HAS_NO_QDCTRL) /*! * @brief Gets the FTM Quad Decoder flags. * * @param base FTM peripheral base address. * @return Flag mask of FTM Quad Decoder, see #_ftm_quad_decoder_flags. */ static inline uint32_t FTM_GetQuadDecoderFlags(FTM_Type *base) { return base->QDCTRL & (FTM_QDCTRL_QUADIR_MASK | FTM_QDCTRL_TOFDIR_MASK); } #endif /*! * @brief Sets the modulo values for Quad Decoder. * * The modulo values configure the minimum and maximum values that the Quad decoder counter can reach. After the counter goes * over, the counter value goes to the other side and decrease/increase again. * * @param base FTM peripheral base address. * @param startValue The low limit value for Quad Decoder counter. * @param overValue The high limit value for Quad Decoder counter. */ static inline void FTM_SetQuadDecoderModuloValue(FTM_Type *base, uint32_t startValue, uint32_t overValue) { base->CNTIN = startValue; base->MOD = overValue; } /*! * @brief Gets the current Quad Decoder counter value. * * @param base FTM peripheral base address. * @return Current quad Decoder counter value. */ static inline uint32_t FTM_GetQuadDecoderCounterValue(FTM_Type *base) { return base->CNT; } /*! * @brief Clears the current Quad Decoder counter value. * * The counter is set as the initial value. * * @param base FTM peripheral base address. */ static inline void FTM_ClearQuadDecoderCounterValue(FTM_Type *base) { base->CNT = base->CNTIN; } /*! @}*/ /*! * @brief Enables or disables the FTM software trigger for PWM synchronization. * * @param base FTM peripheral base address * @param enable true: software trigger is selected, false: software trigger is not selected */ static inline void FTM_SetSoftwareTrigger(FTM_Type *base, bool enable) { if (enable) { base->SYNC |= FTM_SYNC_SWSYNC_MASK; } else { base->SYNC &= ~FTM_SYNC_SWSYNC_MASK; } } /*! * @brief Enables or disables the FTM write protection. * * @param base FTM peripheral base address * @param enable true: Write-protection is enabled, false: Write-protection is disabled */ static inline void FTM_SetWriteProtection(FTM_Type *base, bool enable) { /* Configure write protection */ if (enable) { base->FMS |= FTM_FMS_WPEN_MASK; } else { base->MODE |= FTM_MODE_WPDIS_MASK; } } #if defined(FSL_FEATURE_FTM_HAS_DMA_SUPPORT) && FSL_FEATURE_FTM_HAS_DMA_SUPPORT /*! * @brief Enable DMA transfer or not. * * Note: CHnIE bit needs to be set when calling this API. The channel DMA transfer request * is generated and the channel interrupt is not generated if (CHnF = 1) when DMA and CHnIE * bits are set. * * @param base FTM peripheral base address. * @param chnlNumber Channel to be configured * @param enable true to enable, false to disable */ static inline void FTM_EnableDmaTransfer(FTM_Type *base, ftm_chnl_t chnlNumber, bool enable) { if (enable) { /* Enable DMA transfer */ base->CONTROLS[chnlNumber].CnSC |= FTM_CnSC_DMA_MASK; } else { /* Disable DMA transfer */ base->CONTROLS[chnlNumber].CnSC &= ~FTM_CnSC_DMA_MASK; } } #endif /* FSL_FEATURE_FTM_HAS_DMA_SUPPORT */ #if defined(__cplusplus) } #endif /*! @}*/ #endif /* _FSL_FTM_H_*/