/* * The Clear BSD License * Copyright (c) 2015 - 2016, Freescale Semiconductor, Inc. * Copyright 2016-2017 NXP * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted (subject to the limitations in the disclaimer below) provided * that the following conditions are met: * * o Redistributions of source code must retain the above copyright notice, this list * of conditions and the following disclaimer. * * o Redistributions in binary form must reproduce the above copyright notice, this * list of conditions and the following disclaimer in the documentation and/or * other materials provided with the distribution. * * o Neither the name of the copyright holder nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS LICENSE. * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include "fsl_sysmpu.h" /******************************************************************************* * Variables ******************************************************************************/ #if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) const clock_ip_name_t g_sysmpuClock[FSL_FEATURE_SOC_SYSMPU_COUNT] = SYSMPU_CLOCKS; #endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */ /******************************************************************************* * Codes ******************************************************************************/ void SYSMPU_Init(SYSMPU_Type *base, const sysmpu_config_t *config) { assert(config); uint8_t count; #if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) /* Un-gate SYSMPU clock */ CLOCK_EnableClock(g_sysmpuClock[0]); #endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */ /* Initializes the regions. */ for (count = 1; count < FSL_FEATURE_SYSMPU_DESCRIPTOR_COUNT; count++) { base->WORD[count][3] = 0; /* VLD/VID+PID. */ base->WORD[count][0] = 0; /* Start address. */ base->WORD[count][1] = 0; /* End address. */ base->WORD[count][2] = 0; /* Access rights. */ base->RGDAAC[count] = 0; /* Alternate access rights. */ } /* SYSMPU configure. */ while (config) { SYSMPU_SetRegionConfig(base, &(config->regionConfig)); config = config->next; } /* Enable SYSMPU. */ SYSMPU_Enable(base, true); } void SYSMPU_Deinit(SYSMPU_Type *base) { /* Disable SYSMPU. */ SYSMPU_Enable(base, false); #if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) /* Gate the clock. */ CLOCK_DisableClock(g_sysmpuClock[0]); #endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */ } void SYSMPU_GetHardwareInfo(SYSMPU_Type *base, sysmpu_hardware_info_t *hardwareInform) { assert(hardwareInform); uint32_t cesReg = base->CESR; hardwareInform->hardwareRevisionLevel = (cesReg & SYSMPU_CESR_HRL_MASK) >> SYSMPU_CESR_HRL_SHIFT; hardwareInform->slavePortsNumbers = (cesReg & SYSMPU_CESR_NSP_MASK) >> SYSMPU_CESR_NSP_SHIFT; hardwareInform->regionsNumbers = (sysmpu_region_total_num_t)((cesReg & SYSMPU_CESR_NRGD_MASK) >> SYSMPU_CESR_NRGD_SHIFT); } void SYSMPU_SetRegionConfig(SYSMPU_Type *base, const sysmpu_region_config_t *regionConfig) { assert(regionConfig); assert(regionConfig->regionNum < FSL_FEATURE_SYSMPU_DESCRIPTOR_COUNT); uint32_t wordReg = 0; uint8_t msPortNum; uint8_t regNumber = regionConfig->regionNum; /* The start and end address of the region descriptor. */ base->WORD[regNumber][0] = regionConfig->startAddress; base->WORD[regNumber][1] = regionConfig->endAddress; /* Set the privilege rights for master 0 ~ master 3. */ for (msPortNum = 0; msPortNum < SYSMPU_MASTER_RWATTRIBUTE_START_PORT; msPortNum++) { wordReg |= SYSMPU_REGION_RWXRIGHTS_MASTER( msPortNum, (((uint32_t)regionConfig->accessRights1[msPortNum].superAccessRights << 3U) | (uint32_t)regionConfig->accessRights1[msPortNum].userAccessRights)); #if FSL_FEATURE_SYSMPU_HAS_PROCESS_IDENTIFIER wordReg |= SYSMPU_REGION_RWXRIGHTS_MASTER_PE(msPortNum, regionConfig->accessRights1[msPortNum].processIdentifierEnable); #endif /* FSL_FEATURE_SYSMPU_HAS_PROCESS_IDENTIFIER */ } #if FSL_FEATURE_SYSMPU_MASTER_COUNT > SYSMPU_MASTER_RWATTRIBUTE_START_PORT /* Set the normal read write rights for master 4 ~ master 7. */ for (msPortNum = SYSMPU_MASTER_RWATTRIBUTE_START_PORT; msPortNum < FSL_FEATURE_SYSMPU_MASTER_COUNT; msPortNum++) { wordReg |= SYSMPU_REGION_RWRIGHTS_MASTER(msPortNum, ((uint32_t)regionConfig->accessRights2[msPortNum - SYSMPU_MASTER_RWATTRIBUTE_START_PORT].readEnable << 1U | (uint32_t)regionConfig->accessRights2[msPortNum - SYSMPU_MASTER_RWATTRIBUTE_START_PORT].writeEnable)); } #endif /* FSL_FEATURE_SYSMPU_MASTER_COUNT > SYSMPU_MASTER_RWATTRIBUTE_START_PORT */ /* Set region descriptor access rights. */ base->WORD[regNumber][2] = wordReg; wordReg = SYSMPU_WORD_VLD(1); #if FSL_FEATURE_SYSMPU_HAS_PROCESS_IDENTIFIER wordReg |= SYSMPU_WORD_PID(regionConfig->processIdentifier) | SYSMPU_WORD_PIDMASK(regionConfig->processIdMask); #endif /* FSL_FEATURE_SYSMPU_HAS_PROCESS_IDENTIFIER */ base->WORD[regNumber][3] = wordReg; } void SYSMPU_SetRegionAddr(SYSMPU_Type *base, uint32_t regionNum, uint32_t startAddr, uint32_t endAddr) { assert(regionNum < FSL_FEATURE_SYSMPU_DESCRIPTOR_COUNT); base->WORD[regionNum][0] = startAddr; base->WORD[regionNum][1] = endAddr; } void SYSMPU_SetRegionRwxMasterAccessRights(SYSMPU_Type *base, uint32_t regionNum, uint32_t masterNum, const sysmpu_rwxrights_master_access_control_t *accessRights) { assert(accessRights); assert(regionNum < FSL_FEATURE_SYSMPU_DESCRIPTOR_COUNT); assert(masterNum < SYSMPU_MASTER_RWATTRIBUTE_START_PORT); uint32_t mask = SYSMPU_REGION_RWXRIGHTS_MASTER_MASK(masterNum); uint32_t right = base->RGDAAC[regionNum]; #if FSL_FEATURE_SYSMPU_HAS_PROCESS_IDENTIFIER mask |= SYSMPU_REGION_RWXRIGHTS_MASTER_PE_MASK(masterNum); #endif /* Build rights control value. */ right &= ~mask; right |= SYSMPU_REGION_RWXRIGHTS_MASTER( masterNum, ((uint32_t)(accessRights->superAccessRights << 3U) | accessRights->userAccessRights)); #if FSL_FEATURE_SYSMPU_HAS_PROCESS_IDENTIFIER right |= SYSMPU_REGION_RWXRIGHTS_MASTER_PE(masterNum, accessRights->processIdentifierEnable); #endif /* FSL_FEATURE_SYSMPU_HAS_PROCESS_IDENTIFIER */ /* Set low master region access rights. */ base->RGDAAC[regionNum] = right; } #if FSL_FEATURE_SYSMPU_MASTER_COUNT > 4 void SYSMPU_SetRegionRwMasterAccessRights(SYSMPU_Type *base, uint32_t regionNum, uint32_t masterNum, const sysmpu_rwrights_master_access_control_t *accessRights) { assert(accessRights); assert(regionNum < FSL_FEATURE_SYSMPU_DESCRIPTOR_COUNT); assert(masterNum >= SYSMPU_MASTER_RWATTRIBUTE_START_PORT); assert(masterNum <= (FSL_FEATURE_SYSMPU_MASTER_COUNT - 1)); uint32_t mask = SYSMPU_REGION_RWRIGHTS_MASTER_MASK(masterNum); uint32_t right = base->RGDAAC[regionNum]; /* Build rights control value. */ right &= ~mask; right |= SYSMPU_REGION_RWRIGHTS_MASTER(masterNum, (((uint32_t)accessRights->readEnable << 1U) | accessRights->writeEnable)); /* Set low master region access rights. */ base->RGDAAC[regionNum] = right; } #endif /* FSL_FEATURE_SYSMPU_MASTER_COUNT > 4 */ bool SYSMPU_GetSlavePortErrorStatus(SYSMPU_Type *base, sysmpu_slave_t slaveNum) { uint8_t sperr; sperr = ((base->CESR & SYSMPU_CESR_SPERR_MASK) >> SYSMPU_CESR_SPERR_SHIFT) & (0x1U << (FSL_FEATURE_SYSMPU_SLAVE_COUNT - slaveNum - 1)); return (sperr != 0) ? true : false; } void SYSMPU_GetDetailErrorAccessInfo(SYSMPU_Type *base, sysmpu_slave_t slaveNum, sysmpu_access_err_info_t *errInform) { assert(errInform); uint16_t value; uint32_t cesReg; /* Error address. */ errInform->address = base->SP[slaveNum].EAR; /* Error detail information. */ value = (base->SP[slaveNum].EDR & SYSMPU_EDR_EACD_MASK) >> SYSMPU_EDR_EACD_SHIFT; if (!value) { errInform->accessControl = kSYSMPU_NoRegionHit; } else if (!(value & (uint16_t)(value - 1))) { errInform->accessControl = kSYSMPU_NoneOverlappRegion; } else { errInform->accessControl = kSYSMPU_OverlappRegion; } value = base->SP[slaveNum].EDR; errInform->master = (uint32_t)((value & SYSMPU_EDR_EMN_MASK) >> SYSMPU_EDR_EMN_SHIFT); errInform->attributes = (sysmpu_err_attributes_t)((value & SYSMPU_EDR_EATTR_MASK) >> SYSMPU_EDR_EATTR_SHIFT); errInform->accessType = (sysmpu_err_access_type_t)((value & SYSMPU_EDR_ERW_MASK) >> SYSMPU_EDR_ERW_SHIFT); #if FSL_FEATURE_SYSMPU_HAS_PROCESS_IDENTIFIER errInform->processorIdentification = (uint8_t)((value & SYSMPU_EDR_EPID_MASK) >> SYSMPU_EDR_EPID_SHIFT); #endif /* Clears error slave port bit. */ cesReg = (base->CESR & ~SYSMPU_CESR_SPERR_MASK) | ((0x1U << (FSL_FEATURE_SYSMPU_SLAVE_COUNT - slaveNum - 1)) << SYSMPU_CESR_SPERR_SHIFT); base->CESR = cesReg; }